Page 29 - IJB-6-2
P. 29
Zolfagharian, et al.
A A
B
B
C
C
D
Figure 11. Comparison of the three- Figure 12. Heat distribution simulation results of
dimensional-printed splints simulation results topology-optimized (A) 62.50% mass, (B) 71.13%
(A) Maximum Equivalent (von-Mises) stress; mass, (C) 79.49% mass, and (D) original
(B) maximum deflection; (C) average heat dissipation. three-dimensional-printed 100% mass, splints.
International Journal of Bioprinting (2020)–Volume 6, Issue 2 25
