Page 214 - IJB-10-6

International Journal of Bioprinting Effect of G/GO on photocurable resin structure

Ethics approval and consent to participate 10. Zhang G, Song D, Jiang J, et al. Electrically assisted
continuous vat photopolymerization 3D printing for
Not applicable. fabricating high-performance ordered graphene/polymer
composites. Compos B Eng. 2023;250:110449.
Consent for publication doi: 10.1016/j.compositesb.2022.110449
Not applicable. 11. Liang A, Jiang X, Hong X, Jiang Y, Shao Z, Zhu D. Recent
developments concerning the dispersion methods and
Availability of data mechanisms of graphene. Coatings. 2018;8:33.
doi: 10.3390/coatings8010033
Data are available from the corresponding author upon 12. Markandan K, Lai CQ. Enhanced mechanical properties
reasonable request.
of 3D printed graphene-polymer composite lattices at very
low graphene concentrations. Compos A: Appl Sci Manuf.
References 2020;129:105726.
doi: 10.1016/j.compositesa.2019.105726
1. Pazhamannil RV, Govindan P. Current state and future
scope of additive manufacturing technologies via vat 13. de Armentia SL, Fernández-Villamarín S, Ballesteros Y,
photopolymerization. Mater Today Proc. 2021;43:130-136. Del Real JC, Dunne N, Paz E. 3D printing of a graphene-
doi: 10.1016/j.matpr.2020.11.225 modified photopolymer using stereolithography for
biomedical applications: a study of the polymerization
2. Alifui-Segbaya F. Biomedical photopolymers in 3D printing. reaction. Int J Bioprint. 2022;8:503.
RPJ. 2019;26:437-444. doi: 10.18063/ijb.v8i1.503
doi: 10.1108/RPJ-10-2018-0268
14. Holt BD, Wright ZM, Arnold AM, Sydlik SA. Graphene
3. Melchels FPW, Feijen J, Grijpma DW. A review on oxide as a scaffold for bone regeneration. WIREs Nanomed
stereolithography and its applications in biomedical Nanobiotechnol. 2017;9:e1437.
engineering. Biomaterials. 2010;31:6121-6130. doi: 10.1002/wnan.1437
doi: 10.1016/j.biomaterials.2010.04.050
15. Salgado H, Fialho J, Marques M, Vaz M, Figueiral MH,
4. Al Rashid A, Ahmed W, Khalid MY, Koç M. Vat Mesquita P. Mechanical and surface properties of a
photopolymerization of polymers and polymer 3D-printed dental resin reinforced with graphene. J Rpemd.
composites: processes and applications. Addit Manuf. 2021; 2023;64:12-19.
47:102279. doi: 10.24873/j.rpemd.2023.03.1050
doi: 10.1016/j.addma.2021.102279
16. Hanon MM, Ghaly A, Zsidai L, Szakál Z, Szabó I, Kátai
5. Shebeeb CM, Afif MB, Jacob L, Choi D, Butt H. Vat L. Investigations of the mechanical properties of DLP 3D
photopolymerisation 3D printing of graphene-based printed graphene/resin composites. Acta Polytech Hung.
materials. Virt Phys Prototyping. 2013;18:e2276250. 2021;18(8):143-161.
doi: 10.1080/17452759.2023.2276250 doi: 10.12700/APH.18.8.2021.8.8
6. Al Rashid A, Khan SA, Al-Ghamdi SG, Koç M. Additive 17. Lopez De Armentia S, Abenojar J, Ballesteros Y, Del Real
manufacturing of polymer nanocomposites: needs and JC, Dunne N, Paz E. Polymerization kinetics of acrylic
challenges in materials, processes, and applications. J Mater photopolymer loaded with graphene-based nanomaterials
Res Technol. 2021;14:910-941. for additive manufacturing. Nanomaterials. 2022;12:4498.
doi: 10.1016/j.jmrt.2021.07.016 doi: 10.3390/nano12244498
7. Alsaadi M, Hinchy EP, McCarthy CT, Moritz VF, Portela A, 18. Mendes-Felipe C, Patrocinio D, Laza JM, Ruiz-Rubio L,
Devine DM. 3D printing of photocurable resin reinforced Vilas-Vilela JL. Evaluation of postcuring process on the
by functionalised graphene nanoplatelets. Mater Proc. thermal and mechanical properties of the Clear02 resin
TM
2023;14:20. used in stereolithography. Polymer Test. 2018;72:115-121.
doi: 10.3390/IOCN2023-14540 doi: 10.1016/j.polymertesting.2018.10.018
8. Paz E, Forriol F, del Real JC, Dunne N. Graphene oxide 19. Cingesar IK, Marković M-P, Vrsaljko D. Effect of post-
versus graphene for optimisation of PMMA bone processing conditions on polyacrylate materials used in
cement for orthopaedic applications. Mater Sci Eng C. stereolithography. Addit Manuf. 2022;55:102813.
2017;77:1003-1011. doi: 10.1016/j.addma.2022.102813
doi: 10.1016/j.msec.2017.03.269
20. Markandan K, Seetoh IP, Lai CQ. Mechanical anisotropy of
9. He S, Petkovich ND, Liu K, Qian Y, Macosko CW, Stein graphene nanocomposites induced by graphene alignment
A. Unsaturated polyester resin toughening with very low during stereolithography 3D printing. J Mater Res.
loadings of GO derivatives. Polymer. 2017;110:149-157. 2021;36:4262-4274.
doi: 10.1016/j.polymer.2016.12.057 doi: 10.1557/s43578-021-00400-5

Volume 10 Issue 6 (2024) 206 doi: 10.36922/ijb.4075