Page 216 - IJB-10-6

International Journal of Bioprinting Effect of G/GO on photocurable resin structure

43. Shokuhfar A, Arab B. The effect of cross linking density 47. Wan Y-J, Tang L-C, Yan D, et al. Improved dispersion
on the mechanical properties and structure of the epoxy and interface in the graphene/epoxy composites via a
polymers: molecular dynamics simulation. J Mol Model. facile surfactant-assisted process. Compos Sci Technol.
2013;19:3719-3731. 2013;82:60-68.
doi: 10.1007/s00894-013-1906-9 doi: 10.1016/j.compscitech.2013.04.009
44. Gao C, Liu T, Shuai C, Peng S. Enhancement mechanisms 48. Borella PS, Alvares LAS, Ribeiro MTH, et al. Das neves,
of graphene in nano-58S bioactive glass scaffold: physical and mechanical properties of four 3D-printed
mechanical and biological performance. Sci Rep. 2014; resins at two different thick layers: an in vitro comparative
4:4712. study. Dental Mater. 2023;39:686-692.
doi: 10.1038/srep04712
doi: 10.1016/j.dental.2023.06.002
45. Sharif M, Pourabbas B, Sangermano M, et al. The
effect of graphene oxide on UV curing kinetics and 49. Uysal E, Çakir M, Ekici B. Graphene oxide/epoxy acrylate
properties of SU8 nanocomposites. Polym Int. 2017;66: nanocomposite production via SLA and importance
405-417. of graphene oxide surface modification for mechanical
doi: 10.1002/pi.5271 properties. Rapid Prototyping J. 2021;27:682-691.
doi: 10.1108/RPJ-06-2020-0114
46. Moriche R, Artigas J, Reigosa L, Sánchez M, Prolongo SG,
Ureña A. Modifications induced in photocuring of Bis- 50. Alexopoulos ND, Paragkamian Z, Poulin P, Kourkoulis
GMA/TEGDMA by the addition of graphene nanoplatelets SK. Fracture related mechanical properties of low and high
for 3D printable electrically conductive nanocomposites. graphene reinforcement of epoxy nanocomposites. Compos
Compos Sci Technol. 2019;184:107876. Sci Technol. 2017;150:194-204.
doi: 10.1016/j.compscitech.2019.107876 doi: 10.1016/j.compscitech.2017.07.030

Volume 10 Issue 6 (2024) 208 doi: 10.36922/ijb.4075