Page 15 - IJB-7-2
P. 15

Agung, et al.
           Acknowledgments                                         Chapter in Pharmaceutical Manufacturing: 3D-Printed Drug

           We  thank  the  Cipto  Mangunkusumo  General  Hospital   Products. Adv Drug Deliv Rev, 108:39–50.
           and Universitas Indonesia for making the production of      https://doi.org/10.1016/j.addr.2016.03.001
           this article possible.                              9.   Noorani R, 2017, 3D Printing: Technology, Applications, and
                                                                   Selection. CRC Press, United States.
           Conflict of interest                                10.  Ng WL, Chua CK, and Shen YF, 2019, Print Me An Organ!
           No conflict of interest was reported by all authors.    Why We Are Not There Yet. Prog Polym Sci, 97:101145.
                                                                   https://doi.org/10.1016/j.progpolymsci.2019.101145
           Author contribution                                 11.  Jordan JM, 2019, 3D Printing. MIT Press, United States.
           NPA  drafted  the  manuscript  and  prepared  the  review   12.  Pugliese L, Marconi S, Negrello E, et al., 2018, The Clinical
           materials  for  clinical  aspects  in  the  manuscript.  MHN   use of 3D Printing in Surgery. Updates Surg, 70:381–8.
           drafted the manuscript and prepared the review materials      https://doi.org/10.1007/s13304-018-0586-5
           for  technical  aspects  in  the  manuscript.  GAI  provided   13.  Kim  GB,  Lee  S,  Kim  H,  et al.,  2016,  Three-Dimensional
           some clinical insights. CAM supervised the drafting and   Printing: Basic Principles and Applications in Medicine and
           secured the funding.
                                                                   Radiology. Korean J Radiol, 17:182–97.
           References                                          14.  Zheng Y, Yu  D,  Zhao  J,  et  al.,  2016,  3D  Printout  Models
                                                                   vs. 3D-Rendered Images: Which Is Better for Preoperative
           1.   Kamal M, Rizza G. Design for metal additive manufacturing   Planning? J Surg Educ, 73:518–23.
               for  aerospace  applications.  In: Additive  Manufacturing  for      https://doi.org/10.1016/j.jsurg.2016.01.003
               the Aerospace Industry. Amsterdam, Netherlands: Elsevier;   15.  Shilo D, Emodi O, Blanc O, et al., 2018, Printing the Future-
               2019. p. 67-86.                                     Updates in 3D Printing for Surgical Applications. Rambam
               https://doi.org/10.1016/b978-0-12-814062-8.00005-4  Maimonides Med J, 9:e0020.
           2.   Leal  R,  Barreiros  FM,  Alves  L,  et  al.,  2017,  Additive      https://doi.org/10.5041/rmmj.10343
               Manufacturing Tooling for the Automotive Industry. Int J Adv   16.  Smith B, Dasgupta P, 2020, 3D printing Technology and Its
               Manuf Technol, 92:1671–6.                           Role in Urological Training. World J Urol, 38:2385–91.
               https://doi.org/10.1007/s00170-017-0239-8           https://doi.org/10.1007/s00345-019-02995-1
           3.   Roopavath  UK,  Kalaskar  DM,  2017,  1-Introduction  to  3D   17.  Chen  MY,  Skewes  J,  Desselle  M,  et al.,  2020,  Current
               Printing in Medicine. In: Kalaskar DM, editor. 3D Printing in   Applications of Three-Dimensional Printing in Urology: 3D
               Medicine, Woodhead Publishing, United Kingdom, pp. 1–20.  Printing in Urology. BJU Int, 125:17–27.
               https://doi.org/10.1016/b978-0-08-100717-4.00001-6     https://doi.org/10.1111/bju.14928
           4.   O’Brien KW, Xu PA, Levine DJ, et al., 2018, Elastomeric   18.  Mathews  DA,  Baird  A,  Lucky  M,  2020,  Innovation  in
               Passive  Transmission  for  Autonomous  Force-Velocity   Urology:  Three  Dimensional  Printing  and  Its  Clinical
               Adaptation  Applied  to  3D-Printed  Prosthetics.  Sci Robot.,   Application. Front Surg 2020;7:729.
               3:eaau5543.                                         https://doi.org/10.3389/fsurg.2020.00029
               https://doi.org/10.1126/scirobotics.aau5543     19.  Cacciamani  GE,  Okhunov  Z,  Meneses  AD,  et al.,  2019,
           5.   Ho CM, Ng SH, Yoon YJ, 2015, A Review on 3D Printed   Impact of Three-Dimensional Printing in Urology: State of
               Bio-Implants. Int J Precis Eng Manuf, 16:1035–46.   the Art  and  Future  Perspectives. A  Systematic  Review  by
           6.   Whulanza Y, Hidayaturrahmi P, Kurniawati T, et al., 2017,   ESUT-YAUWP Group. Eur Urol, 76:209–21.
               Realization  and  Testing  of  Multi-Material  3D  Printer  for      https://doi.org/10.1016/j.eururo.2019.04.044
               Bone Scaffold Fabrication, Depok City, Indonesia, p. 040001.  20.  Sun Z, Liu D, 2018, A Systematic Review of Clinical Value
               https://doi.org/10.1063/1.4976786                   of  Three-Dimensional  Printing  in  Renal  Disease.  Quant
           7.   Abuzairi  T,  Sumantri  NI,  Irfan  A,  et al.,  2021,  Infrared   Imaging Med Surg, 8:311–25.
               Thermometer on the Wall (iThermowall): An Open Source      https://doi.org/10.21037/qims.2018.03.09
               and  3-D  Print  Infrared  Thermometer  for  Fever  Screening.   21.  Redwood  B,  Schöffer  F,  Garret  B,  2017,  The  3D  Printing
               HardwareX, 9:e00168.                                Handbook: Technologies, Design and Applications. 3D Hubs
               https://doi.org/10.1016/j.ohx.2020.e00168           B.V., Netherlands.
           8.   Norman J, Madurawe RD, Moore CM, et al., 2017, A New   22.  Gebhardt A,  Hötter  JS,  2016, Additive  Manufacturing:  3D

                                       International Journal of Bioprinting (2021)–Volume 7, Issue 2        11
   10   11   12   13   14   15   16   17   18   19   20