Page 104 - IJB-8-1

Laser Additive Manufacturing of Zinc
Properties. Mater Des, 155:36–45. 60. Shao B, Wu S, Shan D, et al., 2019, The Effect of Thermal
49. Debroy T, Wei HL, Zuback J, et al., 2018, Additive Cycling Process between High and Low Temperatures on the
manuFACTuring of Metallic Components-Process, Structure Microstructure and Properties of Mg-10Li-3Al-3Zn-0.25SI
and Properties. Progress Mater Sci, 92:112–224. alloy. Mater Lett, 254:167-170.
50. Ebner T, Moser M, Shebl O, et al., 2009, Morphological 61. Wei HL, Cao Y, Liao WH, et al., 2020, Mechanisms on Inter-
Analysis at Compacting Stage is a Valuable Prognostic Tool Track Void Formation and Phase Transformation during Laser
for ICSI Patients. Reprod Biomed Online, 18:61–6. Powder Bed Fusion of Ti-6Al-4V. Addit Manuf, 34:101221.
https://doi.org/10.1016/s1472-6483(10)60425-7 https://doi.org/10.1016/j.addma.2020.101221
51. Liu C, Zhang M, Chen CJ, 2017, Effect of Laser Processing 62. Kh A, Jz A, Fd A, et al., 2021, Particle Distribution and
Parameters on Porosity, Microstructure and Mechanical Microstructure of IN718/WC Composite Coating Fabricated
Properties of Porous Mg-Ca Alloys Produced by Laser by Electromagnetic Compound Field-Assisted Laser
Additive Manufacturing. Mater Sci Eng Struct Mater Cladding. Appl Surf Sci, 545:149078.
Properties Microstruct Process, 703:359–71. 63. Martin AA, Calta NP, Khairallah SA, et al., 2019, Dynamics
https://doi.org/10.1016/j.msea.2017.07.031 of Pore Formation during Laser Powder Bed Fusion Additive
52. Wang MF, Xiao DH, Zhou PF, et al., 2018, Effects of Rare Manufacturing. Nat Commun, 10:1987.
Earth Yttrium on Microstructure and Properties of Mg-Al-Zn 64. Kreitcberg A, Brailovski V, Prokoshkin S, 2018, New
Alloy. J Alloys Compd, 742:232–9. Biocompatible Near-Beta Ti-Zr-Nb Alloy Processed by Laser
https://doi.org/10.1016/j.jallcom.2018.01.234 Powder Bed Fusion: Process Optimization. J Mater Process
53. Wei KW, Gao M, Wang ZM, et al., 2014, Effect of Energy Technol, 252:821–9.
Input on Formability, Microstructure and Mechanical https://doi.org/10.1016/j.jmatprotec.2017.10.052
propErties of Selective Laser Melted AZ91D Magnesium 65. Xu ZF, Liang P, Yang W, et al., 2014, Effects of Laser
Alloy. Mater Sci Eng Struct A Struct Mater Properties Energy Density on Forming Accuracy and Tensile Strength
Microstruct Process, 611:212–22. of Selective Laser Sintering Resin Coated Sands. China
https://doi.org/10.1016/j.msea.2014.05.092 Foundry, 11:151–6.
54. Katayama S, Kobayashi Y, Mizutani M, et al., 2001, Effect 66. Shuai CJ, Yang ML, Deng F, et al., 2020, Forming Quality,
of Vacuum on Penetration and Defects in Laser Welding. Mechanical Properties, and Anti-Inflammatory Activity of
J Laser Appl, 13:187–92. Additive Manufactured Zn-Nd Alloy. J Zhejiang Univ Sci A,
55. Gu D, Shen Y, 2006, Processing and Microstructure of 21:876–91.
Submicron WC-Co Particulate Reinforced Cu Matrix https://doi.org/10.1631/jzus.A2000186
Composites Prepared by Direct Laser Sintering. Mater Sci 67. Wang Q, Lu Y, Zeng X, et al., 1999, Study on the Fluidity of
Eng A, 435:54–61. AZ91+xRE Magnesium Alloy. Mater Sci Eng A, 271:109–15.
56. Yu GQ, Gu DD, Dai DH, et al., 2016, On the Role of 68. Dong L, Correia J, Barth N, et al., 2017, Finite Element
Processing Parameters in Thermal Behavior, Surface Simulations of Temperature Distribution and of Densification
Morphology and Accuracy during Laser 3D Printing of of a Titanium Powder During Metal Laser Sintering. Addit
Aluminum Alloy. J Phys D-Appl Phys, 49:135501. Manuf, 13:37–48.
https://doi.org/10.1088/0022-3727/49/13/135501 69. Foteinopoulos P, Papacharalampopoulos A, Angelopoulos K,
57. Yu GQ, Gu DD, Dai DH, et al., 2016, Influence of Processing et al., 2020, Development of a Simulation Approach for Laser
Parameters on Laser Penetration Depth and Melting/Re- Powder bed Fusion Based on Scanning Strategy Selection.
Melting Densification during Selective Laser Melting of Int J Adv Manuf Technol, 108:3085–100.
Aluminum Alloy. Appl Phys A Mater Sci Process, 122:891. 70. Liu C, Tong J, Jiang M, et al., 2019, Effect of Scanning
https://doi.org/10.1007/s00339-016-0428-6 Strategy on Microstructure and Mechanical Properties
58. Shabahang S, Kaufman JJ, Deng DS, et al., 2011, Observation of Selective Laser Melted Reduced Activation Ferritic/
of the Plateau-Rayleigh Capillary Instability in Multi- Martensitic Steel. Mater Sci Eng A, 766:138364.
Material Optical Fibers. Appl Phys Lett, 99:3. 71. Cheng B, Shrestha S, Chou K, 2016, Stress and Deformation
59. Qiu C, Adkins N, Attallah MM, 2016, Selective Laser Evaluations of Scanning Strategy Effect in Selective Laser
Melting of Invar 36: Microstructure and Properties. Acta Melting. Addit Manuf, 12:240–51.
Mater, 103:382–95. 72. Kabir H, Munir K, Wen C, et al., 2021, Recent Research and

90 International Journal of Bioprinting (2022)–Volume 8, Issue 1