Page 105 - IJB-8-1

Zhou, et al.
Progress of Biodegradable Zinc Alloys and Composites for Modeling of Grain Structure Evolution during Welding of an
Biomedical Applications: Biomechanical and Biocorrosion Aluminum Alloy. Acta Mater, 126:413–25.
Perspectives. Bioact Mater, 6:836–79. 85. de Rosa C, Park C, Thomas EL, et al., 2000, Microdomain
73. Lee H, Lim CH, Low MJ, et al., 2017, Lasers in Additive Patterns from Directional Eutectic Solidification and Epitaxy.
Manufacturing: A Review. Int J Precision Eng Manuf Green Nature, 405:433–7.
Technol, 4:307–22. 86. Zheng W, He Y, Yang J, et al., 2019, Influence of
https://doi.org/10.1007/s40684-017-0037-7 Crystallographic Orientation of Epitaxial Solidification on
74. Chen YZ, Wen P, Voshage M, et al., 2019, Laser Additive the Initial Instability during the Solidification of Welding
Manufacturing of Zn Metal Parts for Biodegradable Implants: Pool. J Manuf Proc, 38:298–307.
Effect of Gas Flow on Evaporation and Formation Quality. 87. Sullivan EM, 2021, Influence of Reaction Synthesis
J Laser Appl, 31:1003. Feedstocks on Solidification Defect Formation and
https://doi.org/10.2351/1.5096118 Microstructure-Property Relationships in Electron Beam
75. Lu FG, Li XB, Li ZG, et al., 2015, Formation and influence Freeform Fabrication of Aluminum Metal Matrix Composites.
mechanism of keyhole-induced porosity in deep-penetration Illinois: Colorado School of Mines.
laser welding based on 3D transient modeling. Int J Heat 88. Zhu YY, Tang HB, Li Z, et al., 2019, Solidification Behavior
Mass Transfer, 90:1143–52. and Grain Morphology of Laser Additive Manufacturing
https://doi.org/10.1016/j.ijheatmasstransfer.2015.07.041 Titanium Alloys. J Alloys Compd, 777:712–6.
76. Young ZA, Guo Q, Parab ND, et al., 2020, Types of Spatter 89. Wang X, Zhang C, Cui X, et al., 2021, Novel Gradient
and their Features and Formation Mechanisms in Laser Alloy Steel with Quasi-Continuous Ratios Fabricated by
Powder Bed Fusion Additive Manufacturing Process. Addit SLM: Material Microstructure and Wear Mechanism. Mater
Manuf, 36:101438. Charact, 174:111020.
https://doi.org/10.1016/j.addma.2020.101438 90. Rappaz M, David SA, Vitek JM, et al., 1989, Development
77. Wen P, Qin Y, Chen Y, et al., 2019, Laser Additive of Microstructures in Fe15Ni15Cr Single Crystal Electron
Manufacturing of Zn Porous Scaffolds: Shielding Gas Flow, Beam Welds. Metall Trans A, 20:1125–38.
Surface Quality and Densification. J Mater Sci Technol, 91. Soler R, Evirgen A, Yao M, et al., 2018, Microstructural and
35:368–76. Mechanical Characterization of an Equiatomic YGdTbDyHo
78. Jauer L, Jülich B, Voshage M, et al., 2015, Selective Laser High Entropy Alloy with Hexagonal Close-Packed Structure.
Melting of Magnesium Alloys. Acta Mater, 156:86–96.
79. Yang Y, Yang M, He C, et al., 2021, Rare Earth Improves 92. Paidar V, Capek J, Ostapovets A, 2018, Secondary Twinning
Strength and Creep Resistance of Additively Manufactured in Zinc. Philos Mag Lett, 98:437–45.
Zn Implants. Compos B Eng, 216:108882. https://doi.org/10.1080/09500839.2019.1566799
https://doi.org/10.1016/j.compositesb.2021.108882 93. Li Y, Shi J, Jahr H, et al., 2021, Improving the Mechanical
80. Elmer JW, Allen S M, Eagar TW, 1989, Microstructural Properties of Additively Manufactured Micro-Architected
Development during Solidification of Stainless Steel Alloys. Biodegradable Metals. JOM J Miner Metals Mater Soc,
Metall Trans A, 20:2117–31. 73:1–11.
81. Shuai C, Xue L, Gao C, et al., 2018, Selective Laser 94. Liu S, Yang W, Shi X, et al., 2019, Influence of Laser
Melting of Zn-Ag Alloys for Bone Repair: Microstructure, Process Parameters on the Densification, Microstructure,
Mechanical Properties and Degradation Behaviour. Virtual and Mechanical Properties of a Selective Laser Melted AZ61
Phys Prototyp, 13:146–54. Magnesium Alloy. J Alloys Compd, 808:151160.
82. Qin Y, Wen P, Xia D, et al., 2020, Effect of Grain Structure on 95. Auer S, Frenkel D, 2001, Suppression of Crystal Nucleation
the Mechanical Properties and In Vitro Corrosion Behavior of in Polydisperse Colloids due to Increase of the Surface Free
Additively Manufactured Pure Zn. Addit Manuf, 33:101134. Energy. Nature, 413:711–3.
https://doi.org/10.1016/j.addma.2020.101134 96. Wei K, Gao M, Zemin W, et al., 2014, Effect of Energy Input
83. Gandin R, 1993, Probabilistic modelling of microstructure on Formability, Microstructure and Mechanical Properties of
formation in solidification processes. Acta Metall Mater, Selective Laser Melted AZ91D Magnesium Alloy. Mater Sci Eng
41:345–60. A Struct Mater Properties Misrostruct Process, 611:212–22.
84. Wei HL, Elmer JW, de Broy T, 2017, Three-Dimensional 97. Azizand MJ, 1982, Model for Solute Redistribution during

International Journal of Bioprinting (2022)–Volume 8, Issue 1 91