Page 467 - v11i4
P. 467

International Journal of Bioprinting                          Tunable GelMA-based bioinks for keloid modeling




            Investigation: Laurensia Danis Anggradita, Seung Min      doi: 10.1186/s40580-023-00402-5
               Nam, Yongsung Hwang                             6.   Nath R, Thomas J, Janardanan A,  et al. An insight into
            Methodology: Laurensia Danis Anggradita, Seung Min    synthesis, properties and applications of gelatin methacryloyl
               Nam, Yongsung Hwang                                hydrogel for 3D bioprinting. Mater Adv. 2023;22:5496-5529.
            Project administration: Seung Min Nam, Yongsung Hwang     doi: 10.1039/D3MA00715D
            Writing – original draft: Laurensia Danis Anggradita,   7.   Wu Y, Xiang Y, Fang J, et al. The influence of the stiffness of
               Murugaiyan Manimohan, Sung Sik Hur,                GelMA substrate on the outgrowth of PC12 cells. Biosci Rep.
            Seung Min Nam, Yongsung Hwang                         2019;39(1):BSR20181748.
            Writing – review & editing: Laurensia Danis Anggradita,      doi: 10.1042/BSR20181748
               Murugaiyan Manimohan,                           8.   Piao Y, You H, Xu T, et al. Biomedical applications of gelatin
            Seung Min Nam, Yongsung Hwang                         methacryloyl hydrogels. Eng Regen. 2021;2:47-56.
            All authors have read and agreed to the published version   doi: 10.1016/j.engreg.2021.03.002
               of the manuscript.
                                                               9.   Axpe E, Oyen ML. Applications of alginate-based bioinks in
                                                                  3D bioprinting. Int J Mol Sci. 2016;17(12):1976.
            Ethics approval and consent to participate            doi: 10.3390/ijms17121976
            The study was conducted according to the guidelines of the   10.  Aldana AA, Valente F, Dilley R, Doyle B. Development of
            Declaration of Helsinki and approved by the Institutional   3D bioprinted GelMA-alginate hydrogels with tunable
            Review Board of Soonchunhyang University Bucheon      mechanical properties. Bioprinting. 2021;21:e00105.
            Hospital (SCHBC_IRB_2017-08-010). Informed consent    doi: 10.1016/j.bprint.2020.e00105
            was obtained from all individual participants included in   11.  Contessi N, Altomare L, Filipponi A, Farè S. Thermo-
            the study.                                            responsive properties of methylcellulose hydrogels for cell
                                                                  sheet engineering. Mater Lett. 2017;207:157-160.
            Consent for publication                               doi: 10.1016/j.matlet.2017.07.023

            Not applicable.                                    12.  Chang C, Zhang L. Cellulose-based hydrogels: present
                                                                  status and application prospects.  Carbohydr Polym.
            Availability of data                                  2011;84(1):40-53.
                                                                  doi: 10.1016/j.carbpol.2010.12.023
            The data that support the findings of this study are available   13.  Contessi Negrini N, Bonetti L, Contili L, Farè S. 3D
            from the corresponding author upon reasonable request.  printing of methylcellulose-based hydrogels.  Bioprinting.
                                                                  2018;10:e00024.
            References                                            doi: 10.1016/j.bprint.2018.e00024

            1.   Gu BK, Choi DJ, Park SJ, Kim MS, Kang CM,  Kim   14.  Ma Z, He H, Deng C, et al. 3D bioprinting of proangiogenic
               C-H. 3-Dimensional bioprinting for tissue engineering   constructs  with  induced  immunomodulatory
               applications. Biomater Res. 2016;20(1):12.         microenvironments through a dual cross-linking procedure
               doi: 10.1186/s40824-016-0058-2                     using laponite incorporated bioink.  Compos  B Eng.
                                                                  2022;229:109399.
            2.   Choi K, Park CY, Choi JS, et al. The effect of the mechanical   doi: 10.1016/j.compositesb.2021.109399
               properties of the 3D printed gelatin/hyaluronic acid scaffolds
               on hMSCs differentiation towards chondrogenesis.  Tissue   15.  Choi D, Heo J, Aviles Milan J, et al. Structured nanofilms
               Eng Regen Med. 2023;20(4):593-605.                 comprising Laponite® and bone extracellular matrix for
               doi: 10.1007/s13770-023-00545-w                    osteogenic differentiation of skeletal progenitor cells. Mater
                                                                  Sci Eng C Mater Biol Appl. 2021;118:111440.
            3.   Rossi A, Pescara T, Gambelli AM,  et al. Biomaterials for      doi: 10.1016/j.msec.2020.111440
               extrusion-based bioprinting and biomedical applications.
               Front Bioeng Biotechnol. 2024;12:1393641.       16.  Li C, Hou Y, He M, et al. Laponite lights calcium flickers
               doi: 10.3389/fbioe.2024.1393641                    by reprogramming lysosomes to steer DC migration for an
                                                                  effective antiviral CD8(+) T-cell response. Adv Sci (Weinh).
            4.   Chen XB, Fazel Anvari-Yazdi A, Duan X, et al. Biomaterials/  2023;10(30):e230300.
               bioinks and extrusion bioprinting.  Bioact Mater.      doi: 10.1002/advs.202303006.
               2023;28:511-536.                                17.  Wang Y, Zhao T, Jiao Y,  et al. Silicate nanoplatelets
               doi: 10.1016/j.bioactmat.2023.06.006
                                                                  promotes  neuronal  differentiation  of  neural  stem  cells
            5.   Yoon J, Han H, Jang J. Nanomaterials-incorporated   and restoration of spinal cord injury.  Adv  Healthc  Mater.
               hydrogels for 3D bioprinting technology.  Nano Converg.   2023;12(19):e2203051.
               2023;10(1):52.                                     doi: 10.1002/adhm.202203051.


            Volume 11 Issue 4 (2025)                       459                            doi: 10.36922/IJB025160154
   462   463   464   465   466   467   468   469   470   471   472