Page 82 - MSAM-1-4

Materials Science in Additive Manufacturing Survey of AM reviews

seven AM techniques are given (i.e., material extrusion, References
powder bed fusion, material jetting, binder jetting, 1. Gibson I, Rosen DW, Stucker B, et al., 2021, Additive
directed energy deposition, vat photopolymerization, Manufacturing Technologies. 3 ed. Berlin: Springer.
rd
and sheet lamination). As can be seen, most of the review
papers are in the categories of powder bed fusion and 2. International Organization for Standardization/ASTM52900,
directed energy deposition. No review papers in sheet 2021, Additive manufacturing-General principles-
lamination were found. In the future, it is necessary to Terminology. West Conshohocken, PA: ASTM International.
carry out a review on sheet lamination, although it is 3. Jiang J, Xu X, Stringer J, 2019, Optimization of process
not a famous AM technique. In addition, typical review planning for reducing material waste in extrusion based
papers are categorized into different groups based on the additive manufacturing, robot. Comput Integr Manuf,
materials these review papers focused on (e.g., metal, 59: 317–325.
ceramic, polymer, biomaterial, concrete, fiber, food, https://doi.org/10.1016/j.rcim.2019.05.007
smart material, glass, and wood). The specific objectives 4. Kabir SM, Mathur K, Seyam AF, 2020, A critical review on
of each review paper are listed, as shown in Table 4. For 3D printed continuous fiber-reinforced composites: History,
example, He et al. [134] focuses on SiC ceramic in AM, and mechanism, materials and properties. Compos Struct,
readers can refer accordingly based on their interests. The 232: 111476.
aim of this survey paper is to provide a guidance to the https://doi.org/10.1016/J.COMPSTRUCT.2019.111476
development of AM review papers, give a comprehensive
analysis on the current available review papers in this 5. Zhuo P, Li S, Ashcroft IA, et al., 2021, Material extrusion
field, and hopefully, provide some insights and inspire additive manufacturing of continuous fibre reinforced
more ideas. As the review papers published in AM are polymer matrix composites: A review and outlook, Compos
increasing; nowadays, the selected review papers in this Part B Eng, 224: 109143.
survey are based on the Scopus database, which might https://doi.org/10.1016/J.COMPOSITESB.2021.109143
have some limitations. In addition, this survey only 6. Goh GD, Neo SJ, Dikshit V, et al., 2021, Quasi-static
considers the most cited papers in each category based indentation and sound-absorbing properties of 3D printed
on the number of citations, while the published time of sandwich core panels. 24: 1206–1225.
the review papers is not considered.
https://doi.org/10.1177/10996362211037015
Acknowledgments 7. Stratasys, 2017, United States: Stratasys. Avaialble from:
https://www.investors.stratasys.com/news-events/press-
None. releases/detail/418/inventor-of-fdm-3d-printing-and-co-
Funding founder-of-stratasys [Last accessed on 2018 Dec 09].
8. Jiang J, Xu X, Stringer J, 2019, Effect of Extrusion
The authors would like to acknowledge the fundings Temperature on Printable Threshold Overhang in Additive
from the Provincial Natural Science Foundation of Anhui Manufacturing. In: 52 CIRP Conference on Manufacturing
nd
(2208085QA01) and the Fundamental Research Funds for Systems, Ljubljana.
the Central Universities (WK0010000075).
9. Jiang J, Xu X, Stringer J, 2018, Support structures for additive
Conflict of interest manufacturing: A review. J Manuf Mater Process, 2: 64.
https://doi.org/10.3390/jmmp2040064
None.
10. Thompson SM, Bian L, Shamsaei N, et al., 2015, An overview
Author contributions of direct laser deposition for additive manufacturing; Part I:
Transport phenomena, modeling and diagnostics. Addit
Conceptualization: Jingchao Jiang Manuf, 8: 36–62.
Data curation: Liuchao Jin
Formal analysis: Jingchao Jiang https://doi.org/10.1016/J.ADDMA.2015.07.001
Funding acquisition: Xiaoya Zhai 11. Beaman JJ, Deckard CR, 1991, Selective Laser Sintering with
Investigation: Xiaoya Zhai Assisted Powder Handling. Available from: https://www.
Methodology: Jingchao Jiang patents.google.com/patent/US4938816A/en [Last accessed
Project administration: Xiaoya Zhai on 2018 Dec 09].
Resources: Xiaoya Zhai 12. Bertrand P, Bayle F, Combe C, et al., 2007, Ceramic
Writing – original draft: Xiaoya Zhai, Liuchao Jin components manufacturing by selective laser sintering. Appl
Writing – review & editing: Jingchao Jiang Surf Sci, 254: 989–992.

Volume 1 Issue 4 (2022) 13 https://doi.org/10.18063/msam.v1i4.21