Page 85 - MSAM-1-4

Materials Science in Additive Manufacturing Survey of AM reviews

high resolution 3D Printing of shape-conformable batteries https://doi.org/10.1016/J.ADDMA.2018.01.002
via vat photopolymerization: Review and perspective. IEEE 72. Chaunier L, Guessasma S, Belhabib S, et al., 2018, Material
Access, 9: 140654–140666.
extrusion of plant biopolymers: Opportunities and
https://doi.org/10.1109/ACCESS.2021.3119533 challenges for 3D printing. Addit Manuf, 21: 220–233.
61. Shaukat U, Rossegger E, Schlögl S, 2022, A review of https://doi.org/10.1016/J.ADDMA.2018.03.016
multi-material 3D Printing of functional materials via vat 73. Huang J, Chen Q, Jiang H, et al., 2020, A survey of design
photopolymerization. Polymers, 14: 2449. methods for material extrusion polymer 3D printing.
https://doi.org/10.3390/POLYM14122449 Virtual Phys Prototyp, 15: 148–162.
62. Bartlett JL, Li X, 2019, An overview of residual stresses in https://doi.org/10.1080/17452759.2019.1708027
metal powder bed fusion. Addit Manuf, 27 (2019) 131–149. 74. Lamm ME, Wang L, Kishore V, et al., 2020, Material extrusion
https://doi.org/10.1016/J.ADDMA.2019.02.020 additive manufacturing of wood and lignocellulosic filled
composites. Polymers (Basel), 12: 2115.
63. Chatham CA, Long TE, Williams CB, A review of the process
physics and material screening methods for polymer powder https://doi.org/10.3390/POLYM12092115
bed fusion additive manufacturing. Prog Polym Sci, 93: 68–95. 75. Oleff A, Küster B, Stonis M, et al., 2021, Process monitoring
https://doi.org/10.1016/J.PROGPOLYMSCI.2019.03.003 for material extrusion additive manufacturing: A state-of-
the-art review. Prog Addit Manuf, 64: 705–730.
64. Aversa A, Marchese G, Saboori A, et al., 2019, New
Aluminum alloys specifically designed for laser powder bed https://doi.org/10.1007/S40964-021-00192-4
fusion: A review. Materials (Basel), 12: 1007. 76. Rowat SJ, Legge RL, Moresoli C, 2021, Plant protein in
https://doi.org/10.3390/MA12071007 material extrusion 3D printing: Formation, plasticization,
prospects, and challenges. J Food Eng, 308: 110623.
65. Dowling L, Kennedy J, O’Shaughnessy S, et al., 2020, A
review of critical repeatability and reproducibility issues in https://doi.org/10.1016/J.JFOODENG.2021.110623
powder bed fusion. Mater Des, 186: 108346. 77. Saboori A, Aversa A, Marchese G, et al., 2019, Application of
https://doi.org/10.1016/J.MATDES.2019.108346 directed energy deposition-based additive manufacturing in
repair. Appl Sci, 9: 3316.
66. Snow Z, Nassar AR, Reutzel EW, 2020, Invited review article:
Review of the formation and impact of flaws in powder bed https://doi.org/10.3390/APP9163316
fusion additive manufacturing. Addit Manuf, 36: 101457. 78. Tang ZJ, Liu WW, Wang YW, et al., 2020, A review on in
https://doi.org/10.1016/J.ADDMA.2020.101457 situ monitoring technology for directed energy deposition
of metals. Int J Adv Manuf Technol, 108: 3437–3463.
67. Awad A, Fina F, Goyanes A, et al., 2021, Advances in powder
bed fusion 3D printing in drug delivery and healthcare. Adv https://doi.org/10.1007/S00170-020-05569-3
Drug Deliv Rev, 174: 406–424. 79. Xu J, Gu X, Ding D, et al., 2018, A review of slicing

https://doi.org/10.1016/J.ADDR.2021.04.025 methods for directed energy deposition based additive
manufacturing. Rapid Prototyp J, 24: 1012–1025.
68. Mirzababaei S, Pasebani S, 2019, A review on binder jet
additive manufacturing of 316L stainless steel. J Manuf https://doi.org/10.1108/RPJ-10-2017-0196/FULL/PDF
Mater Process, 3: 82. 80. Wang H, Liu W, Tang Z, et al., 2020, Review on adaptive
https://doi.org/10.3390/JMMP3030082 control of laser-directed energy deposition. Optic Eng,
59: 070901.
69. Goh GD, Yap YL, Tan HK, et al., 2019, Process-structure-
properties in polymer additive manufacturing via material https://doi.org/10.1117/1.OE.59.7.070901
extrusion: A review. Crit Rev Solid State Mater Sci, 45: 113–133. 81. Kim KH, Jung CH, Jeong DY, et al., 2021, Preventing
https://doi.org/10.1080/10408436.2018.1549977 evaporation products for high-quality metal film in directed
energy deposition: A review. Metals, 11: 353.
70. Spoerk M, Holzer C, Gonzalez-Gutierrez J, 2020, Material
extrusion-based additive manufacturing of polypropylene: https://doi.org/10.3390/MET11020353
A review on how to improve dimensional inaccuracy and 82. Singh N, Hameed P, Ummethala R, et al., 2020, Selective
warpage. J Appl Polym Sci, 137: 48545. laser manufacturing of Ti-based alloys and composites:
https://doi.org/10.1002/APP.48545 Impact of process parameters, application trends, and future
prospects. Mater Today Adv, 8: 100097.
71. Brenken B, Barocio E, Favaloro A, et al., 2018, Fused
filament fabrication of fiber-reinforced polymers: A review. https://doi.org/10.1016/J.MTADV.2020.100097
Addit Manuf, 21: 1–16. 83. Teixeira O, Silva FJ, Ferreira LP, et al., A review of heat

Volume 1 Issue 4 (2022) 16 https://doi.org/10.18063/msam.v1i4.21