Page 90 - MSAM-1-4

Materials Science in Additive Manufacturing Survey of AM reviews

On-demand additive manufacturing of functionally graded focused perspective. Addit Manuf, 27: 363–371.
concrete. Virtual Phys Prototyp, 15: 194–210.
https://doi.org/10.1016/J.ADDMA.2019.03.030
https://doi.org/10.1080/17452759.2019.1709009
187. Chen X, Chen G, Wang G, et al., Recent progress on
176. van de Werken N, Tekinalp H, Khanbolouki P, et al., 2020, 3D-printed polylactic acid and its applications in bone
Additively manufactured carbon fiber-reinforced composites: repair. Adv Eng Mater, 22: 1901065.
State of the art and perspective. Addit Manuf, 31: 100962.
https://doi.org/10.1002/ADEM.201901065.
https://doi.org/10.1016/J.ADDMA.2019.100962
188. Mehrpouya M, Vahabi H, Janbaz S, et al., 2021, 4D printing
177. Li M, Pu Y, Thomas VM, et al., 2020, Recent advancements of shape memory polylactic acid (PLA). Polymer (Guildf),
of plant-based natural fiber–reinforced composites and their 230: 124080.
applications. Compos Part B Eng, 200: 108254.
https://doi.org/10.1016/J.POLYMER.2021.124080
https://doi.org/10.1016/J.COMPOSITESB.2020.108254
189. Cojocaru V, Frunzaverde V, Miclosina CO, et al., 2022,
178. Shanmugam V, Rajendran DJ, Babu K, et al., 2021, The influence of the process parameters on the mechanical
The mechanical testing and performance analysis of properties of PLA specimens produced by fused filament
polymer-fibre composites prepared through the additive fabrication— A review. Polymers, 14: 886.
manufacturing. Polym Test, 93: 106925.
https://doi.org/10.3390/POLYM14050886
https://doi.org/10.1016/J.POLYMERTESTING.2020.106925
190. El Magri A, Vanaei S, Vaudreuil S, 2021, An overview on the
179. Ferreira I, Machado M, Alves F, et al., 2019, A review on influence of process parameters through the characteristic of
fibre reinforced composite printing via FFF. Rapid Prototyp 3D-printed PEEK and PEI parts. High Performance Polym,
J, 25: 972–988. 33: 862–880.
https://doi.org/10.1108/RPJ-01-2019-0004/FULL/PDF https://doi.org/10.1177/09540083211009961
180. Ramesh M, Rajeshkumar L, Balaji D, 2021, Influence 191. Dua R, Rashad Z, Spears J, et al., Applications of 3D-printed
of process parameters on the properties of additively PEEK via fused filament fabrication: A systematic review.
manufactured fiber-reinforced polymer composite Polymers, 13: 4046.
Materials: A review. J Mater Eng Perform, 30: 4792–4807.
https://doi.org/10.3390/POLYM13224046
https://doi.org/10.1007/S11665-021-05832-Y/FIGURES/10
192. Ding Y, Muñiz-Lerma JA, Trask M, et al., 2016,
181. Goh GL, Zhang H, Chong TH, et al., 2021, 3D Printing of Microstructure and mechanical property considerations
multilayered and multimaterial electronics: A review. Adv in additive manufacturing of aluminum alloys. MRS Bull,
Electron Mater, 7: 2100445. 41: 745–751.
https://doi.org/10.1002/AELM.202100445 https://doi.org/10.1557/MRS.2016.214
182. Mehrpouya M, Tuma D, Vaneker T, et al., 2022, Multimaterial 193. Ponnusamy P, Rashid RA, Masood SH, et al., 2020,
powder bed fusion techniques. Rapid Prototyp J, 28: 1–19. Mechanical properties of SLM-printed aluminium alloys:
A review. Materials, 13: 4301.
https://doi.org/10.1108/RPJ-01-2022-0014/FULL/PDF.
https://doi.org/10.3390/MA13194301
183. Rocha VG, Saiz E, Tirichenko IS, et al., 2020, Direct
ink writing advances in multi-material structures for a 194. Fiocchi J, Tuissi A, Biffi CA, 2021, Heat treatment of
sustainable future. J Mater Chem A, 8: 15646–15657. aluminium alloys produced by laser powder bed fusion:
A review. Mater Des, 204: 109651.
https://doi.org/10.1039/D0TA04181E
https://doi.org/10.1016/J.MATDES.2021.109651
184. Pajonk A, Prieto A, Blum U, et al., Multi-material additive
manufacturing in architecture and construction: A review. 195. Thapliyal S, 2019, Challenges associated with the wire arc
J Build Eng, 45: 103603. additive manufacturing (WAAM) of aluminum alloys.
Mater Res Express, 6: 112006.
https://doi.org/10.1016/J.JOBE.2021.103603
https://doi.org/10.1088/2053-1591/AB4DD4
185. García-Collado A, Blanco JM, Gupta MK, et al., 2022,
Advances in polymers based multi-material additive- 196. Revilla RI, Verkens D, Rubben T, et al., 2020, Corrosion and
manufacturing techniques: State-of-art review on properties corrosion protection of additively manufactured aluminium
and applications. Addit Manuf, 50: 102577. alloys-a critical review. Materilas, 13: 4804.
https://doi.org/10.1016/J.ADDMA.2021.102577 https://doi.org/10.3390/MA13214804
186. Peterson AM, 2019, Review of acrylonitrile butadiene 197. Jiang Q, Zhang P, Yu Z, et al., 2021, A review on additive
styrene in fused filament fabrication: A plastics engineering- manufacturing of pure copper. Coatings, 11: 740.

Volume 1 Issue 4 (2022) 21 https://doi.org/10.18063/msam.v1i4.21