Page 136 - MSAM-2-3

Materials Science in Additive Manufacturing Powder alteration caused by L-PBF process

Review on characterization and impacts of the lattice Characterization of AISI 304L stainless steel powder
structure in additive manufacturing. Mater Today Proc, recycled in the laser powder-bed fusion process. Addit
21: 916–919. Manuf, 32: 100981.
https://doi.org/10.1016/j.matpr.2019.08.158 24. Lutter-Günther M, Gebbe C, Kamps T, et al., 2018, Powder
13. Del Re F, Contaldi V, Astarita A, et al., 2018, Statistical recycling in laser beam melting: Strategies, consumption
approach for assessing the effect of powder reuse on the modeling and influence on resource efficiency. Prod Eng,
final quality of AlSi10Mg parts produced by laser powder 12: 377–389.
bed fusion additive manufacturing. Int J Adv Manuf Technol, https://doi.org/10.1007/s11740-018-0790-7
97: 2231–2240.
25. Carrion PE, Soltani-Tehrani A, Phan N, et al., 2018, Powder
https://doi.org/10.1007/s00170-018-2090-y recycling effects on the tensile and fatigue behavior of
14. Anwar AB, Pham QC, 2016, Effect of Inert Gas Flow additively manufactured Ti-6Al-4V parts. JOM, 71: 963–973.
Velocity and Unidirectional. Canning on the Formation and https://doi.org/10.1007/s11837-018-3248-7
Accumulation of Spattered Powder During Selective Laser
Melting. In: Proceedings of the 2 International Conference 26. Quintana OA, Alvarez J, McMillan R, et al., 2018, Effects
nd
on Progress in Additive Manufacturing (Pro-AM 2016). of reusing Ti-6Al-4V powder in a selective laser melting
additive system operated in an industrial setting. JOM,
15. Szost B, Wang X, Johns D, et al., 2018, Spatter and oxide 70: 1863–1869.
formation in laser powder bed fusion of Inconel 718. Addit
Manuf, 24: 446–456. https://doi.org/10.1007/s11837-018-3011-0
16. Popov VV Jr., Katz-Demyanetz A, Garkun A, et al., 2018, 27. Liu B, Wildman R, Tuck C, et al., 2011, Investigation the
The effect of powder recycling on the mechanical properties Effect of Particle Size Distribution on Processing Parameters
and microstructure of electron beam melted Ti-6Al-4V Optimisation in Selective Laser Melting Process. United
specimens. Addit Manuf, 22: 834–843. States: University of Texas at Austin.
https://doi.org/10.1016/j.addma.2018.06.003 28. Pal S, Gubeljak N, Bončina T, et al., 2021, The effects of
locations on the build tray on the quality of specimens
17. Renishaw Plc., 2016, Investigating the Effects of Multiple in powder bed additive manufacturing. Int J Adv Manuf
Re-use of Ti6Al4V Powder in Additive Manufacturing. Technol, 112: 1159–1170.
United Kingdom: Renishaw Plc. p1–10.
https://doi.org/10.1007/s00170-020-06563-5
18. Rock C, Ledford C, Garcia-Avila M, et al., 2021, The influence
of powder reuse on the properties of nickel super alloy ATI 29. Brika SE, Letenneur M, Dion CA, et al., 2020, Influence of
718 in laser powder bed fusion additive manufacturing. particle morphology and size distribution on the powder
™
Metallurgical Mater Trans B, 52: 676–688. flowability and laser powder bed fusion manufacturability
of Ti-6Al-4V alloy. Addit Manuf, 31: 100929.
https://doi.org/10.1007/s11663-020-02040-2
30. Zhang X, Xiao Z, Yu W, et al., 2022, Influence of erbium
19. Powell D, Rennie AEW, Geekie L, et al., 2020, Understanding addition on the defects of selective laser-melted 7075
powder degradation in metal additive manufacturing to aluminium alloy. Virtual Phys Prototyp, 17: 406–418.
allow the upcycling of recycled powders. J Clean Prod,
268: 122077. 31. Sun H, Chu X, Liu Z, et al., 2021, Selective laser melting of
maraging steels using recycled powders: A comprehensive
https://doi./org/10.1016/j.jclepro.2020.122077 microstructural and mechanical investigation. Metallurgical
20. Soundarapandiyan G, Johnston C, Khan RHU, et al., 2021, Mater Trans A, 52: 1714–1722.
A technical review of the challenges of powder recycling in https://doi.org/10.1007/s11661-021-06180-1
the laser powder bed fusion additive manufacturing process.
J Eng, 2021: 97–103. 32. Asgari H, Baxter C, Hosseinkhani K, et al., 2017, On
microstructure and mechanical properties of additively
https://doi.org/10.1049/tje2.12013 manufactured AlSi10Mg_200C using recycled powder.
21. Tang HP, Qian M, Liu N, et al., 2015, Effect of powder reuse Mater Sci Eng A, 707: 148–158.
times on additive manufacturing of Ti-6Al-4V by selective https://doi.org/10.1016/j.msea.2017.09.041
electron beam melting. JOM, 67: 555–563.
33. Soltani-Tehrani A, Pegues J, Shamsaei N, 2020, Fatigue
https://doi.org/10.1007/s11837-015-1300-4
behavior of additively manufactured 17-4 PH stainless steel:
22. O’Leary R, Setchi R, Prickett P, et al., 2016, An investigation The effects of part location and powder re-use. Addit Manuf,
into the recycling of Ti-6Al-4V powder used within SLM to 36: 101398.
improve sustainability. J Innov Impact, 8: 377.
34. Contaldi V, Del Re F, Palumbo B, et al., 2019, Mechanical
23. Sutton AT, Kriewall CS, Karnati S, et al., 2020, characterisation of stainless steel parts produced by direct

Volume 2 Issue 3 (2023) 13 https://doi.org/10.36922/msam.1781