Page 137 - MSAM-2-3

Materials Science in Additive Manufacturing Powder alteration caused by L-PBF process

metal laser sintering with virgin and reused powder. Int J 39. Seyda V, Kaufmann N, Emmelmann C, 2012, Investigation
Adv Manuf Technol, 105: 3337–3351. of aging processes of Ti-6Al-4 V powder material in laser
melting. Phys Procedia, 39: 425–431.
https://doi.org/10.1007/s00170-019-04416-4
https://doi.org/10.1016/j.phpro.2012.10.057
35. Ahmed F, Ali U, Sarker D, et al., 2020, Study of powder
recycling and its effect on printed parts during laser powder- 40. Yi F, Zhou Q, Wang C, et al., 2021, Effect of powder reuse on
bed fusion of 17-4 PH stainless steel. J Mater Process Technol, powder characteristics and properties of Inconel 718 parts
278: 116522. produced by selective laser melting. J Mater Res Technol,
13: 524–533.
https://doi.org/10.1016/j.jmatprotec.2019.116522
https://doi.org/10.1016/j.jmrt.2021.04.091
36. Rayan O, Brousseau J, Belzile C, et al., 2023, Maraging steel
powder recycling effect on the tensile and fatigue behavior 41. Mohd Yusuf S, Choo E, Gao N, 2020, Comparison between
of parts produced through the laser powder bed fusion virgin and recycled 316L SS and AlSi10Mg powders used
(L-PBF) process. Int J Adv Manuf Technol, 127: 1737–1754. for laser powder bed fusion additive manufacturing. Metals,
10: 1625.
https://doi.org/10.1007/s00170-023-11522-x.
42. Soundarapandiyan G, Johnston C, Khan RH, et al., 2021, A
37. Systems EG-EO, 2017, EOS MaragingSteel MS1 DATA technical review of the challenges of powder recycling in the
SHEET. p1–5. laser powder bed fusion additive manufacturing process.
38. Ardila LC, Garciandia F, González-Díaz JB, et al., 2014, J Eng, 2021: 97–103.
Effect of IN718 recycled powder reuse on properties of parts 43. Shanbhag G, Vlasea M, 2020, The effect of reuse cycles on
manufactured by means of selective laser melting. Phys Ti-6Al-4V powder properties processed by electron beam
Procedia, 56: 99–107. powder bed fusion. Manuf Lett, 25: 60–63.
https://doi.org/10.1016/j.phpro.2014.08.152 https://doi.org/10.1016/j.mfglet.2020.07.007

Volume 2 Issue 3 (2023) 14 https://doi.org/10.36922/msam.1781