Page 75 - MSAM-2-4

Materials Science in Additive Manufacturing Base shape generation for HAM

Acknowledgments Ind, 13: 89–96.

The authors would like to express their appreciation for the https://doi.org/10.1051/meca/2012003
support provided by Hongjian Wu from UTBM. 6. Le VT, Paris H, Mandil G, 2017, Process planning for
combined additive and subtractive manufacturing
Funding technologies in a remanufacturing context. J Manuf Syst,
None. 44: 243–254.
https://doi.org/10.1016/j.jmsy.2017.06.003
Conflict of interest
7. Ramaswami K, 1997, Process Planning for Shape Deposition
The authors declare no conflicts of interest. Manufacturing. [Doctoral dissertation]. Stanford, CA:
Stanford University.
Author contributions
8. Flynn JM, Shokrani A, Newman ST, et al., 2016, Hybrid
Conceptualization: Yicha Zhang, Zhen Hong, Zhiping additive and subtractive machine tools-research and
Wang industrial developments. Int J Mach Tools Manuf,
Formal analysis: Zhiping Wang, Zhen Hong 101: 79–101.
Funding acquisition: Alain Bernard https://doi.org/10.1016/j.ijmachtools.2015.11.007
Investigation: Sihao Deng 9. Zhu Z, Dhokia VG, Nassehi A, et al., 2013, A review of
Methodology: Zhiping Wang, Zhen Hong hybrid manufacturing processes -state of the art and future
Writing – original draft: Zhen Hong, Zhiping Wang perspectives. Int J Comput Integr Manuf, 26: 596–615.
Writing – review & editing: Yicha Zhang, Alain Bernard https://doi.org/10.1080/0951192x.2012.749530
Ethics approval and consent to participate
10. Sealy MP, Madireddy G, Williams RE, et al., 2018, Hybrid
Not applicable. processes in additive manufacturing. J Manuf Sci Eng,
140: 060801.
Consent for publication
https://doi.org/10.1115/1.4038644
Not applicable.
11. Kickelbick G, 2006, Introduction to hybrid materials.
Availability of data In: Hybrid Materials: Synthesis, Characterization, and
Applications. Hoboken: Wiley.
Raw data are available from the corresponding author on 12. Lauwers B, Klocke F, Klink A, et al., 2014, Hybrid processes
reasonable request. in manufacturing. CIRP Ann, 63: 561–583.

References https://doi.org/10.1016/j.cirp.2014.05.003
1. Wohlers TT, Wohlers Associates, Campbell I, et al., 13. Nassehi, A., Newman, S., Dhokia, V, et al., 2011, Using
2020, Wohlers Report 2020: 3D Printing and Additive formal methods to model hybrid manufacturing processes.
Manufacturing State of the Industry. United States: Wohlers In: Enabling Manufacturing Competitiveness and Economic
Associates. Sustainability. Berlin, Heidelberg: Springer.
2. Zhang Y, Wang Z, Zhang Y, et al., 2020, Bio-inspired 14. Ham I, Lu SC, 1988, Computer-aided process planning: The
generative design for support structure generation and present and the future. CIRP Ann, 37: 591–601.
optimization in additive manufacturing (AM). CIRP Ann, https://doi.org/10.1016/s0007-8506(07)60756-2
69: 117–120.
15. Zhang Y, Bernard A, 2018, A KBE CAPP framework for
https://doi.org/10.1016/j.cirp.2020.04.091
qualified additive manufacturing. CIRP Ann, 67: 467–470.
3. Esmaeilian B, Behdad S, Wang B, 2016, The evolution and https://doi.org/10.1016/j.cirp.2018.04.045
future of manufacturing: A review. J Manuf Syst, 39: 79–100.
16. Kulkarni P, Marsan A, Dutta D, 2000, A review of process
https://doi.org/10.1016/j.jmsy.2016.03.001 planning techniques in layered manufacturing. Rapid
4. Gao W, Zhang Y, Ramanujan D, et al., 2015, The status, Prototyp J, 6: 18–35.
challenges, and future of additive manufacturing in https://doi.org/10.1108/13552540010309859
engineering. Comput Aided Des, 69: 65–89.
17. Zhang Y, Bernard A, 2014, AM Feature and Knowledge Based
https://doi.org/10.1016/j.cad.2015.04.001
Process Planning for Additive Manufacturing in Multiple
th
5. Vayre B, Vignat F, Villeneuve F, 2012, Metallic additive Parts Production Context. In: Proceedings of 25 Annual
manufacturing: State-of-the-art review and prospects. Mech International Solid Freeform Fabrication Symposium.

Volume 2 Issue 4 (2023) 12 https://doi.org/10.36922/msam.2103