Page 88 - MSAM-3-1
P. 88
Materials Science in Additive Manufacturing Bioactive hydrogels for 3D bioprinting
A B
C
D
-1
Figure 5. Shear thinning behavior of the hydrogel-BBG inks. Logarithmic plot of viscosity version shear rate for 0.1< < 1000 s for (A) H-BBG0,
(B) H-BBG10, (C) H-BBG15, and (D) H-BBG20.
Abbreviation: H-BBG: Hydrogel-bioactive borate glass.
A
B
Figure 6. Extrusion test results for (A) H-BBG0 at 20, 25, 30, 35, and 40°C and P = 35 kPa, and for (B) H-BBG20 at 20, 25, 30, 35 and 40°C and P = 75 kPa.
H-BBG0 and H-BBG20 showed ideal gelation at 25 and 35°C, respectively.
Abbreviation: H-BBG: Hydrogel-bioactive borate glass.
Volume 3 Issue 1 (2024) 9 https://doi.org/10.36922/msam.2845
