Page 124 - MSAM-3-2

Materials Science in Additive Manufacturing Hybrid lattice structures design with AI

References fracture properties of bio-inspired 3D printed suture
structures. Thin Walled Struct. 2022;176:109317.
1. Ashby MF, Evans AG, Fleck NA, Gibson LJ, Hutchinson JW,
Wadley HN. Metal Foams: A Design Guide. London: doi: 10.1016/j.tws.2022.109317
Butterworth-Heinemann; 2000. 12. Wu C, Peng C, Le TC, Das R, Tran P. Tunable 3D printed
2. Peng C, Tran P, Nguyen-Xuan H, Ferreira AJ. Mechanical composite metamaterials with negative stiffness. Smart
performance and fatigue life prediction of lattice structures: Mater Struct. 2023;32(12):125010.
Parametric computational approach. Compos Struct. doi: 10.1088/1361-665X/ad06df
2020;235:111821.
13. Ashby MF. The properties of foams and lattices. Philos Trans
doi: 10.1016/j.compstruct.2019.111821 A Math Phys Eng Sci. 2006;364(1838):15-30.
3. Wong M, Owen I, Sutcliffe CJ, Puri A. Convective heat doi: 10.1098/rsta.2005.1678
transfer and pressure losses across novel heat sinks fabricated
by Selective Laser Melting. Int J Heat Mass Tran. 2009;52(1- 14. Rashed MG, Ashraf M, Mines RA, Hazell PJ. Metallic
2):281-288. microlattice materials: A current state of the art on
manufacturing, mechanical properties and applications.
doi: 10.1016/j.ijheatmasstransfer.2008.06.002 Mater Des. 2016;95:518-533.
4. Zhang XY, Fang G, Zhou J. Additively manufactured doi: 10.1016/j.matdes.2016.01.146
scaffolds for bone tissue engineering and the prediction
of their mechanical behavior: A review. Materials (Basel). 15. Wang Y, Zhang L, Daynes S, Zhang H, Feih S, Wang MY.
2017;10(1)50. Design of graded lattice structure with optimized
mesostructures for additive manufacturing. Mater Des.
doi: 10.3390/ma10010050 2018;142:114-123.
5. Tran P, Peng C. Triply periodic minimal surfaces sandwich doi: 10.1016/j.matdes.2018.01.011
structures subjected to shock impact. J Sandwich Struct
Mater. 2020;23(6):2146-2175. 16. Wang P, Yang F, Li P, Zheng B, Fan H. Design and additive
manufacturing of a modified face-centered cubic lattice with
doi: 10.1177/1099636220905551 enhanced energy absorption capability. Extreme Mech Lett.
6. Peng C, Tran P. Bioinspired functionally graded gyroid 2021;47:101358.
sandwich panel subjected to impulsive loadings. Compos doi: 10.1016/j.eml.2021.101358
Part B Eng. 2020;188:107773.
17. Daynes S, Feih S, Lu WF, Wei J. Optimisation of functionally
doi: 10.1016/j.compositesb.2020.107773
graded lattice structures using isostatic lines. Mater Des.
7. Nguyen‐Van V, Peng C, Hazell PJ, Lee J, Nguyen‐Xuan H, 2017;127:215-223.
Tran P. Performance of meta concrete panels subjected to doi: 10.1016/j.matdes.2017.04.082
explosive load: Numerical investigations. Struct Concr.
2023;25:1590-1619. 18. Cao X, Zhang D, Liao B, et al. Numerical analysis of the
mechanical behavior and energy absorption of a novel
doi: 10.1002/suco.202200749
P-lattice. Thin Walled Struct. 2020;157:107147.
8. Catchpole-Smith S, Sélo RR, Davis AW, Ashcroft IA, doi: 10.1016/j.tws.2020.107147
Tuck CJ, Clare A. Thermal conductivity of TPMS lattice
structures manufactured via laser powder bed fusion. Addit 19. Lan T, Tran P. Multiscale topology optimization of lattice
Manuf. 2019;30:100846. structure using 3D moving hollow morphable bars. JOM.
2021;73(12):4141-4153.
doi: 10.1016/j.addma.2019.100846
doi: 10.1007/s11837-021-04917-2
9. Aremu AO, Brennan-Craddock JP, Panesar A, et al. A voxel-
based method of constructing and skinning conformal and 20. Al-Ketan O, Abu Al-Rub RK. Multifunctional mechanical
functionally graded lattice structures suitable for additive metamaterials based on triply periodic minimal surface
manufacturing. Addit Manuf. 2017;13:1-13. lattices. Adv Eng Mater. 2019;21(10):1900524.
doi: 10.1016/j.addma.2016.10.006 doi: 10.1002/adem.201900524
10. Peng C, Fox K, Qian M, Nguyen-Xuan H, Tran P. 3D 21. Han L, Che S. An overview of materials with triply
printed sandwich beams with bioinspired cores: Mechanical periodic minimal surfaces and related geometry: From
performance and modelling. Thin Walled Struct. biological structures to self-assembled systems. Adv Mater.
2021;161:107471. 2018;30(17):e1705708.
doi: 10.1016/j.tws.2021.107471 doi: 10.1002/adma.201705708
11. Wickramasinghe S, Peng C, Ladani R, Tran P. Analysing 22. Lan T, Peng C, Fox K, Do T, Tran P. Triply periodic minimal

Volume 3 Issue 2 (2024) 11 doi: 10.36922/msam.3430