Page 26 - MSAM-3-2

Materials Science in Additive Manufacturing Functional materials for AM

Consent for publication for sensor embedding into SUS316L with heat dissipative
inner cavity design. Met Mater Int. 2022;28:1-9.
Not applicable.
doi: 10.1007/s12540-021-01106-3
Availability of data 11. Lee J, Choe J, Park J, Yu JH, Kim S, Sung H. Microstructural

Not applicable. effects on the tensile and fracture behavior of selective laser
melted H13 tool steel under varying conditions. Mater
References Charact. 2019;55:109817.

1. Madhavadas V, Srivastava D, Chadha U, et al. A review on doi: 10.1016/j.matchar.2019.109817
metal additive manufacturing for intricately shaped aerospace 12. Verma S, Yang CK, Lin CH, Jeng JY. Additive manufacturing
components. CIRP J Manuf Sci Technol. 2022;39:18-36. of lattice structures for high strength mechanical interlocking
doi: 10.1016/j.cirpj.2022.07.005 of metal and resin during injection molding. Addit Manuf.
2022;49:102463.
2. Park JW, Shin YC, Kang HG, et al. In vivo analysis of post-
joint-peserving surgery fracture of 3D-printed Ti-6Al-4V doi: 10.1016/j.addma.2021.102463
implant to treat bone cancer. Bio Des Manuf. 2021;4:879-888. 13. Joyee EB, Pan Y. Additive manufacturing of multi-material
soft robot for on-demand drug delivery applications.
doi: 10.1007/s42242-021-00147-2
J Manuf Process. 2020;56:1178-1184.
3. Kim T, Kim JG, Park S, et al. Virtual surface morphology
generation of Ti-6Al-4V directed energy deposition via doi: 10.1016/j.jmapro.2020.03.059
conditional generative adversarial network. Virtual Phys 14. Rafiee M, Farahani RD, Therriault D. Multi‐material 3D and
Prototyp. 2023;18(1):e2124921. 4D printing: A survey. Adv Sci. 2020;7(12):1902307.
doi: 10.1080/17452759.2022.2124921 doi: 10.1002/advs.201902307

4. Tan LJ, Zhu W, Zhou K. Recent progress on polymer 15. Champeau M, Heinze DA, Viana TN, de Souza ER,
materials for additive manufacturing. Adv Funct Mater. Chinellato AC, Titotto S. 4D printing of hydrogels: A review.
2020;30(43):2003062. Adv Funct Mater. 2020;30(31):1910606.
doi: 10.1002/adfm.202003062 doi: 10.1002/adfm.201910606
5. Wu H, Fahy WP, Kim S, et al. Recent developments 16. Liu J, Shang Y, Shao Z, Liu X, Zhang C. Three-dimensional
in polymers/polymer nanocomposites for additive printing to translate simulation to architecting for three-
manufacturing. Prog Mater Sci. 2020;111:100638. dimensional high performance piezoelectric Energy
harvester. Ind Eng Chem Res. 2021;61(1):433-440.
doi: 10.1016/j.pmatsci.2020.100638
doi: 10.1021/acs.iecr.1c04433
6. Li J, Lin X, Kang N, Lu J, Wang Q, Huang W. Microstructure,
tensile and wear poperties of a novel graded al matrix 17. Zhang D, Lim WYS, Duran SSF, Loh XJ, Suwardi A. Additive
composite pepared by direct energy deposition. J Alloy manufacturing of thermoelectrics: Emerging trends and
Compd. 2020;826:154077. outlook. ACS Energy Lett. 2022;7(2):720-735.
doi: 10.1016/j.jallcom.2020.154077 doi: 10.1021/acsenergylett.1c02553
7. Seo E, Sung H, Jeon H, et al. Laser powder bed fusion 18. Park JW, Seo E, Park H, et al. Hybrid solid mesh structure
for AI assisted digital metal components. Virtual Phys for electron beam melting customized implant to treat bone
Prototyp. 2022;17(4):806-820. cancer. Int J Bioprinting. 2023;9(4):716.
doi: 10.1080/17452759.2022.2068804 doi: 10.18063/ijb.716
8. Hotz H, Zimmermann M, Greco S, Kirsch B, Aurich JC. 19. Culmone C, Smit G, Breedveld P. Additive manufacturing
Additive manufacturing of functionally graded Ti-Al of medical instruments: A state-of-the-art review. Addit
structures by laser-based direct energy deposition. J Manuf Manuf. 2019;27:461-473.
Process. 2021;68:1524-1534.
doi: 10.1016/j.addma.2019.03.015
doi: 10.1016/j.jmapro.2021.06.068
20. Huang J, Chen Q, Jiang H, et al. A survey of design methods
9. Jung ID, Lee MS, Lee J, et al. Embedding sensors using for material extrusion polymer 3D printing. Virtual Phys
selective laser melting for self-cognitive metal parts. Addit Prototyp. 2020;15(2):148-162.
Manuf. 2020;33:101151.
doi: 10.1080/17452759.2019.1708027
doi: 10.1016/j.addma.2020.101151
21. Hossain SS, Gao B, Park S, Bae CJ. Incorporating
10. Lee MS, Kim H, Koo YT, et al. Selective laser melting process nanoparticles in alumina ink for improved solid-loading

Volume 3 Issue 2 (2024) 20 doi: 10.36922/msam.3323