Page 84 - MSAM-3-2

Materials Science in Additive Manufacturing Mechanical properties of NiTi TPMS

doi: 10.1016/j.matdes.2022.111257 doi: 10.1016/j.jmatprotec.2021.117132

51. Chen W, Yang Q, Huang S, Kruzic JJ, Li X. Compression 54. Sinha A, Rajak DK, Shaik NB, et al. A review on 4D printing
behavior of graded NiTi gyroid-structures fabricated by of Nickel-Titanium smart alloy processing, the effect of
laser powder bed fusion additive manufacturing under major parameters and their biomedical applications. Proc
monotonic and cyclic loading. JOM. 2021;73(12):4154-4165. Inst Mech Eng E J Process Mech Eng. 2023.
doi: 10.1007/s11837-021-04938-x doi: 10.1177/09544089231154416
52. Sun L, Chen K, Geng P, Zhou Y, Wen S, Shi Y. Mechanical 55. Mohd Jani J, Leary M, Subic A, Gibson G. A review of shape
and shape memory properties of NiTi triply periodic memory alloy research, applications and opportunities.
minimal surface structures fabricated by laser powder bed Mater Des (1980-2015). 2014;56:1078-1113.
fusion. J Manuf Processes. 2023;101:1091-100. doi: 10.1016/j.matdes.2013.11.084
doi: 0.1016/j.jmapro.2023.06.034 56. Yang X, Yang Q, Shi Y, et al. Effect of volume fraction and unit
53. Bhardwaj A, Ojha M, Garudapalli A, Gupta AK. cell size on manufacturability and compressive behaviors of
Microstructural, mechanical and strain hardening behaviour Ni-Ti triply periodic minimal surface lattices. Addit Manuf.
of NiTi alloy subjected to constrained groove pressing and 2022;54:102737.
ageing treatment. J Mater Process Technol. 2021;294:117132. doi: 10.1016/j.addma.2022.102737

Volume 3 Issue 2 (2024) 21 doi: 10.36922/msam.3137