Page 42 - MSAM-3-3

Materials Science in Additive Manufacturing 3D-printed LMPA-integrated soft robots

doi: 10.18063/ijb.v6i1.253 robotic gripper based on integration of positive pressure and
partial filling. Soft Robot. 2022;9(2):309-323.
29. Kryou C, Leva V, Chatzipetrou M, Zergioti I. Bioprinting for
liver transplantation. Bioengineering. 2019;6(4):95. doi: 10.1089/soro.2020.0139
doi: 10.3390/bioengineering6040095 41. Li S, Stampfli JJ, Xu HJ, et al. A vacuum-driven origami
magic-ball soft gripper. In: 2019 International Conference
30. Jo HJ, Kang MS, Jang HJ, et al. Advanced approaches with on Robotics and Automation (ICRA). United States: IEEE;
combination of 2D nanomaterials and 3D printing for 2019. p. 7401-7408.
exquisite neural tissue engineering. Mater Sci Addit Manuf.
2023;2(2):0620. doi: 10.1109/ICRA.2019.8794068
doi: 10.36922/msam.0620 42. Faber JA, Arrieta AF, Studart AR. Bioinspired spring
origami. Science. 2018;359(6382):1386-1391.
31. Liu C, Ling C, Chen C, et al. Laser additive manufacturing
of magnesium alloys and its biomedical applications. Mater doi: 10.1126/science.aap7753
Sci Addit Manuf. 2022;1(4):24. 43. Liu Y, Tu K. Low melting point solders based on Sn, Bi, and
doi: 10.18063/msam.v1i4.24 In elements. Mater Today Adv. 2020;8:100115.
32. Xu W, Nassehi A, Liu F. Metal additive manufacturing doi: 10.1016/j.mtadv.2020.100115
of orthopedic bone plates: An overview. Mater Sci Addit 44. Daeneke T, Khoshmanesh K, Mahmood N, et al. Liquid
Manuf. 2023;2(4):2113. metals: Fundamentals and applications in chemistry. Chem
doi: 10.36922/msam.2113 Soc Rev. 2018;47(11):4073-4111.
33. Stano G, Percoco G. Additive manufacturing aimed to doi: 10.1039/c7cs00043j
soft robots fabrication: A review. Extreme Mech Lett. 45. Wang X, Guo R, Liu J. Liquid metal based soft robotics:
2021;42:101079. Materials, designs, and applications. Adv Mater Technol.
doi: 10.1016/j.eml.2020.101079 2019;4(2):1800549.
34. Sparrman B, Du Pasquier C, Thomsen C, et al. Printed doi: 10.1002/admt.201800549
silicone pneumatic actuators for soft robotics. Addit Manuf. 46. Xu S, Yang XH, Tang SS, Liu J. Liquid metal activated
2021;40:101860. hydrogen production from waste aluminum for power
doi: 10.1016/j.addma.2021.101860 supply and its life cycle assessment. Int J Hydrogen Energy.
2019;44(33):17505-17514.
35. Roels E, Terryn S, Brancart J, Verhelle R, Van Assche G,
Vanderborght B. Additive manufacturing for self-healing doi: 10.1016/j.ijhydene.2019.05.176
soft robots. Soft Robot. 2020;7(6):711-723. 47. Zhang XD, Yang XH, Zhou YX, et al. Experimental
doi: 10.1089/soro.2019.0081 investigation of Galinstan based Minichannel cooling for
high heat flux and large heat power thermal management.
36. Jin L, Cui W. On technical issues for underwater charging Energy Convers Manag. 2019;185:248-258.
of robotic fish schools using ocean renewable energy. Ships
Offshore Struct. 2023:1-11. doi: 10.1016/j.enconman.2019.02.010
doi: 10.1080/17445302.2023.2245164 48. Yan J, Lu Y, Chen G, Yang M, Gu Z. Advances in liquid
metals for biomedical applications. Chem Soc Rev.
37. El-Atab N, Mishra RB, Al-Modaf F, et al. Soft actuators 2018;47:2518-2533.
for soft robotic applications: A review. Adv Intell Syst.
2020;2(10):2000128. doi: 10.1039/C7CS00309A
49. Zhang M, Zhang P, Zhang C, Wang Y, Chang H, Rao W.
doi: 10.1002/aisy.202000128
Porous and anisotropic liquid metal composites with
38. Usevitch NS, Hammond ZM, Schwager M, Okamura AM, tunable reflection ratio for low-temperature electromagnetic
Hawkes EW, Follmer S. An untethered isoperimetric soft interference shielding. Appl Mater Today. 2020;19:100612.
robot. Sci Robot. 2020;5(40):eaaz0492.
doi: 10.1016/j.apmt.2020.100612
doi: 10.1126/scirobotics.aaz0492
50. Jiang J, Zhai X, Zhang K, et al. Low-melting-point alloys
39. Tang Y, Chi Y, Sun J, et al. Leveraging elastic instabilities integrated extrusion additive manufacturing. Addit Manuf.
for amplified performance: Spine-inspired high-speed and 2023;72:103633.
high-force soft robots. Sci Adv. 2020;6(19):eaaz6912.
doi: 10.1016/j.addma.2023.103633
doi: 10.1126/sciadv.aaz6912
51. Jiang J, Zhai X, Jin L, et al. Design for reversed additive
40. Wang Y, Yang Z, Zhou H, et al. Inflatable particle-jammed manufacturing low-melting-point alloys. J Eng Des. 2023:1-14.

Volume 3 Issue 3 (2024) 9 doi: 10.36922/msam.4144