Page 44 - MSAM-3-4

Materials Science in Additive Manufacturing Gyroid non-pneumatic tires through additive manufacturing

Biomaterials. 2011;32(29):6875-6882. photopolymerization of polymers and polymer composites:
Processes and applications. Addit Manuf. 2021;47:102279.
doi: 10.1016/j.biomaterials.2011.06.012
doi: 10.1016/j.addma.2021.102279
38. Kladovasilakis N, Tsongas K, Kostavelis I, Tzovaras D,
Tzetzis D. Effective mechanical properties of additive 48. Chaudhary R, Fabbri P, Leoni E, Mazzanti F, Akbari R,
manufactured triply periodic minimal surfaces: Antonini C. Additive manufacturing by digital light processing:
Experimental and finite element study. Int J Adv Manuf A review. Prog Addit Manuf. 2023;8(2):331-351.
Technol. 2022;121(11-12):7169-7189. doi: 10.1007/s40964-022-00336-0
doi: 10.1007/s00170-022-09651-w 49. Hornbeck LJ. In: Wu MH, editor. Digital Light Processing
39. Shaikh A, Griffis J, Stebbins R, et al. Towards gradient design for High-brightness High-Resolution Applications. Berlin:
of TPMS lattices and laser powder bed fusion processing- Springer; 1997. p. 27-40.
role of laser strategies and lattice thickness. Manuf Lett. doi: 10.1117/12.273880
2024;41:1046-1054.
50. U. 3D Systems. Material Properties, Flex BLK 20. 3D
doi: 10.1016/j.mfglet.2024.09.129 Systems, USA. Available from: https://www.3dsystems.com/
40. Zhao M, Zhang DZ, Liu F, Li Z, Ma Z, Ren Z. Mechanical materials/figure-4-flex-blk-20 [Last accessed on 2024 Jul
and energy absorption characteristics of additively 11].
manufactured functionally graded sheet lattice structures 51. ASTM D695. Standard Test Method for Compressive Properties of
with minimal surfaces. Int J Mech Sci. 2020;167:105262. Rigid Plastics. United States: ASTM International; 2010. p. 1-8.
doi: 10.1016/j.ijmecsci.2019.105262 doi: 10.1520/D0695-15.2
41. Ejeh CJ, Barsoum I, Abu Al-Rub RK. Flexural properties 52. Panesar A, Abdi M, Hickman D, Ashcroft I. Strategies for
of functionally graded additively manufactured AlSi10Mg functionally graded lattice structures derived using topology
TPMS latticed-beams. Int J Mech Sci. 2022;223:107293. optimisation for additive manufacturing. Addit Manuf.
doi: 10.1016/j.ijmecsci.2022.107293 2018;19:81-94.
42. Al-Ketan O, Lee DW, Rowshan R, Abu Al-Rub RK. doi: 10.1016/j.addma.2017.11.008
Functionally graded and multi-morphology sheet TPMS 53. Yoon H, Lee K, Lee J, Kwon J, Seo T. The stiffness adjustable
lattices: Design, manufacturing, and mechanical properties. wheel mechanism based on compliant spoke deformation.
J Mech Behav Biomed Mater. 2020;102:103520. Sci Rep. 2024;14(1):773.
doi: 10.1016/j.jmbbm.2019.103520 doi: 10.1038/s41598-024-51493-x
43. Yang L, Mertens R, Ferrucci M, Yan C, Shi Y, Yang S. 54. Viet NV, Zaki W. Free vibration and buckling characteristics
Continuous graded Gyroid cellular structures fabricated of functionally graded beams with triply periodic minimal
by selective laser melting: Design, manufacturing and surface architecture. Compos Struct. 2021;274:114342.
mechanical properties. Mater Des. 2019;162:394-404.
doi: 10.1016/j.compstruct.2021.114342
doi: 10.1016/j.matdes.2018.12.007
55. Shah GJ, Nazir A, Lin SC, Jeng JY. Design for additive
44. Zhang X, Jiang L, Yan X, Wang Z, Li X, Fang G. Revealing the manufacturing and investigation of surface-based lattice
apparent and local mechanical properties of heterogeneous structures for buckling properties using experimental and
lattice: A multi-scale study of functionally graded scaffold. finite element methods. Materials (Basel). 2022;15(11):4037.
Virtual Phys Prototyp. 2023;18(1):e2120406.
doi: 10.3390/ma15114037
doi: 10.1080/17452759.2022.2120406
56. Zhao W, Wang G, Cheng T, Liu Y. Review of space
45. Kim HS, Kim DY, Choi JW, Park SH. High stability in manufacturing technique and developments. Sci Sin Phys
compressive and shear behavior of airless tire using primitive Mech Astron. 2020;50(4):047006.
TPMS-based cylindrical spoke. Int J Precis Eng Manufac
Green Technol. 2024;11(4):1247-1262. doi: 10.1360/SSPMA-2019-0416
57. Liu M, Tang W, Duan W, et al. Digital light processing of
doi: 10.1007/s40684-023-00587-4
lunar regolith structures with high mechanical properties.
46. Kim DY, Kim HS, Kamath SS, Hou X, Choi JW, Park SH. Ceram Int. 2019;45(5):5829-5836.
TPMS-based auxetic structure for high-performance airless doi: 10.1016/j.ceramint.2018.12.049
tires with variable stiffness depending on deformation. Sci
Rep. 2024;14(1):11419. 58. Wang W, Jin Y, Mu Y, Zhang M, Du J. A novel tubular
structure with negative Poisson’s ratio based on gyroid-
doi: 10.1038/s41598-024-62101-3
type triply periodic minimal surfaces. Virtual Phys
47. Al Rashid A, Ahmed W, Khalid MY, Koç M. Vat Prototyp. 2023;18(1):e2203701.

Volume 3 Issue 4 (2023) 13 doi: 10.36922/msam.5022