Page 113 - MSAM-4-1

Materials Science in Additive Manufacturing Topology optimization of an aluminum bicycle pedal
crank using laser powder bed fusion

11. Costa J, Sequeiros E, Vieira MT, Vieira M. Additive Optimizing Metal AM Potential through DfAM: Design,
manufacturing: Material extrusion of metallic parts. U Porto Performance, and Industrial Impact. London: IntechOpen; 2024.
J Eng. 2021;7:53-69.
24. Oliveira C, Maia M, Costa J. Production of an office stapler
doi: 10.24840/2183-6493_007.003_0005 by material extrusion process, using DfAM as optimization
strategy. U Porto J Eng. 2023;9:28-41.
12. Gebhardt A, Kessler J, Thurn L. 5 Perspectives and Strategies
of Additive Manufacturing. In: 3D Printing. 2 ed. Germany: doi: 10.24840/2183-6493_009-001_001635
nd
Hanser; 2019. p. 137-165.
25. Brackett D, Ashcroft I, Hague R. Topology optimization for
13. Gibson I, Rosen D, Stucker B, Khorasani M. Binder Jetting. additive manufacturing. In: Proceedings of the 22 Annual
nd
Berlin: Springer International Publishing; 2021. p. 237-252. International Solid Freeform Fabrication Symposium-An
Additive Manufacturing Conference, SFF 2011, Austin, TX;
14. Egan PF. Design for additive manufacturing: Recent
innovations and future directions. Designs. 2023;7:83. 2011. p. 348-362.
26. Plocher J, Panesar A. Review on design and structural
doi: 10.3390/designs7040083
optimisation in additive manufacturing: Towards
15. Chen H, Wei Q, Wen S, Li Z, Shi Y. Flow behavior of next-generation lightweight structures. Mater Design.
powder particles in layering process of selective laser 2019;183:108164.
melting: Numerical modeling and experimental verification
based on discrete element method. Int J Mach Tool Manuf. doi: 10.1016/j.matdes.2019.108164
2017;123:146-159. 27. Ibhadode O, Zhang Z, Sixt J, et al. Topology optimization for
metal additive manufacturing: Current trends, challenges,
16. Sun X, Chen M, Liu T, et al. Characterization, preparation,
and reuse of metallic powders for laser powder bed fusion: and future outlook. Virtual Phys Prototy. 2023;18:2181192.
A review. Int J Extreme Manuf. 2024;6:012003. doi: 10.1080/17452759.2023.2181192
doi: 10.1088/2631-7990/acfbc3 28. Diegel O, Nordin A, Motte D. A Practical Guide to Design for
Additive Manufacturing. Berlin: Springer; 2019.
17. Veetil JK, Khorasani M, Ghasemi A, et al. Build position-
based dimensional deviations of laser powder-bed fusion of 29. ASM International. Aluminum Science and Technology.
stainless steel 316L. Precis Eng. 2021;67:58-68. Vol. 2A. Netherlands: ASM International; 2018.
doi: 10.1016/j.precisioneng.2020.09.024 doi: 10.31399/asm.hb.v02a.9781627082075
18. Sehhat MH, Mahdianikhotbesara A. Powder spreading 30. Su J, Ng WL, An J, Yeong WY, Chua CK, Sing SL.
in laser-powder bed fusion process. Granular Matter. Achieving sustainability by additive manufacturing:
2021;23:89. A state-of-the-art review and perspectives. Virtual Phys
Prototyp. 2024;19:e2438899.
doi: 10.1007/s10035-021-01162-x
doi: 10.1080/17452759.2024.2438899
19. Parteli EJR, Poschel T. Particle-based simulation of powder
application in additive manufacturing. Powder Technol. 31. Sbrugnera Sotomayor NA, Caiazzo F, Alfieri V. Enhancing
2016;288:96-102. design for additive manufacturing workflow: Optimization,
design and simulation tools. Appl Sci. 2021;11:6628.
doi: 10.1016/j.powtec.2015.10.035
doi: 10.3390/app11146628
20. Haferkamp L, Haudenschild L, Spierings A, et al. The
influence of particle shape, powder flowability, and powder 32. Mata M, Pinto M, Costa J. Topological optimization of a
layer density on part density in laser powder bed fusion. metal extruded doorhandle using ntopology. U Porto J Eng.
Metals-Basel. 2021;11:418. 2023;9:42-54.
doi: 10.3390/met11030418 doi: 10.24840/2183-6493_009-001_001620
21. Mostafaei A, Ghiaasiaan R, Ho IT, et al. Additive 33. Rometsch PA, Zhu Y, Wu X, Huang A. Review of high-
manufacturing of nickel-based superalloys: A state-of-the- strength aluminium alloys for additive manufacturing by
art review on process-structure-defect-property relationship. laser powder bed fusion. Mater Design. 2022;219:110779.
Prog Mater Sci. 2023;136:101108.
doi: 10.1016/j.matdes.2022.110779
doi: 10.1016/j.pmatsci.2023.101108
34. Tofail SAM, Koumoulos EP, Bandyopadhyay A, Bose S,
22. Costa JM, Vieira MF. Teaching design for AM to science O’Donoghue L, Charitidis C. Additive manufacturing:
materials engineering graduate students: Hand-on approach. Scientific and technological challenges, market uptake and
Modern Concepts Mater Sci. 2024;6. opportunities. Mater Today. 2018;21:22-37.
doi: 10.33552/MCMS.2024.06.000640 doi: 10.1016/j.mattod.2017.07.001
23. Costa JM, Sequeiros EW, Figueiredo D, Reis AR, Vieira MF. 35. Shimano. Shimano SLX M7000 Hollowtech II Crank.

Volume 4 Issue 1 (2025) 14 doi: 10.36922/MSAM025040003