Page 138 - MSAM-4-2

Materials Science in Additive Manufacturing Mouthguards: Disinfection versus properties changes

32. Amirabad LM, Tahriri M, Zarrintaj P, Ghaffari R, 42. Calvo-Correas T, Benitez M, Larraza I, Ugarte L, Peña-
Tayebi L. Preparation and characterization of TiO2‐coated Rodríguez C, Eceiza A. Advanced and traditional processing
polymerization of methyl methacrylate (PMMA) for of thermoplastic polyurethane waste. Polym Degrad Stab.
biomedical applications: In vitro study. Asia Pac J Chem Eng. 2022;198:109880.
2022;17:e2761.
doi: 10.1016/j.polymdegradstab.2022.109880
doi: 10.1002/apj.2761
43. Giakoumakis NS, Vos C, Janssens K, et al. Total revalorization
33. Lopes LR, Silva AF, Carneiro OS. Multi-material 3D of high impact polystyrene (HIPS): Enhancing styrene
printing: The relevance of materials affinity on the boundary recovery and upcycling of the rubber phase. Green Chem.
interface performance. Addit Manuf. 2018;23:45-52. 2024;26(1):340-352.
doi: 10.1016/j.addma.2018.06.027 doi: 10.1039/D3GC02407E
34. ASTM. ASTM D790-03: Standard Test Method for 44. Thanh Truc NT, Lee BK. Combining ZnO/microwave
Flexural Properties of Unreinforced and Reinforced treatment for changing wettability of WEEE styrene plastics
Plastics and Electrical Insulation Materials. Available (ABS and HIPS) and their selective separation by froth
from: https://cdn.standards.iteh.ai/samples/27059/ flotation. Appl Surf Sci. 2017;420:746-752.
f08b79ad9a784319871f02f70e5b399a/astm-d790-03.pdf
[Last accessed on 2025 Jan 13]. doi: 10.1016/j.apsusc.2017.04.075
45. Sekhar VC, Nampoothiri KM, Mohan AJ, Nair NR, Bhaskar T,
35. Boisse P, Colmars J, Hamila N, Naouar N, Steer Q. Bending
and wrinkling of composite fiber preforms and prepregs. Pandey A. Microbial degradation of high impact polystyrene
(HIPS), an e-plastic with decabromodiphenyl oxide and
A review and new developments in the draping simulations. antimony trioxide. J Hazard Mater. 2016;318:347-354.
Compos Part B Eng. 2018;141:234-249.
doi: 10.1016/j.jhazmat.2016.07.008
doi: 10.1016/j.compositesb.2017.12.061
46. Elashmawi IS, Hakeem NA. Effect of PMMA addition on
36. Kumar A, Venkatappa Rao T, Ray Chowdhury S, Ramana
Reddy SVS. Compatibility confirmation and refinement of characterization and morphology of PVDF. Polym Eng Sci.
thermal and mechanical properties of poly (lactic acid)/poly 2008;48(5):895-901.
(ethylene-co-glycidyl methacrylate) blend reinforced by doi: 10.1002/pen.21032
hexagonal boron nitride. React Funct Polym. 2017;117:1-9.
47. Huszank R, Szilágyi E, Szoboszlai Z, Szikszai Z. Investigation
doi: 10.1016/j.reactfunctpolym.2017.05.005 of chemical changes in PMMA induced by 1.6 MeV He
+
irradiation by ion beam analytical methods (RBS-ERDA) and
37. International Organization for Standardization. ISO 179-
1:2023 Determination of Charpy impact properties. Part 1: infrared spectroscopy (ATR-FTIR). Nucl Instrum Methods
Non instrumented impact test. Available from: https://www. Phys Res B Beam Interact Mater Atoms. 2019;450:364-368.
iso.org/standard/84393.html [Last accessed on 2025 Jan 15]. doi: 10.1016/j.nimb.2018.05.016
38. International Organization for Standardization. ISO 6507- 48. Aziza SB, Abdullaha OG, Brzac MA, Azawyd AK, Tahir
1:2023 Metallic materials-Vickers Hardness Test. Available DA. Effect of carbon nano-dots (CNDs) on structural and
from: https://www.iso.org/standard/83898.html [Last optical properties of PMMA polymer composite. Results
accessed on 2025 Jan 13]. Phys. 2019;15:102776.
39. Deng Y, Peng C, Dai M, et al. Recent development of doi: 10.1016/j.rinp.2019.102776
super-wettable materials and their applications in oil-water 49. Ramesh S, Leen KH, Kumutha K, Arof AK. FTIR studies of
separation. J Clean Prod. 2020;266:121624.
PVC/PMMA blend based polymer electrolytes. Spectrochim
doi: 10.1016/j.jclepro.2020.121624 Acta A Mol Biomol Spectrosc. 2007;66(4-5):1237-1242.
40. Nituica M, Oprea O, Stelescu MD, et al. Polymeric bio doi: 10.1016/j.saa.2006.06.012
composite based on thermoplastic polyurethane (TPU)
and protein and elastomeric waste mixture. Materials. 50. O’Toole GA. Classic spotlight: Plate counting you can count
2023;16:5279. on. J Bacteriol. 2016;198:3127.
doi: 10.1128/JB.00711-16
doi: 10.3390/ma16155279
51. Cummins NK, Spears IR. The effect of mouthguard design
41. Arash S, Akbari B, Ghaleb S, Kaffashi B, Marouf BT. on stresses in the tooth-bone complex. Med Sci Sports Exerc.
Preparation of PLA-TPU-nanoclay composites and
characterization of their morphological, mechanical, and 2002;34(6):942-947.
shape memory properties. J Mech Behav Biomed Mater. doi: 10.1097/00005768-200206000-00006
2023;139:105642.
52. Amza CG, Zapciu A, Baciu F, Radu C. Effect of UV-C
doi: 10.1016/j.jmbbm.2022.105642 radiation on 3D printed ABS-PC polymers. Polymers

Volume 4 Issue 2 (2025) 15 doi: 10.36922/MSAM025130018