Page 26 - MSAM-4-3

Materials Science in Additive Manufacturing Ceramic vat photopolymerization

doi: 10.1088/1758-5082/6/4/045002 doi: 10.1080/17452759.2019.1710919
66. Lian Q, Sui W, Wu X, Yang F, Yang S. Additive manufacturing 77. Fu Y, Xu G, Chen Z, Liu C, Wang D, Lao C. Multiple metals
of ZrO2 ceramic dental bridges by stereolithography. Rapid doped polymer-derived SiOC ceramics for 3D printing.
Prototyp J. 2018;24(1):114-119. Ceram Int. 2018;44(10):11030-11038.
doi: 10.1108/RPJ-09-2016-0144 doi: 10.1016/j.ceramint.2018.03.075
67. Bae CJ, Halloran JW. Influence of residual monomer on 78. Zocca A, Gomes CM, Staude A, Bernardo E,
cracking in ceramics fabricated by stereolithography. Int J Günster J, Colombo P. SiOC ceramics with ordered porosity
Appl Ceram Technol. 2011;8(6):1289-1295. by 3D-printing of a preceramic polymer. J Mater Res.
2013;28(17):2243-2252.
doi: 10.1111/j.1744-7402.2011.02611.x
doi: 10.1557/jmr.2013.129
68. Bae CJ, Ramachandran A, Halloran JW. Quantifying particle
segregation in sequential layers fabricated by additive 79. Zhou S, Mei H, Chang P, Lu M, Cheng L. Molecule
manufacturing. J Eur Ceram Soc. 2018;38:4082-4088. editable 3D printed polymer-derived ceramics. Coord Chem
Rev. 2020;422:213486.
doi: 10.1016/j.jeurceramsoc.2018.07.040
doi: 10.1016/j.ccr.2020.213486
69. Mitteramskogler G, Gmeiner R, Felzmann R, et al.
Light curing strategies for lithography-based additive 80. Hundley JM, Eckel ZC, Schueller E, et al. Geometric
manufacturing of customized ceramics. Addit Manuf. characterization of additively manufactured polymer
2014;1:110-118. derived ceramics. Addit Manuf. 2017;18:95-102.
doi: 10.1016/j.addma.2014.08.004 doi: 10.1016/j.addma.2017.09.005
70. Pfaffinger M, Mitteramskogler G, Gmeiner R, 81. Zanchetta E, Cattaldo M, Franchin G, et al. Stereolithography
Stampfl J. Thermal Debinding of Ceramic-filled Photopolymers. of SiOC ceramic microcomponents. Adv Mater.
Switzerland: Trans Tech Publ; 2015. p. 75-81. 2016;28(2):370-376.
doi: 10.1002/9781119183860.ch10 doi: 10.1002/adma.201503470
71. Eckel ZC, Zhou C, Martin JH, Jacobsen AJ, Carter WB, 82. Li S, Duan W, Zhao T, et al. The fabrication of SiBCN
Schaedler TA. Additive manufacturing of polymer-derived ceramic components from preceramic polymers by digital
ceramics. Science. 2016;351(6268):58-62. light processing (DLP) 3D printing technology. J Eur Ceram
Soc. 2018;38(14):4597-4603.
doi: 10.1126/science.aad2688
doi: 10.1016/j.jeurceramsoc.2018.05.043
72. Chaudhary RP, Parameswaran C, Idrees M, et al. Additive
manufacturing of polymer-derived ceramics: Materials, 83. Wang X, Schmidt F, Hanaor D, Kamm PH, Li S,
technologies, properties and potential applications. Prog Gurlo A. Additive manufacturing of ceramics from
Mater Sci. 2022;128:100969. preceramic polymers: A versatile stereolithographic
approach assisted by thiol-ene click chemistry. Addit Manuf.
doi: 10.1016/j.pmatsci.2022.100969
2019;27:80-90.
73. Toma L, Kleebe HJ, Müller MM, et al. Correlation doi: 10.1016/j.addma.2019.02.012
between intrinsic microstructure and piezoresistivity in
a SiOC polymer‐derived ceramic. J Am Ceram Soc. 2012; 84. Brodnik NR, Schmidt J, Colombo P, Faber KT. Analysis
95(3):1056-1061. of multi-scale mechanical properties of ceramic trusses
prepared from preceramic polymers. Addit Manuf.
doi: 10.1111/j.1551-2916.2011.05026.x
2020;31:100957.
74. Colombo P, Bernardo E, Parcianello G. Multifunctional doi: 10.1016/j.addma.2019.100957
advanced ceramics from preceramic polymers and nano-
sized active fillers. J Eur Ceram Soc. 2013;33(3):453-469. 85. Gyak KW, Vishwakarma NK, Hwang YH, Kim J,
Yun HS, Kim DP. 3D-printed monolithic SiCN ceramic
doi: 10.1016/j.jeurceramsoc.2012.10.006
microreactors from a photocurable preceramic resin for
75. Kim KJ, Eom JH, Kim YW, Seo WS. Electrical conductivity the high temperature ammonia cracking process. 10.1039/
of dense, bulk silicon-oxycarbide ceramics. J Eur Ceram Soc. C9RE00201D. React Chem Eng. 2019;4(8):1393-1399.
2015;35(5):1355-1360.
doi: 10.1039/C9RE00201D
doi: 10.1016/j.jeurceramsoc.2014.12.009
86. Schmidt J, Altun AA, Schwentenwein M, Colombo P.
76. Li Z, Chen Z, Liu J, et al. Additive manufacturing of Complex mullite structures fabricated via digital light
lightweight and high-strength polymer-derived SiOC processing of a preceramic polysiloxane with active alumina
ceramics. Virtual Phys Prototyp. 2020;15(2):163-177. fillers. J Eur Ceram Soc. 2019;39(4):1336-1343.

Volume 4 Issue 3 (2025) 20 doi: 10.36922/MSAM025200031