Page 25 - MSAM-4-3

Materials Science in Additive Manufacturing Ceramic vat photopolymerization

doi: 10.1007/s10853-010-4934-1 55. Scheithauer U, Schwarzer E, Moritz T, Michaelis A. Additive
manufacturing of ceramic heat exchanger: Opportunities
43. Widgeon S, Mera G, Gao Y, Sen S, Navrotsky A, Riedel R.
Effect of precursor on speciation and nanostructure and limits of the lithography-based ceramic manufacturing
of SiBCN polymer‐derived ceramics. J Am Ceram Soc. (LCM). J Mater Eng Perform. 2018;27(1):14-20.
2013;96(5):1651-1659. doi: 10.1007/s11665-017-3056-1
doi: 10.1111/jace.12217 56. Lantada AD, de Blas Romero A, Schwentenwein M,
44. Griffith ML, Halloran JW. Freeform fabrication of ceramics via Jellinek C, Homa J. Lithography-based ceramic manufacture
stereolithography. J Am Ceram Soc. 1996;79(10):2601-2608. (LCM) of auxetic structures: Present capabilities and
challenges. Smart Mater Struct. 2016;25(5):054015.
doi: 10.1111/j.1151-2916.1996.tb09022.x
doi: 10.1088/0964-1726/25/5/054015
45. Schwartz KB, Rowcliffe DJ. Modeling density contributions
in preceramic polymer/ceramic powder systems. J Am 57. Qu P, Liang G, Hussain MI, et al. Low-temperature
Ceram Soc. 1986;69(5):C-106. fabrication of high-specific strength SiC-based ceramics
via photopolymerization 3D printing with controllable
doi: 10.1111/j.1151-2916.1986.tb04782.x anisotropy. Int J Extreme Manuf. 2025;7(5):055002.
46. Wang WL, Cheah CM, Fuh JYH, Lu L. Influence of process doi: 10.1088/2631-7990/add2e1
parameters on stereolithography part shrinkage. Mater
Design. 1996;17(4):205-213. 58. Luo X, Ren W, Xing H, Hussain MI, Chen Z. Additively
manufactured Li4SiO4 ceramic pebbles with radial pores
doi: 10.1016/S0261-3069(97)00020-1
for enhanced performance. Ceram Int. 2025.
47. Travitzky N, Bonet A, Dermeik B, et al. Additive doi. 10.1016/j.ceramint.2025.01.332
manufacturing of ceramic-based materials. Adv Eng Mater.
2014;16(6):729-754. 59. Ren W, Liu W, Luo X, Liu Z, Liu C, Chen Z. 3D printing of
cordierite glass-ceramics. Ceram Int. 2025;51(2):1632-1642.
doi: 10.1002/adem.201400097
60. Gentry SP, Halloran JW. Depth and width of cured lines in
48. He R, Liu W, Wu Z, et al. Fabrication of complex-shaped photopolymerizable ceramic suspensions. J Eur Ceram Soc.
zirconia ceramic parts via a DLP- stereolithography-based 2013;33(10):1981-1988.
3D printing method. Ceram Int. 2018;44(3):3412-3416.
doi: 10.1016/j.jeurceramsoc.2013.02.012
doi: 10.1016/j.ceramint.2017.11.135
61. de Hazan Y, Penner D. SiC and SiOC ceramic
49. Zhou M, Liu W, Wu H, et al. Preparation of a defect-free
alumina cutting tool via additive manufacturing based articles produced by stereolithography of acrylate
on stereolithography - Optimization of the drying and modified polycarbosilane systems. J Eur Ceram Soc.
debinding processes. Ceram Int. 2016;42(10):11598-11602. 2017;37(16):5205-5212.
doi: 10.1016/j.ceramint.2016.04.007 doi: 10.1016/j.jeurceramsoc.2017.03.021
50. Li S, Shan Y, Chen J, et al. 3D printing and biomedical 62. Badev A, Abouliatim Y, Chartier T, et al. Photopolymerization
applications of piezoelectric composites: A critical review. kinetics of a polyether acrylate in the presence of ceramic
Adv Mater Technol. 2025;10(5):2401160. fillers used in stereolithography. J Photochem Photobiol A.
2011;222(1):117-122.
51. Hamza M, Kanwal Q, Hussain MI, et al. Recent progress
in 3D printed piezoelectric materials for biomedical doi: 10.1016/j.jphotochem.2011.05.010
applications. Mater Sci Eng R Rep. 2025;164:100962. 63. Leigh SJ, Purssell C, Bowen J, Hutchins DA,
52. Zhang P, He R. 3D-printed silicon nitride ceramic implants Covington JA, Billson D. A miniature flow sensor fabricated
for clinical applications: The state of the art and prospects. by micro-stereolithography employing a magnetite/acrylic
RSC Adv. 2025;15(1):406-419. nanocomposite resin. Sens Actuat A. 2011;168(1):66-71.
53. Scheithauer U, Schwarzer E, Ganzer G, et al. Microhreactors doi: 10.1016/j.sna.2010.12.007
made by lithography‐based ceramic manufacturing (LCM). 64. Chen W, Kirihara S, Miyamoto Y. Fabrication and
In: Additive Manufacturing and Strategic Technologies in measurement of micro three‐dimensional photonic crystals
Advanced Ceramics: Ceramic Transactions. Vol. 258. United of SiO2 ceramic for terahertz wave applications. J Am Ceram
States: Wiley; 2015. p. 31-41. Soc. 2007;90(7):2078-2081.
doi: 10.1002/9781119183860.ch3 doi: 10.1111/j.1551-2916.2007.01724.x
54. Schwentenwein M, Homa J. Additive manufacturing of dense 65. Du D, Asaoka T, Ushida T, Furukawa KS. Fabrication and
alumina ceramics. Int J Appl Ceram Technol. 2015;12(1):1-7.
perfusion culture of anatomically shaped artificial bone
doi: 10.1111/ijac.12324 using stereolithography. Biofabrication. 2014;6(4):045002.

Volume 4 Issue 3 (2025) 19 doi: 10.36922/MSAM025200031