Page 37 - IJAMD-1-3

International Journal of AI for
Materials and Design
Prediction of wall geometry for wire arc additive manufacturing

surface appearance for wire and arc additive manufacturing multi-layer GMAW based additive manufacturing
of Bainite steel. Int J Adv Manuf Technol. 2017;91:301-313. using infrared thermography. J Mater Process Technol.
2017;244:215-224.
doi: 10.1007/s00170-016-9621-1
doi: 10.1016/j.jmatprotec.2017.01.024
7. Ayarkwa KF, Williams S, Ding J. Investigation of pulse
advance cold metal transfer on aluminium wire arc additive 17. Kumar V, Mandal A, Das AK, Kumar S. Parametric study
manufacturing. Int J Rapid Manuf. 2015;5:44. and characterization of wire arc additive manufactured steel
structures. Int J Adv Manuf Technol. 2021;115:1723-1733.
doi: 10.1504/ijrapidm.2015.073547
doi: 10.1007/s00170-021-07261-6
8. Kazanas P, Deherkar P, Almeida P, Lockett H,
Williams S. Fabrication of geometrical features using wire 18. Mai DS, Doan TK, Paris H. Wire and arc additive
and arc additive manufacture. Proc Inst Mech Eng Part B J manufacturing of 308L stainless steel components:
Eng Manuf. 2012;226:1042-1051. Optimization of processing parameters and material
properties. Eng Sci Technol Int J. 2021;24:1015-1026.
doi: 10.1177/0954405412437126
19. Chaudhari R, Parmar H, Vora J, Patel VK. Parametric study
9. Zhao W, Wei Y, Long J, Chen J, Liu R, Ou W. Modeling
and simulation of heat transfer, fluid flow and geometry and investigations of bead geometries of GMAW-based
morphology in GMAW-based wire arc additive wire-arc additive manufacturing of 316L stainless steels.
manufacturing. Weld World. 2021;65:1571-1590. Metals. 2022;12:1232.
doi: 10.3390/met12071232
doi: 10.1007/s40194-021-01123-1
20. Natrayan L, Anand R, Kumar SS. Optimization of process
10. Vázquez L, Rodríguez N, Rodríguez I, Alberdi E, Alvarez P.
Influence of interpass cooling conditions on microstructure parameters in TIG welding of AISI 4140 stainless steel using
and tensile properties of Ti-6Al-4V parts manufactured by Taguchi technique. Mater Today Proc. 2021;37:1550-1553.
WAAM. Weld World. 2020;64:1377-1388. doi: 10.1016/j.matpr.2020.07.150
doi: 10.1007/s40194-020- 00921-3 21. Vora J, Parikh N, Chaudhari R, et al. Optimization of
bead morphology for GMAW-based wire-arc additive
11. Reisgen U, Sharma R, Mann S, Oster L. Increasing the
manufacturing efficiency of WAAM by advanced cooling manufacturing of 2.25 Cr-1.0 Mo steel using metal-cored
strategies. Weld World. 2020;64:1409-1416. wires. Appl Sci. 2022;12:5060.
doi: 10.3390/app12105060
doi: 10.1007/s40194-020-00930-2
22. Kumar A, Maji K. Selection of process parameters for near-
12. Ma Y, Cuiuri D, Shen C, Li H, Pan Z. Effect of interpass
temperature on in-situ alloying and additive manufacturing net shape deposition in wire arc additive manufacturing by
of titanium aluminides using gas tungsten arc welding. genetic algorithm. J Mater Eng Perform. 2020;29:3334-3352.
Addit Manuf. 2015;8:71-77. doi: 10.1007/s11665-020-04847-1
doi: 10.1016/j.addma.2015.08.001 23. Liberini M, Astarita A, Campatelli G, et al. Selection
of optimal process parameters for wire arc additive
13. Shen C, Pan Z, Cuiuri D, Ding D, Li H. Influences of
deposition current and interpass temperature to the manufacturing. Procedia Cirp. 2017;62:470-474.
Fe3Al-based iron aluminide fabricated using wire-arc doi: 10.1016/j.procir.2016.06.124
additive manufacturing process. Int J Adv Manuf Technol. 24. Wang L, Wu T, Wang D, et al. A novel heterogeneous multi-
2017;88:2009-2018.
wire indirect arc directed energy deposition for in-situ
doi: 10.1007/s00170-016-8935-3 synthesis Al-Zn-Mg-Cu alloy: Process, microstructure and
mechanical properties. Addit Manuf. 2023;72:103639.
14. Wu B, Ding D, Pan Z, et al. Effects of heat accumulation on
the arc characteristics and metal transfer behavior in Wire doi: 10.1016/j.addma.2023.103639
Arc Additive Manufacturing of Ti6Al4V. J Mater Process 25. Mishra V, Ayas C, Langelaar M, Van Keulen F. Simultaneous
Technol. 2017;250:304-312.
topology and deposition direction optimization for Wire and
doi: 10.1016/j.jmatprotec.2017.07.037 Arc Additive Manufacturing. Manuf Lett. 2022;31:45-51.
15. Xiong J, Li Y, Li R, Yin Z. Influences of process parameters doi: 10.1016/j.mfglet.2021.05.011
on surface roughness of multi-layer single-pass thin- walled 26. Xiong J, Zhang G, Hu J, Li Y. Forecasting process parameters
parts in GMAW-based additive manufacturing. J Mater for GMAW-based rapid manufacturing using closed-loop
Process Technol. 2018;252:128-136.
iteration based on neural network. Int J Adv Manuf Technol.
doi: 10.1016/j.jmatprotec.2017.09.020 2013;69:743-751.
16. Yang D, Wang G, Zhang G. Thermal analysis for single-pass doi: 10.1007/s00170- 013-5038-2

Volume 1 Issue 3 (2024) 31 doi: 10.36922/ijamd.4285