Page 52 - IJB-5-2

Multicomponent bioprinting based on microfluidic printheads
014-9842-8. 29. Kamholz AE, Weigl BH, Finlayson BA, et al., 1999,
25. Hardin JO, Ober TJ, Valentine AD, et al., 2015, 3D Printing: Quantitative Analysis of Molecular Interaction in a Microfluidic
Microfluidic Printheads for Multimaterial 3D Printing of Channel: The T-sensor. Anal Chem, 71(23):5340-7.
Viscoelastic Inks. Adv Mater, 27(21):3279-84. DOI 10.1002/ DOI 10.1021/ac990504j.
adma.201570145. 30. Ameya J, 2011, Numerical Simulation of Immiscible Liquid-
26. Zhao Y, Chen G, Quan Y, 2010, Liquid–liquid Two-phase liquid Flow in Microchannels using Lattice Boltzmann
Mass Transfer in the T-junction Microchannels. AIChE J, Method. Sci China Chem, 54(1):244-56. DOI 10.1007/
53(12):3042-53. DOI 10.1002/aic.11333. s11426-010-4164-z.
27. Kakavandi FH, Rahimi M, Jafari O, et al., 2016, Liquid–liquid 31. Chakraborty D, Bose N, Sasmal S, et al., 2012, Effect of
Two-phase Mass Transfer in T-type Micromixers with Different Dispersion on the Diffusion Zone in Two-phase Laminar
Junctions and Cylindrical Pits. Chem Eng Process Process Flows in Microchannels. Anal Chim Acta, 710(2):88-93. DOI
Intensification, 107:58-67. DOI 10.1016/j.cep.2016.06.011. 10.1016/j.aca.2011.10.040.
28. Pandey S, Gupta A, Chakrabarti DP, et al., 2006, Liquid–liquid 32. Govindarajan R, Sahu KC, 2014, Instabilities in Viscosity-
Two Phase Flow Through a Horizontal T-junction. Chem Eng stratified Flow. Annu Rev Fluid Mech, 46(1):331-53. DOI
Res Des, 84(10):895-904. DOI 10.1205/cherd05061. 10.1146/annurev-fluid-010313-141351.

48 International Journal of Bioprinting (2019)–Volume 5, Issue 2