Page 116 - IJB-6-2

Scaffolds produced by combining porogen leaching and emulsion templating
Pickering High Internal Phase Emulsions. Langmuir, 32:38– Printing. Appl Phys Rev, 6:011307. DOI: 10.1063/1.5053909
45. DOI: 10.1021/acs.langmuir.5b03037 38. Ng WL, Lee JM, Zhou M, et al., 2020, Vat Polymerization-
26. Williams JM, Gray AJ, Wilkerson MH, 1990, Emulsion based Bioprinting Process, Materials, Applications and
Stability and Rigid Foams from Styrene or Divinylbenzene Regulatory Challenges. Biofabrication, 12:022001. DOI:
Water-in-oil Emulsions. Langmuir, 6:437–44. DOI: 10.1021/ 10.1088/1758-5090/ab6034
la00092a026 39. Zhang J, Hu Q, Wang S, et al., 2020, Digital Light Processing
27. Williams JM, Wrobleski DA, 1988, Spatial Distribution Based Three-dimensional Printing for Medical Applications.
of the Phases in Water-in-oil Emulsions. Open and Closed Int J Bioprint, 6:1–10.
Microcellular Foams from Cross-linked Polystyrene. 40. Thadavirul N, Pavasant P, Supaphol P, 2014, Development
Langmuir, 4:656–62. DOI: 10.1021/la00081a027 of Polycaprolactone Porous Scaffolds by Combining Solvent
28. Robinson JL, Moglia RS, Stuebben MC, et al., 2013, Casting, Particulate Leaching, and Polymer Leaching
Achieving Interconnected Pore Architecture in Injectable Techniques for Bone Tissue Engineering. J Biomed Mater
PolyHIPEs for Bone Tissue Engineering. Tissue Eng Part A, Res Part A, 102:3379–92. DOI: 10.1002/jbm.a.35010
20:1103–12. DOI: 10.1089/ten.tea.2013.0319 41. Kim TG, Chung HJ, Park TG, 2008, Macroporous and
29. Knight E, Murray B, Carnachan R, et al., 2011, Alvetex®: Nanofibrous Hyaluronic Acid/collagen Hybrid Scaffold
Polystyrene Scaffold Technology for Routine Three Fabricated by Concurrent Electrospinning and Deposition/
Dimensional Cell Culture. In: Haycock JW, editor. 3D Cell leaching of Salt Particles. Acta Biomater, 4:1611–9. DOI:
Culture: Methods and Protocols. Humana Press, Totowa, NJ. 10.1016/j.actbio.2008.06.008
pp. 323–40. DOI: 10.1007/978-1-60761-984-0_20 42. Sin D, Miao X, Liu G, et al., 2010, Polyurethane (PU)
30. Viswanathan P, Johnson DW, Hurley C, et al., 2014, 3D Scaffolds Prepared by Solvent Casting/particulate Leaching
Surface Functionalization of Emulsion-Templated Polymeric (SCPL) Combined with Centrifugation. Mater Sci Eng C,
Foams. Macromolecules, 47:7091–8. DOI: 10.1021/ 30:78–85. DOI: 10.1016/j.msec.2009.09.002
ma500968q 43. Bencherif SA, Braschler TM, Renaud P, 2013, Advances in
31. Cameron NR, Sherrington DC, Albiston L, et al., 1996, the Design of Macroporous Polymer Scaffolds for Potential
Study of the Formation of the Open-cellular Morphology Applications in Dentistry. J Periodontal Implant Sci, 43:251–
of Poly(styrene/divinylbenzene) polyHIPE Materials by 61. DOI: 10.5051/jpis.2013.43.6.251
cryo-SEM. Colloid Polym Sci, 274:592–5. DOI: 10.1007/ 44. Hutmacher DW, 2001, Scaffold Design and Fabrication
bf00655236 Technologies for Engineering Tissues State of the Art and
32. Stevens M Mand George J H, 2005, Exploring and Future Perspectives. J Biomater Sci Polym Ed, 12:107–24.
Engineering the Cell Surface Interface. Science, 310:1135–8. 45. Venkatesan J, Bhatnagar I, Manivasagan P, et al., 2015,
33. Sears NA, Dhavalikar PS, Cosgriff-Hernandez EM, 2016, Alginate Composites for Bone Tissue Engineering: A Review.
Emulsion Inks for 3D Printing of High Porosity Materials. Int J Biol Macromol, 72:269–81.
Macromol Rapid Commun, 37:1369–74. DOI: 10.1002/ 46. Schindelin J, Arganda-Carreras I, Frise E, et al., 2012, Fiji:
marc.201600236 An Open-source Platform for Biological-image Analysis. Nat
34. Sears N, Dhavalikar P, Whitely M, et al., 2017, Fabrication Methods, 9:676–82. DOI: 10.1038/nmeth.2019
of Biomimetic Bone Grafts with Multi-material 3D Printing. 47. Schneider CA, Rasband WS, Eliceiri KW, 2012, NIH Image
Biofabrication, 9:025020. DOI: 10.1088/1758-5090/aa7077 to Image J: 25 Years of Image Analysis. Nat Methods, 9:671–
35. Susec M, Ligon SC, Stampfl J, et al., 2013, Hierarchically 5. DOI: 10.1038/nmeth.2089
Porous Materials from Layer-by-layer Photopolymerization 48. Owen R, Bahmaee H, Claeyssens F, et al., 2020, Comparison of the
of High Internal Phase Emulsions. Macromol Rapid Commun, Anabolic Effects of Reported Osteogenic Compounds on Human
34:938–43. DOI: 10.1002/marc.201300016 Mesenchymal Progenitor-derived Osteoblasts. Bioengineering
36. Johnson DW, Sherborne C, Didsbury MP, et al., 2013, (Basel), 7:7010012. DOI: 10.3390/bioengineering7010012
Macrostructuring of Emulsion-templated Porous Polymers by 49. Linkert M, Rueden CT, Allan C, et al., 2010, Metadata
3D Laser Patterning. Adv Mater, 25:3178–81. DOI: 10.1002/ Matters: Access to Image Data in the Real World. J Cell Biol,
adma.201300552 189:777–82.
37. Lee JM, Ng WL, Yeong WY, 2019, Resolution and Shape in 50. Paljevac M, Gradišnik L, Lipovšek S, et al., 2018, Multiple-
Bioprinting: Strategizing Towards Complex Tissue and Organ Level Porous Polymer Monoliths with Interconnected Cellular

112 International Journal of Bioprinting (2020)–Volume 6, Issue 2