Page 406 - IJB-10-6
P. 406
International Journal of Bioprinting 3D-printed PCL-MNP multifunctional scaffolds
Figure 3. Characterization of 3D-printed PCL and PCL-MNP scaffolds. (A) Differential scanning calorimetric (DSC) curves. (B) Thermograms obtained
from thermal gravimetric analysis (TGA). (C) Representative stress versus strain curves. (D) Young’s modulus. (E) Degradation test. (F) Fourier-transform
infrared (FTIR) spectra of each fabricated scaffold. *p < 0.05; n = 3. Abbreviations: MNP, magnetic nanoparticles; PCL, polycaprolactone.
Volume 10 Issue 6 (2024) 398 doi: 10.36922/ijb.4538
