Page 499 - IJB-10-6

International Journal of Bioprinting Nanomaterial-bioinks for DLP bioprinting

Further disclosure 11. Liang R, Gu Y, Wu Y, Bunpetch V, Zhang S. Lithography-
based 3D bioprinting and bioinks for bone repair
Part of the findings have been presented Additive and regeneration. ACS Biomater Sci Eng. 2021;7(3):
Manufacturing Meets Medicine (AMMM 2022) - Lübeck, 806-816.
Deutschland, 13–15. September 2022. doi: 10.1021/acsbiomaterials.9b01818
12. Kim SH, Kim DY, Lim TH, Park CH. Silk fibroin bioinks for
References digital light processing (DLP) 3D bioprinting. Adv Exp Med
Biol. 2020;1249:53-66.
1. Maruyama M, Rhee C, Utsunomiya T, et al. Modulation of doi: 10.1007/978-981-15-3258-0_4
the inflammatory response and bone healingr Review. Front
Endocrinol. 2020;11:386. 13. Shen Y, Tang H, Huang X, et al. DLP printing photocurable
doi: 10.3389/fendo.2020.00386 chitosan to build bio-constructs for tissue engineering.
Carbohydr Polym. 2020;235:115970.
2. Ko HF, Sfeir C, Kumta PN. Novel synthesis strategies for doi: 10.1016/j.carbpol.2020.115970
natural polymer and composite biomaterials as potential
scaffolds for tissue engineering. Philos Trans A Math Phys 14. Sheng L, Li M, Zheng S, Qi J. Adjusting the accuracy
Eng Sci. 2010;368(1917):1981-1997. of PEGDA-GelMA vascular network by dark pigments
doi: 10.1098/rsta.2010.0009 via digital light processing printing. J. Biomater Appl.
2022;36(7):1173-1187.
3. LeGeros RZ. Properties of osteoconductive biomaterials: doi: 10.1177/08853282211053081
calcium phosphates. Clin Orthop Relat Res. 2002;395:81-98.
doi: 10.1097/00003086-200202000-00009 15. Song P, Gui X, Wu L, et al. DLP fabrication of multiple
hierarchical biomimetic GelMA/SilMA/HAp scaffolds
4. Dimitriou R, Mataliotakis GI, Angoules AG, Kanakaris NK, for enhancing bone regeneration. Biomacromolecules.
Giannoudis PV. Complications following autologous bone 2024;25(3):1871-1886.
graft harvesting from the iliac crest and using the RIA: a doi: 10.1021/acs.biomac.3c01318
systematic review. Injury. 2011;42:S3-S15. 16. Tao J, Zhu S, Liao X, et al. DLP-based bioprinting of void-
doi: 10.1016/j.injury.2011.06.015
forming hydrogels for enhanced stem-cell-mediated bone
5. Nauth A, Schemitsch E, Norris B, Nollin Z, Watson JT. regeneration. Mater Today Bio. 2022;17:100487.
Critical-size bone defects: is there a consensus for diagnosis doi: 10.1016/j.mtbio.2022.100487
and treatment? J Orthop Trauma. 2018;32(Suppl 1):S7-S11. 17. Park SH, Park DS, Shin JW, et al. Scaffolds for bone tissue
doi: 10.1097/bot.0000000000001115 engineering fabricated from two different materials by the
6. Aktuglu K, Erol K, Vahabi A. Ilizarov bone transport and rapid prototyping technique: PCL versus PLGA. J Mater Sci
treatment of critical-sized tibial bone defects: a narrative Mater Med. 2012;23(11):2671-2678.
review. J Orthop Traumatol. 2019;20(1):22. doi: 10.1007/s10856-012-4738-8
doi: 10.1186/s10195-019-0527-1 18. Tibbitt MW, Rodell CB, Burdick JA, Anseth KS. Progress in
7. Zhu W, Ma X, Gou M, Mei D, Zhang K, Chen S. 3D printing material design for biomedical applications. Proc Natl Acad
of functional biomaterials for tissue engineering. Curr Opin Sci. 2015;112(47):14444-14451.
Biotechnol. 2016;40:103-112. doi: 10.1073/pnas.1516247112
doi: 10.1016/j.copbio.2016.03.014 19. Nguyen DG, Funk J, Robbins JB, et al. Bioprinted 3D
8. Haglin JM, Eltorai AE, Gil JA, Marcaccio SE, Botero- primary liver tissues allow assessment of organ-level
Hincapie J, Daniels AH. Patient-specific orthopaedic response to clinical drug induced toxicity in vitro. Plos One.
implants. Orthop Surg. 2016;8(4):417-424. 2016;11(7):e0158674.
doi: 10.1111/os.12282 doi: 10.1371/journal.pone.0158674
9. Mobbs RJ, Parr WCH, Huang C, Amin T. Rapid 20. Lee KY, Mooney DJ. Hydrogels for tissue engineering. Chem
personalised virtual planning and on-demand surgery for Rev. 2001;101(7):1869-1880.
acute spinal trauma using 3D-printing, biomodelling and doi: 10.1021/cr000108x
patient-specific implant manufacture. J Pers Med. 2022; 21. Levato R, Visser J, Planell JA, Engel E, Malda J, Mateos-
12(6):997. Timoneda MA. Biofabrication of tissue constructs by 3D
doi: 10.3390/jpm12060997 bioprinting of cell-laden microcarriers. Biofabrication.
2014;6(3):035020.
10. Ozbolat IT, Hospodiuk M. Current advances and future
perspectives in extrusion-based bioprinting. Biomaterials. doi: 10.1088/1758-5082/6/3/035020
2016;76:321-343. 22. Leijten J, Rouwkema J, Zhang YS, Nasajpour A, Dokmeci
doi: 10.1016/j.biomaterials.2015.10.076 MR, Khademhosseini A. Advancing tissue engineering:

Volume 10 Issue 6 (2024) 491 doi: 10.36922/ijb.4015