Page 551 - IJB-10-6

International Journal of Bioprinting Design and property of PLPG/PDLA scaffold

doi: 10.1016/j.apsusc.2021.151159 with Gemini quaternary ammonium salts. Polymers.
2023;15:317.
28. Feng C, Ma B, Xu M, et al. Three-dimensional printing of doi: 10.3390/polym15020317
scaffolds with synergistic effects of micro–nano surfaces and
hollow channels for bone regeneration. ACS Biomater Sci 33. Zhao Z, Yang L, Hu Y, et al. Enzymatic degradation of
Eng. 2020;7:872-880. block copolymers obtained by sequential ring opening
doi: 10.1021/acsbiomaterials.9b01824 polymerization of l-lactide and ε-caprolactone. Polym
Degrad Stabil. 2007;92:1769-1777.
29. Fan T, Qin J, Dong F, et al. Effects on the crystallization doi: 10.1016/j.polymdegradstab.2007.07.012
behavior and biocompatibility of poly(LLA-ran-PDO-ran-
GA) with poly(d-lactide) as nucleating agents. RSC Adv. 34. Chen Z, Ding D, Yu T, et al. Enzymatic degradation behaviors
2022;12:10711-10724. and kinetics of bio-degradable jute/poly (lactic acid)(PLA)
doi: 10.1039/d2ra00525e composites. Compos Commun. 2022;33:101227.
doi: 10.1016/j.coco.2022.101227
30. Yu H, Chen X, Cai J, et al. Novel porous three-dimensional
nanofibrous scaffolds for accelerating wound healing. Chem 35. Huang Q, Hiyama M, Kabe T, et al. Enzymatic self-
Eng J. 2019;369:253-262. biodegradation of poly(l-lactic acid) films by embedded heat-
doi: 10.1016/j.cej.2019.03.091 treated and immobilized proteinase K. Biomacromolecules.
2020;21:3301-3307.
31. Peng MW, Yu XL, Guan Y, et al. Underlying promotion doi: 10.1021/acs.biomac.0c00759
mechanism of high concentration of silver nanoparticles on
anammox process. ACS Nano. 2019;13:14500-14510. 36. Arbeiter D, Lebahn K, Reske T, et al. Comparison of
doi: 10.1021/acsnano.9b08263 accelerated and enzyme-associated real-time degradation
of HMW PLLA and HMW P3HB films. Polym Test.
32. Zhang Y, Ge T, Li Y, et al. Anti-fouling and anti-biofilm 2022;107:107471.
performance of self-polishing waterborne polyurethane doi: 10.1016/j.polymertesting.2021.107471

Volume 10 Issue 6 (2024) 543 doi: 10.36922/ijb.4645