Page 41 - IJB-7-2

Zhang, et al.
https://doi.org/10.4028/www.scientific.net/msf.250.151. Properties of Additively Manufactured Components. Virtual
22. Wang P, Li X, Jiang Y, et al., 2020, Electron Beam Melted Phys Prototyp, 15:251–64.
Heterogeneously Porous Microlattices for Metallic Bone https://doi.org/10.1080/17452759.2020.1733430.
Applications: Design and Investigations of Boundary and 34. Sadrnezhaad SK, Ahmadi E, Malekzadeh M, 2009,
Edge Effects. Addit Manuf, 36:101566. Mechanism of Reaction of Molten NiTi with EBM Graphite
https://doi.org/10.1016/j.addma.2020.101566. Crucible. Mater Sci Technol, 25:699–706.
23. Li F, Li J, Xu G, et al., 2015, Fabrication, Pore Structure and https://doi.org/10.1179/174328408x317075.
Compressive Behavior of Anisotropic Porous Titanium for 35. Hayat MD, Chen G, Khan S, et al., 2018, Physical and
Human Trabecular Bone Implant Applications. J Mech Behav Tensile Properties of the NiTi Alloy by Selective Electron
Biomed Mater, 46:104–14. Beam Melting. Key Eng Mater, 770:148–54.
https://doi.org/10.1016/j.jmbbm.2015.02.023. https://doi.org/10.4028/www.scientific.net/kem.770.148.
24. Attarilar S, Ebrahimi M, Djavanroodi F, et al., 2021, 3D 36. Dutkiewicz J, Rogal Ł, Kalita D, et al., 2020, Superelastic
Printing Technologies in Metallic Implants: A Thematic Effect in NiTi Alloys Manufactured Using Electron Beam
Review on the Techniques and Procedures. Int J Bioprint, and Focused Laser Rapid Manufacturing Methods. J Mater
7:306. Eng Perform, 29:4463–73.
https://doi.org/10.18063/ijb.v7i1.306. https://doi.org/10.1007/s11665-020-04938-z.
25. Elahinia MH, Hashemi M, Tabesh M, et al., 2012, 37. Zhai W, Wang P, Ng FL, et al., 2021, Hybrid Manufacturing
Manufacturing and Processing of NiTi Implants: A Review. of γ-TiAl and Ti-6Al-4V Bimetal Component with Enhanced
Prog Mater Sci, 57:911–46. Strength using Electron Beam Melting. Compos B Eng,
https://doi.org/10.1016/j.pmatsci.2011.11.001. 207:108587.
26. Wu MH, 2001, Fabrication of Nitinol Materials and https://doi.org/10.1016/j.compositesb.2020.108587.
Components. Mater Sci Forum, 394–395:285–92. 38. Wang P, Song J, Nai ML, et al., 2020, Experimental Analysis
27. Aydoǧmus T, Bor AS, 2011, Production and Characterization of Additively Manufactured Component and Design
of Porous TiNi Shape Memory Alloys. Turk J Eng Environ Guidelines for Lightweight Structures: A Case Study Using
Sci, 35:69–82. Electron Beam Melting. Addit Manuf, 33:101088.
28. Ma C, Gu D, Dai D, et al., 2018, Selective Growth of https://doi.org/10.1016/j.addma.2020.101088.
Ni4Ti3 Precipitate Variants Induced by Complicated Cyclic 39. Zhou Q, Hayat MD, Chen G, et al., 2019, Selective Electron
Stress During Laser Additive Manufacturing of NiTi-Based Beam Melting of NiTi: Microstructure, Phase Transformation
Composites. Mater Charact, 143:191–6. and Mechanical Properties. Mater Sci Eng A, 744:290–8.
https://doi.org/10.1016/j.matchar.2018.04.004. 40. Thompson SM, Bian L, Shamsaei N, et al., 2015, An Overview
29. Parvizi S, Hashemi SM, Asgarinia F, et al., 2020, Effective of Direct Laser Deposition for Additive Manufacturing; Part
Parameters on the Final Properties of NiTi-based Alloys I : Transport Phenomena, Modeling and Diagnostics. Addit
Manufactured by Powder Metallurgy Methods: A Review. Manuf, 8:36–62.
Prog Mater Sci, 117:100739. https://doi.org/10.1016/j.addma.2015.07.001.
https://doi.org/10.1016/j.pmatsci.2020.100739. 41. Lee J, Shin YC, 2019, Effects of Composition and Post Heat
30. Yusuf SM, Gao N, 2017, Influence of Energy Density on Treatment on Shape Memory Characteristics and Mechanical
Metallurgy and Properties in Metal Additive Manufacturing. Properties for Laser Direct Deposited Nitinol. Laser Manuf
Mater Sci Tech Lond, 33:1269–89. Mater Process, 6:41–58.
31. Otubo J, Rigo OD, Moura NC, et al., 2003, Scale Up of NiTi https://doi.org/10.1007/s40516-019-0079-5.
Shape Memory Alloy Production by EBM. J Phys, 112:873–6. 42. Yu WH, Sing SL, Chua CK, et al., 2019, Particle-Reinforced
https://doi.org/10.1051/jp4:20031020. Metal Matrix Nanocomposites Fabricated by Selective Laser
32. Harun WS, Kamariah MS, Muhamad N, et al., 2018, A Melting: A State of the Art Review. Prog Mater Sci, 104:330–79.
Review of Powder Additive Manufacturing Processes for https://doi.org/10.1016/j.pmatsci.2019.04.006.
Metallic Biomaterials. Powder Technol, 327:128–51. 43. Lu B, Cui X, Ma W, et al., 2020, Promoting the Heterogeneous
https://doi.org/10.1016/j.powtec.2017.12.058. Nucleation and the Functional Properties of Directed Energy
33. Wang P, Goh MH, Li Q, et al., 2020, Effect of Defects and Deposited NiTi Alloy by Addition of La2O3. Addit Manuf,
Specimen Size with Rectangular Cross-Section on the Tensile 33:101150.

International Journal of Bioprinting (2021)–Volume 7, Issue 2 37