Page 136 - IJB-7-4

Mass Customization of Respiratory Protective Equipment
for 3D Printing of Electronics. Adv Electron Mater, 5:1800831. https://doi.org/10.3233/wor-2012-0383-1771
https://doi.org/10.1002/aelm.201800831 38. Wu YY, Acharya D, Xu C, et al., 2018, Custom-Fit Three-
27. Choong YY, Maleksaeedi S, Eng H, et al., 2020, High Speed dimensional-printed BiPAP Mask to Improve Compliance
4D Printing of Shape Memory Polymers with Nanosilica. in Patients Requiring Long-term Noninvasive Ventilatory
Appl Mater Today, 18:100515. Support. J Med Dev, 12:0310031-8.
https://doi.org/10.1016/j.apmt.2019.100515 https://doi.org/10.1115/1.4040187
28. Tan HW, Saengchairat N, Goh GL, et al., 2020, Induction 39. Ma Z, Hyde P, Drinnan M, et al., 2021, Custom Three-
Sintering of Silver Nanoparticle Inks on Polyimide Substrates. Dimensional-Printed CPAP Mask Development, Preliminary
Adv Mater Technol, 5:1900897. Comfort and Fit Evaluation. J Med Dev, 15:024501.
https://doi.org/10.1002/admt.201900897 https://doi.org/10.1115/1.4050201
29. Ng WL, Chua CK, Shen YF, 2019, Print me an Organ! Why 40. Martelly E, Rana S, Shimada K, 2021, Design and
we are not there yet. Prog Polym Sci, 97:101145. Fabrication of Custom-Fit BiPAP and CPAP Masks Using
https://doi.org/10.1016/j.progpolymsci.2019.101145 Three-Dimensional Imaging and Three-Dimensional Printing
30. Bibb R, Eggbeer D, Evans P, 2010, Rapid Prototyping Techniques. J Med Dev, 15:024502.
Technologies in Soft Tissue Facial Prosthetics: Current State https://doi.org/10.1115/1.4049981
of the Art. Rapid Prototyp J, 16:25852. 41. Cai M, Li H, Shen S, et al., 2018, Customized Design and
https://doi.org/10.1108/13552541011025852 3D Printing of Face Seal for an N95 Filtering Facepiece
31. Eggbeer D, Evans PL, Bibb R, 2006, A Pilot Study in the Respirator. J Occup Environ Hyg, 15:226-34.
Application of Texture Relief for Digitally Designed Facial https://doi.org/10.1080/15459624.2017.1411598
Prostheses. Proc Inst Mech Eng Part H, 220:705-14. 42. Finne H, Liacouras P, Wilsnack AR, et al., Custom Fit N95
https://doi.org/10.1243/09544119jeim38 Respirator Acceptability and Fit. Bethesda, Maryland, United
32. Kai CC, Meng CS, Ching LS, et al., 2000, Facial prosthetic States: Walter Reed National Military Medical Center.
model fabrication using rapid prototyping tools. Integr Manuf 43. Stokes AA, 2021, 3DPPE: Rapid 3D Printing of Personalised
Syst, 11:42-53. Protective Facemasks and Visors to WHO Standard for
https://doi.org/10.1108/09576060010303668 Healthcare Workers Treating SARS-CoV-2 Patients.
33. Pallari J, Dalgarno K, Munguia J, et al. 2010, Design and 44. Choong YY, Tan HW, Patel DC, et al., 2002, The Global Rise
Additive Fabrication of Foot and Ankle-foot Orthoses. In: of 3D Printing during the COVID-19 Pandemic. Nat Rev
Proceedings of the 21 Annual International Solid Freeform Mater, 5:637-639.
st
Fabrication Symposium an Additive Manufacturing https://doi.org/10.1038/s41578-020-00234-3
Conference. 45. Sherborne C, Claeyssens F, 2021, Considerations Using
https://doi.org/10.32656/2018_29sff_symposium Additive Manufacture of Emulsion Inks to Produce
34. Pallari JH, Dalgarno KW, Woodburn J, 2001, Mass Respiratory Protective Filters against Viral Respiratory Tract
Customization of Foot Orthoses for Rheumatoid Arthritis Infections Such as the COVID-19 Virus. Int J Bioprint, 7:316.
Using Selective Laser Sintering. IEEE Trans Biomed Eng, https://doi.org/10.18063/ijb.v7i1.316
57:1750-6. 46. Shpichka A, et al., 2020, Engineering a Model to Study
https://doi.org/10.1109/tbme.2010.2044178 Viral Infections: Bioprinting, Microfluidics, and Organoids
35. Eggbeer D, Bibb R, Williams R, 2005, The Computer-aided to Defeat Coronavirus Disease 2019 (COVID-19). Int J
Design and Rapid Prototyping Fabrication of Removable Bioprint, 6:302.
Partial Denture Frameworks. Proc Inst Mech Eng Part H, https://doi.org/10.18063/ijb.v6i4.302
219:195-202. 47. Bishop EG, Leigh SJ, 2020, Using Large-scale Additive
https://doi.org/10.1243/095441105x9372 Manufacturing as a Bridge Manufacturing Process in
36. Salles AS, Gyi DE, 2013, Delivering Personalised Insoles to Response to Shortages in Personal Protective Equipment
the High Street Using Additive Manufacturing. Int J Comput during the COVID-19 Outbreak. Int J Bioprint, 6:281.
Integr Manuf, 2013. 26:386-400. https://doi.org/10.18063/ijb.v6i4.281
https://doi.org/10.1080/0951192x.2012.717721 48. Celik HK, Kose O, Ulmeanu ME, et al., 2020, Design
37. Salles AS, Gyi DE, 2012, The Specification of Personalised and Additive Manufacturing of Medical Face Shield for
Insoles Using Additive Manufacturing. Work, 41:1771-4. Healthcare Workers Battling Coronavirus (COVID-19). Int J

132 International Journal of Bioprinting (2021)–Volume 7, Issue 4