Page 148 - IJB-7-4

3D-Printed Anti-Tumor Scaffolds
Scaffolds for Orthopedic Tissue Engineering Applications. Extrusion and Its 3D Printing of Poly(Lactic Acid)/
SN Appl Sci, 2:192. Poly(Styrene-co-Methyl Methacrylate) Blends. Appl Sci,
25. Nurulhuda A, Aqmaliah SH, Ali R, et al., 2019, Multi-Layered 9:5153.
ABS Scaffold Fabrication via Fused Deposition Modelling 33. Chen PC, Chou CC, Chiang CH, Systematically Studying
(FDM) 3D Printing. J Mech Contin Math Sci, 4:131–8. Dissolution Process of 3D Printed Acrylonitrile Butadiene
https://doi.org/10.26782/jmcms.spl.4/2019.11.00013 Styrene (ABS) Mold for Creation of Complex and Fully
26. Wang ZZ, Yang Y, 2021, Application of 3D Printing in Transparent Polydimethylsiloxane (PDMS) Fluidic Devices.
Implantable Medical Devices. Biomed Res Int, 2021:6653967. BioChip J, 15:144–51.
https://doi.org/10.1155/2021/6653967 34. Andrzejewski J, Marciniak-Podsadna L, 2020, Development
27. Limongi T, Susa F, Allione M, et al., 2020, Drug Delivery of Thermal Resistant FDM Printed Blends. The Preparation
Applications of Three-Dimensional Printed (3DP) of GPET/PC Blends and Evaluation of Material Performance.
Mesoporous Scaffolds. Pharmaceutics, 12:851. Materials, 13:2057.
https://doi.org/10.3390/pharmaceutics12090851 https://doi.org/10.3390/ma13092057
28. Zhang B, Seong B, Nguyen V, et al., 2016, 3D Printing 35. Baran EH, Erbil HY, 2019, Surface Modification of 3D
of High-Resolution PLA-Based Structures by Hybrid Printed PLA Objects by Fused Deposition Modeling:
Electrohydrodynamic and Fused Deposition Modeling A Review. Colloid Interface, 3:43.
Techniques. J Micromech Microeng, 26:025015. https://doi.org/10.3390/colloids3020043
https://doi.org/10.1088/0960-1317/26/2/025015 36. Singhvi MS, Zinjarde SS, Gokhale DV, 2019, Polylactic Acid:
29. Hedayati SK, Behravesh AH, Hasannia S, et al., 2020, Synthesis and Biomedical Applications. J Appl Microbiol,
3D Printed PCL Scaffold Reinforced with Continuous 127:1612–26.
Biodegradable Fiber Yarn: A Study on Mechanical and Cell https://doi.org/10.1111/jam.14290
Viability Properties. Polym Test, 83:106347. 37. Lasprilla AJ, Martinez GA, Lunelli BH, et al., 2012, Poly-
30. Babu NV, Venkateshwaran N, Rajini N, et al., 2021, Influence Lactic Acid Synthesis for Application in Biomedical
of Slicing Parameters on Surface Quality and Mechanical Devices-a Review. Biotechnol Adv, 30:321–8.
Properties of 3D-Printed CF/PLA Composites Fabricated by https://doi.org/10.1016/j.biotechadv.2011.06.019
FDM teChnique. Mater Technol, 2021:1-18. 38. Fouladian P, Kohlhagen J, Arafat M, et al., 2020, Three-
https://doi.org/10.1080/10667857.2021.1915056 Dimensional Printed 5-Fluorouracil Eluting Polyurethane
31. Viidik L, Vesala J, Laitinen R, et al., 2021, Preparation and Stents for the Treatment of Oesophageal Cancers. Biomater
Characterization of Hot-Melt Extruded Polycaprolactone- Sci, 8:6625–36.
Based Filaments Intended for 3D-Printing of Tablets. Eur J https://doi.org/10.1039/d0bm01355b
Pharm Sci, 158:105619. 39. Gorrasi G, Pantani R, 2018, Hydrolysis and Biodegradation
32. Solorio-Rodriguez LE, Vega-Rios A, 2019, Filament of Poly (Lactic Acid). Adv Polym Sci, 279:119–51.

144 International Journal of Bioprinting (2021)–Volume 7, Issue 4