Page 66 - IJB-7-4

Filament Structure, 3D printing, Bone Repair Scaffolds
115. Doucet G, Ryan S, Bartellas M, et al., 2017, Modelling and 127. Koch L, Deiwick A, Chichkov B, 2014, Laser-based 3D Cell
Manufacturing of a 3D Printed Trachea for Cricothyroidotomy Printing for Tissue Engineering. Bionanomaterials, 15:71–8.
Simulation. Cureus, 9:e1575. https://doi.org/10.1515/bnm-2014-0005
https://doi.org/10.7759/cureus.1575 128. Furukawa KS, Imura K, Tateishi T, et al., 2008, Scaffold-
116. Jin ZW, Li Y, Yu K, et al., 2021, 3D Printing of Physical free Cartilage by Rotational Culture for Tissue Engineering.
Organ Models: Recent Developments and Challenges. Adv J Biotechnol, 133:134–45.
Sci, 2021:2101394. https://doi.org/10.1016/j.jbiotec.2007.07.957
https://doi.org/10.1002/advs.202101394 129. Keeney M, Pandit A, 2009, The Osteochondral Junction and
117. Hollister SJ. Hollister SJ, 2005, Porous Scaffold Design for its Repair via Bi-Phasic Tissue Engineering Scaffolds. Tissue
Tissue Engineering. Nat Mater, 4:518–24. Eng Part B Rev, 15:55–73.
https://doi.org/10.1038/nmat1421 https://doi.org/10.1089/ten.teb.2008.0388
118. Hutmacher DW, 2000, Scaffolds in Tissue Engineering Bone 130. Zhang H, Huang H, Hao G, et al., 2020, 3D Printing Hydrogel
and Cartilage. Biomaterials, 21:2529–43. Scaffolds with Nanohydroxyapatite Gradient to Effectively
https://doi.org/10.1016/S0142-9612(00)00121-6 Repair Osteochondral Defects in Rats. Adv Funct Mater,
119. Vaz CM, Tuijl S V, Bouten C, et al., 2005, Design of Scaffolds 31:2006697.
for Blood Vessel Tissue Engineering Using a Multi-layering https://doi.org/10.1002/adfm.202006697
Electrospinning Technique. Acta Biomater, 1:575–82. 131. Amini AR, Laurencin CT, Nukavarapu SP, 2012, Bone Tissue
https://doi.org/10.1016/j.actbio.2005.06.006 Engineering: Recent Advances and Challenges. Crit Rev
120. Ma PX, 2004, Scaffolds for Tissue Fabrication. Mater Today, Biomed Eng, 40:363–408.
7:30–40. https://doi.org/10.1615/critrevbiomedeng. v40. i5.10
https://doi.org/10.1016/S1369-7021(04)00233-0 132. Rezwan K, Chen QZ, Blaker JJ, et al., 2006, Biodegradable
121. Zhang YS, Yue K, Aleman J, et al., 2017, 3D Bioprinting for and Bioactive Porous Polymer/Inorganic Composite Scaffolds
Tissue and Organ Fabrication. Ann Biomed Eng, 45:148–63. for Bone Tissue Engineering. Biomaterials, 27:3413–31.
https://doi.org/10.1007/s10439-016-1612-8 https://doi.org/10.1016/j. biomaterials.2006.01.039
122. Yeo MG, Lee JS, Chun W, et al., 2016, An Innovative Collagen- 133. Asadi N, Alizadeh E, Salehi R, et al., 2017, Nanocomposite
Based Cell-Printing Method for Obtaining Human Adipose Hydrogels for Cartilage Tissue Engineering: A Review. Artif
Stem Cell-Laden Structures Consisting of Core-Sheath Cells Nanomed Biotechnol, 46:465–71.
Structures for Tissue Engineering. Biomacromolecules, https://doi.org/10.1080/21691401.2017.1345924
17:1365–75. 134. Chen J, Yang J, Wang L, et al., 2021, Modified Hyaluronic
https://doi.org/10.1021/acs.biomac.5b01764 Acid Hydrogels with Chemical Groups that Facilitate
123. Yeo MG, Ha JH, Lee HJ, et al., 2016, Fabrication of hASCs- Adhesion to Host Tissues Enhance Cartilage Regeneration.
laden Structures Using Extrusion-based Cell Printing Bioact Mater, 6:1689–98.
Supplemented with an Electric Field. Acta Biomater, 38:33–43. https://doi.org/10.1016/j.bioactmat.2020.11.020
https://doi.org/10.1016/j.actbio.2016.04.017 135. Sun Y, You Y, Jiang W, et al., 2020, 3D Bioprinting Dual-
124. Xu T, Gregory CA, Molnar P, et al., 2006, Viability and factor Releasing and Gradient-structured Constructs Ready
Electrophysiology of Neural Cell Structures Generated by the to Implant for Anisotropic Cartilage Regeneration. Sci Adv,
Inkjet Printing Method. Biomaterials, 27:3580–8. 6:eaay1422.
https://doi.org/10.1016/j.biomaterials.2006.01.048 https://doi.org/10.1126/sciadv. aay 1422
125. Xu F, Finley TD, Turkaydin M, et al., 2011, The Assembly 136. Diloksumpan P, Castilho M, Gbureck U, et al., 2020,
of Cell-encapsulating Microscale Hydrogels Using Acoustic Combining Multi-Scale 3D Printing Technologies to Engineer
Waves. Biomaterials, 32:7847–55. Reinforced Hydrogel-ceramic Interfaces. Biofabrication,
https://doi.org/10.1016/j.biomaterials.2011.07.010 12:025014.
126. Koo Y W, Kim GH, 2016, New Strategy for Enhancing In https://doi.org/10.1088/1758-5090/ab69d9
Situ Cell Viability of Cell-printing Process Via Piezoelectric 137. Kim SH, Yeon YK, Lee JM, et al., 2018, Precisely Printable
Transducer-assisted Three-Dimensional Printing. and Biocompatible Silk Fibroin Bioink for Digital Light
Biofabrication, 8:025010. Processing 3D Printing. Nat Commun, 9:1620.
https://doi.org/10.1088/1758-5090/8/2/025010 https://doi.org/10.1038/s41467-018-03759-y

62 International Journal of Bioprinting (2021)–Volume 7, Issue 4