Page 167 - IJB-9-1

International Journal of Bioprinting Bio-inks for 3D printing cell microenvironment

fabricated by two-photon polymerization. Appl Surf Sci, 416: 101. Alam K, Umer J, Iqbal M, et al., 2020, Measurements of
273–280. elastic properties of biological hydrogels using atomic force
microscopy. J Phys Conf Series, 1455(1): 12012.
98. DeKosky BJ, Dormer NH, Ingavle GC, et al., 2010,
Hierarchically designed agarose and poly(ethylene 102. Yin J, Yan M, Wang Y, et al., 2018, 3D bioprinting of low-
glycol) interpenetrating network hydrogels for cartilage concentration cell-laden gelatin methacrylate (GelMA)
tissue engineering. Tissue Eng Part C Methods, 16(6): bioinks with a two-step cross-linking strategy. ACS Appl
1533–1542. Mater Interfaces, 10(8): 6849–6857.
99. Lanasa SM, Hoffecker IT, Bryant SJ, 2011, Presence 103. West ER, Xu M, Woodruff TK, et al., 2007, Physical
of pores and hydrogel composition influence tensile properties of alginate hydrogels and their effects on in vitro
properties of scaffolds fabricated from well-defined follicle development. Biomaterials, 28(30): 4439–4448.
sphere templates. J Biomed Mater Res Part B Appl Bio 104. Alcaraz J, Mori H, Ghajar CM, et al., 2011, Collective
Mater, 96(2): 294–302.
epithelial cell invasion overcomes mechanical barriers of
100. Gunn JW, Turner SD, Mann BK, 2005, Adhesive and collagenous extracellular matrix by a narrow tube-like
mechanical properties of hydrogels influence neurite geometry and MMP14-dependent local softening. Integr
extension. J Biomed Mater Res Part A, 72(1): 91–97. Biol, 3(12): 1153–1166.

Volume 9 Issue 1 (2023) 159 https://doi.org/10.18063/ijb.v9i1.632