Page 203 - IJB-9-1

International Journal of Bioprinting 3D bioprinting of tissue with carbon nanomaterials

13. Binder KW, Zhao W, Aboushwareb T, et al., 2010, In situ 30. Mironov V, Boland T, Trusk T, et al., 2003, Organ printing:
bioprinting of the skin for burns. J Am Coll Surg, 211:S76. Computer-aided jet-based 3D tissue engineering. Trends
Biotechnol, 21:157–161.
14. Ozbolat IT, Hospodiuk M, 2016, Current advances and future
perspectives in extrusion-based bioprinting. Biomaterials, 31. Shafiee A, Atala A, 2016, Printing technologies for medical
76:321–343. applications. Trends Mol Med, 22:254–265.
15. Koch L, Gruene M, Unger C, et al., 2013, Laser assisted cell 32. Fielding GA, Bandyopadhyay A, Bose S, 2012, Effects of
printing. Curr Pharm Biotechnol, 14:91–97. silica and zinc oxide doping on mechanical and biological
properties of 3D printed tricalcium phosphate tissue
16. Guillemot F, Souquet A, Catros S, et al., 2010, Laser-assisted
cell printing: Principle, physical parameters versus cell fate and engineering scaffolds. Dent Mater, 28:113–122.
perspectives in tissue engineering. Nanomedicine, 5:507–515. 33. Ahmed M, Vadivelu R, John J, et al., 2016, Three-dimensional
printing of biological matters. J Sci Adv Mater Devices, 1:1–17.
17. Koch L, Kuhn S, Sorg H, et al., 2010, Laser printing of skin
cells and human stem cells. Tissue Eng Part C Methods, 34. Li Q, Zhang B, Xue Q, et al., 2021, A systematic thermal
16:847–854. analysis for accurately predicting the extrusion printability of
alginate–gelatin-based hydrogel bioinks. Int J Bioprint, 7:394.
18. Serra P, Duocastella M, Fernández-Pradas JM, et al., 2009,
Liquids microprinting through laser-induced forward 35. Matai I, Kaur G, Seyedsalehi A, et al., 2020, Progress in
transfer. Appl Surf Sci, 255:5342–5345. 3D bioprinting technology for tissue/organ regenerative
19. Patrascioiu A, Fernández-Pradas JM, Palla-Papavlu A, et al., engineering. Biomaterials, 226:119536.
2014, Laser-generated liquid microjets: Correlation between 36. Liu W, Zhang YS, Heinrich MA, et al., 2017, Rapid
bubble dynamics and liquid ejection. Microfluid Nanofluid, continuous Multimaterial mxtrusion bioprinting. Adv
16:55–63. Mater, 29:1604630.
20. Pan Y, Zeng L, 2019, Simulation and validation of droplet 37. Kreimendahl F, Köpf M, Thiebes AL, et al., 2017, Three-
generation process for revealing three design constraints in dimensional printing and angiogenesis: Tailored agarose-
electrohydrodynamic jet printing. Micromachines, 10:94. type I collagen blends comprise three-dimensional
21. Mkhize N, Bhaskaran H, 2022, Electrohydrodynamic jet printability and angiogenesis potential for tissue-engineered
printing: Introductory concepts and considerations. Small substitutes. Tissue Eng Part C Methods, 23:604–615.
Sci, 2:2100073. 38. Noh I, Kim N, Tran HN, et al., 2019, 3D Printable hyaluronic
22. Lei Q, He J, Li D, 2019, Electrohydrodynamic 3D printing of acid-based hydrogel for its potential application as a bioink
layer-specifically oriented, multiscale conductive scaffolds in tissue engineering. Biomat Res, 23:3.
for cardiac tissue engineering. Nanoscale, 11:15195–15205. 39. Pereira RF, Sousa A, Barrias CC, et al., 2018, A single-
23. Jeong HJ, Nam H, Jang J, et al., 2020, 3D bioprinting component hydrogel bioink for bioprinting of bioengineered
strategies for the regeneration of functional tubular tissues 3D constructs for dermal tissue engineering. Mater Horiz,
and organs. Bioengineering, 7:32. 5:1100–1111.
24. Dhariwala B, Hunt E, Boland T, 2004, Rapid prototyping of 40. Ashammakhi N, Ahadian S, Xu C, et al., 2019, Bioinks
tissue-engineering constructs, using photopolymerizable and bioprinting technologies to make heterogeneous and
hydrogels and stereolithography. Tissue Eng, 10:1316–1322. biomimetic tissue constructs. Mater Today Bio, 1:100008.
25. Melchels FPW, Feijen J, Grijpma DW, 2010, A review 41. Suntornnond R, Tan EYS, An J, et al., 2017, A highly
on stereolithography and its applications in biomedical printable and biocompatible hydrogel composite for direct
engineering. Biomaterials, 31:6121–6130. printing of soft and perfusable vasculature-like structures.
Sci Rep, 7:16902.
26. Lopez de Armentia S, Fernández-Villamarín S, Ballesteros Y,
et al., 2022, 3D printing of a graphene-modified photopolymer 42. Cernencu AI, Lungu A, Dragusin DM, et al., 2021, 3D
using stereolithography for biomedical applications: A study bioprinting of biosynthetic nanocellulose-filled GelMA inks
of the polymerization reaction. Int J Bioprint, 8:503. highly reliable for soft tissue-oriented constructs. Materials,
14:4891.
27. Heinrich MA, Liu W, Jimenez A, et al., 2019, 3D bioprinting:
From benches to translational applications. Small, 15:e1805510. 43. Pereira RF, Bártolo PJ, 2015, 3D bioprinting of
photocrosslinkable hydrogel constructs. J Appl Polym Sci,
28. Moura D, Pereira RF, Gonçalves IC, 2022, Recent advances 132:42458.
on bioprinting of hydrogels containing carbon materials.
Mater Today Chem, 23:100617. 44. Escobar-Chávez JJ, López-Cervantes M, Naïk A, et al., 2006,
Applications of thermo-reversible pluronic F-127 gels in
29. Seo JW, Kim GM, Choi Y, et al., 2022, Improving printability pharmaceutical formulations. J Pharm Sci, 9:339–358.
of digital-light-processing 3D bioprinting via photoabsorber
pigment adjustment. Int J Mol Sci, 23:5428. 45. Setayeshmehr M, Hafeez S, van Blitterswijk C, et al., 2021,
Bioprinting via a dual-gel bioink based on poly(vinyl

Volume 9 Issue 1 (2023) 195 https://doi.org/10.18063/ijb.v9i1.635