Page 147 - IJB-9-2

International Journal of Bioprinting Hybrid biofabrication of neurosecretory structures

of the First Affiliated Hospital of Anhui Medical University https://doi.org/10.18063/ijb.v8i1.424
(PJ2020-12-07). This study was conducted in accordance 10. Ng WL, Lee JM, Zhou M, et al., 2020, Vat polymerization-
with the Declaration of Helsinki (as revised in 2013). based bioprinting-process, materials, applications and
regulatory challenges. Biofabrication, 12: 022001.
Consent for publication
https://doi.org/10.1088/1758-5090/ab6034
Not applicable.
11. Li W, Mille LS, Robledo JA, et al., 2020, Recent advances
Availability of data in formulating and processing biomaterial inks for vat
polymerization-based 3d printing. Adv Healthc Mater, 9:
Not applicable. e2000156.

References 12. Fonseca AC, Melchels FP, Ferreira MJ, et al., 2020, Emulating
human tissues and organs: A bioprinting perspective toward
1. Yoo ES, Yu J, Sohn JW, 2021, Neuroendocrine control of personalized medicine. Chem Rev, 120: 11128–11174. doi:
appetite and metabolism. Exp Mol Med, 53: 505–516. 10.1021/acs.chemrev.0c00342
https://doi.org/10.1038/s12276-021-00597-9 13. Jain P, Kathuria H, Dubey N, et al., 2022, Advances in 3D
2. Téblick A, Gunst J, Langouche L, et al., 2022, Novel insights bioprinting of tissues/organs for regenerative medicine and
in endocrine and metabolic pathways in sepsis and gaps for in-vitro models. Biomaterials, 287:121639.
future research. Clin Sci (Lond), 136: 861–878. https://doi.org/10.1016/j.biomaterials.2022.121639
https://doi.org/10.1042/CS20211003 14. Cuvellier M, Rose S, Ezan F, et al., 2022, In vitro long term
3. Garrahy A, Sherlock M, Thompson CJ, 2017, Management differentiation and functionality of three-dimensional
of endocrine disease: Neuroendocrine surveillance and bioprinted primary human hepatocytes: Application for in
management of neurosurgical patients. Eur J Endocrinol, vivo engraftment. Biofabrication, 14:035021
176: R217–R233. https://doi.org/10.1088/1758-5090/ac7825
https://doi.org/10.1530/EJE-16-0962 15. Bernal PN, Bouwmeester M, Madrid-Wolff J, et al., 2022,
4. Schwerdtfeger LA, Tobet SA, 2019, From organotypic Volumetric bioprinting of organoids and optically tuned
culture to body-on-a-chip: A neuroendocrine perspective. hydrogels to build liver-like metabolic biofactories. Adv
J Neuroendocrinol, 31: e12650. Mater, 34(15):e2110054.
https://doi.org/10.1111/jne.12650 https://doi.org/10.1002/adma.202110054
5. Jo Y, Hwang DG, Kim M, et al., 2022, Bioprinting-assisted 16. Ma L, Wu Y, Li Y, et al., 2020, Current advances on 3D-bioprinted
tissue assembly to generate organ substitutes at scale. Trends liver tissue models. Adv Healthc Mater, 9: e2001517.
Biotechnol, S0167–7799(22)00170-6. https://doi.org/10.1002/adhm.202001517
https://doi.org/10.1016/j.tibtech.2022.07.001 17. Lawlor KT, Vanslambrouck JM, Higgins JW, et al., 2021,
6. Jiang T, Munguia-Lopez JG, Flores-Torres S, et al., 2019, Cellular extrusion bioprinting improves kidney organoid
Extrusion bioprinting of soft materials: An emerging reproducibility and conformation. Nat Mater, 20(2):260–271.
technique for biological model fabrication. Appl Phys Rev, https://doi.org/10.1038/s41563-020-00853-9
6: 011310.
18. Ahrens JH, Uzel SG, Skylar-Scott M, et al., 2022,
https://doi.org/10.1063/1.5059393 Programming cellular alignment in engineered cardiac
7. Zhuang P, Ng WL, An J, et al., 2019, Layer-by-layer tissue via bioprinting anisotropic organ building blocks. Adv
ultraviolet assisted extrusion-based (UAE) bioprinting of Mater, 34: e2200217.
hydrogel constructs with high aspect ratio for soft tissue https://doi.org/10.1002/dma.202200217
engineering applications. PLoS One, 14: e0216776.
19. Li YE, Jodat YA, Samanipour R, et al., 2020, Toward a
https://doi.org/10.1371/journal.pone.0216776 neurospheroid niche model: Optimizing embedded 3D
8. Li X, Liu B, Pei B, et al., 2020, Inkjet bioprinting of bioprinting for fabrication of neurospheroid brain-like
biomaterials. Chem Rev, 120: 10793–10833. co-culture constructs. Biofabrication, 13: 015014.
https://doi.org/10.1021/acs.chemrev.0c00008 https://doi/.org/10.1088/1758-5090/abc1be
9. Ng WL, Huang X, Shkolnikov V, et al., 2021, Controlling 20. Bolívar-Monsalve EJ, Ceballos-González CF, Chávez-
droplet impact velocity and droplet volume: Key factors to Madero C, et al., 2022, One-Step bioprinting of multi-
achieving high cell viability in sub-nanoliter droplet-based channel hydrogel filaments using chaotic advection:
bioprinting. Int J Bioprint, 8: 424. Fabrication of pre-vascularized muscle-like tissues. Adv

Volume 9 Issue 2 (2023) 139 https://doi.org/10.18063/ijb.v9i2.659