Page 139 - IJB-9-3

International Journal of Bioprinting Programmable formaldehyde dehydrogenase for biodegradation formaldehyde

39. Hua HH, 2007, Study on determination of formaldehyde cellulose using response surface methodology. Appl Biochem
in mushroom and aquatic products by acetyl-acetone Biotech, 193(7):2043–2060.
spectrophotometric method. Food Sci, 28(4):273–276.
44. Hua S, Ma H, Li X, et al., 2010, pH-sensitive sodium
40. Mueller JM, Dos Santos RL, Brigido RV, 2011, Alginate alginate/poly (vinyl alcohol) hydrogel beads prepared by
production by microorganisms. Polimeros, 21(4):305–310. combined Ca crosslinking and freeze-thawing cycles for
2+
controlled release of diclofenac sodium. Int J Biol Macromol,
41. Lou CW, Lee MC, Chen CK, et al., 2016, Effects of the
addition of sodium alginate and the concentration of 46(5):517–523.
calcium chloride on the properties of composite nonwoven 45. Deng W, Tang Y, Mao J, et al., 2021, Cellulose nanofibril
fabrics. MATEC Web Conf, 67:1–7. as a crosslinker to reinforce the sodium alginate/chitosan
hydrogels. Int J Biol Macromol, 189:890–899.
42. Silva V, Khatib W, Fleming PJ, 2006, Nonlinear control
system design using variable complexity modelling and 46. Zhao G, 2021, Performance study of grass-derived nano-
multiobjective optimization. Sba Control Autom Soc Brasilra cellulose and polycaprolactone composites for 3D printing.
Automat, 17(1):24–31. Appl Sci (Basel), 11(3):1–16.
43. Guo R, Zheng X, Wang Y, et al., 2021, Optimization of 47. Zhou X, Liu C, 2017, Three-dimensional printing for
cellulase immobilization with sodium alginate-polyethylene catalytic applications: Current status and perspectives. Adv
for enhancement of enzymatic hydrolysis of microcrystalline Funct Mater, 27:1–13.

Volume 9 Issue 3 (2023) 131 https://doi.org/10.18063/ijb.695