Page 262 - IJB-9-3

International Journal of Bioprinting Multi-material bioprinting with OCT imaging

Availability of data 10. Tao J, Jose GM, Salvador FT, et al., 2019, Extrusion
bioprinting of soft materials: An emerging technique for
Data underlying the results presented in this paper are not biological model fabrication. Appl Phys Rev, 6(1):011310.
publicly available at this time but may be obtained from the
authors upon reasonable request. https://doi.org/10.1063/1.5053909
11. Li XD, Liu BX, Ben P, et al., 2020, Inkjet bioprinting of
References biomaterials. Chem Rev, 120(19):10596–10636.
https://doi.org/10.1021/acs.chemrev.0c00008
1. Wang W, Zhang B, Li M, et al., 2021, 3D printing of PLA/
n-HA composite scaffolds with customized mechanical 12. Wei LN, Jia ML, Zhou M, et al., 2020, Vat polymerization-
properties and biological functions for bone tissue based bioprinting—Process, materials, applications and
engineering. Compos Part B-Eng, 224:09192. regulatory challenges. Biofabrication, 12(2):022001.
https://doi.org/10.1016/j.compositesb.2021.109192 https://doi.org/10.1088/1758-5090/ab6034
2. Daulbayev C, Mansurov Z, Sultanov F, et al., 2020, A 13. Zhang B, Huang J, Narayan RJ, 2020, Gradient scaffolds for
numerical study of fluid flow in the porous structure osteochondral tissue engineering and regeneration. J Mater
of biological scaffolds. Eurasian Chem-Technol J, 22(3): Chem B, 8:8149.
149–156. https://doi.org/10.1039/D0TB00688B

https://doi.org/ 10.18321/ectj974 14. Wang XY, Zhang M, Ma JG, et al., 2020, 3D printing of cell-
container-like scaffolds for multicell tissue engineering—
3. He J, Mao M, Li X, et al., 2021, Bioprinting of 3D functional
tissue constructs. Int J Bioprint, 7(3):395. ScienceDirect. Engineering, 6(11):1276–1284.
https://doi.org/10.1016/j.eng.2020.08.001
https://doi.org/10.18063/ijb.v7i3.395
15. Sodupe-Ortega E, Sanz-Garcia A, Pernia-Espinoza A, et al.,
4. Wei LN, Chee KC, Shen YF, 2019, Print me an organ! Why 2018, Accurate calibration in multi-material 3D bioprinting
we are not there yet. Progr Polym Sci, 97:101145.
for tissue engineering. Materials, 11(8):1402.
https://doi.org/10.1016/j.progpolymsci.2019.101145 https://doi.org/10.3390/ma11081402
5. Ashammakhi N, Ahadian S, Xu C, et al., 2019, Bioinks 16. Naghavi SA, Wang H, Varma SN, et al., 2022, On the
and bioprinting technologies to make heterogeneous and morphological deviation in additive manufacturing of
biomimetic tissue constructs—ScienceDirect. Mater Today porous Ti6Al4V scaffold: A design consideration. Materials,
Bio, 1(C):100008. 15(14):4729.
https://doi.org/10.1016/j.mtbio.2019.100008 https://doi.org/10.3390/ma15144729
6. Zhang Y, Wang B, Hu J, et al., 2021, 3D composite bioprinting 17. Suwanprateeb J, Thammarakcharoen F, Wasoontararat
for fabrication of artificial biological tissues. Int J Bioprint, K, et al., 2012, Influence of printing parameters on the
7(1):299. transformation efficiency of 3D‐printed plaster of paris
https://doi.org/10.18063/ijb.v7i1.299 to hydroxyapatite and its properties. Rapid Prototyp J,
18(6):490–499.
7. Wan LL, Luis SM, Juan A, et al., 2020, Recent advances
in formulating and processing biomaterial inks for vat https://doi.org/10.1108/13552541211272036
polymerization-based 3D printing. Adv Healthc Mater, 18. Zhang B, Cristescu R, Chrisey DB, et al., 2020, Solvent-
2000156:1–18. based extrusion 3D printing for the fabrication of tissue
https://doi.org/10.1002/adhm.202000156 engineering scaffolds. Int J Bioprint, 6(1):19.

8. Ng WL, Huang X, Shkolnikov V, et al., 2022, Controlling https://doi.org/10.18063/ijb.v6i1.211
droplet impact velocity and droplet volume: Key factors to 19. Tao Y, Li P, Pan L, 2019, Improving tensile properties of
achieving high cell viability in sub-nanoliter droplet-based polylactic acid parts by adjusting printing parameters of
bioprinting. Int J Bioprint, 8(1):424. open source 3D printers. Mater Sci, 26(1):83–87.
https://doi.org/10.18063/ijb. v8i1.424 https://doi.org/10.5755/j01.ms.26.1.20952
9. Zhuang P, Ng WL, An J, et al., 2019, Layer-by-layer 20. Mao M, Liang H, He J, et al., 2021, Coaxial
ultraviolet assisted extrusion-based (UAE) bioprinting of electrohydrodynamic bioprinting of pre-vascularized
hydrogel constructs with high aspect ratio for soft tissue cell-laden constructs for tissue engineering. Int J Bioprint,
engineering applications. PLoS One, 14(6):e0216776. 7(3):362.
https://doi.org/10.1371/journal.pone.0216776 https://doi.org/10.18063/ijb.v7i3.362

Volume 9 Issue 3 (2023) 254 https://doi.org/10.18063/ijb.707