Page 6 - MSAM-1-2

June 2022 ǀ Volume 1 ǀ Issue 2 ǀ

Materials Science in Additive Manufacturing

https://msam.whioce.com/index.php/MSAM/index

CONTENTS

1 Flexural behavior of 3D printed bio-inspired interlocking suture ORIGINAL RESEARCH
structures ARTICLE
Sachini Wickramasinghe, Truong Do, Phuong Tran

http://doi.org/10.18063/msam.v1i2.9

2 Influence of powder morphology on laser absorption behavior and ORIGINAL RESEARCH
printability of nanoparticle-coated 90W-Ni-Fe powder during laser ARTICLE
powder bed fusion
Jingjia Sun, Meng Guo, Keyu Shi, Dongdong Gu

https://doi.org/10.18063/msam.v1i2.11

3 Multi-objective optimization of intense pulsed light sintering process ORIGINAL RESEARCH
for aerosol jet printed thin film ARTICLE
Guo Liang Goh, Haining Zhang, Guo Dong Goh, Wai Yee Yeong, Tzyy Haur Chong

https://doi.org/10.18063/msam.v1i2.10

4 Process study for directed energy deposition of 316L stainless steel ORIGINAL RESEARCH
with TiB2 metal matrix composites ARTICLE
Yao Ting Ang, Swee Leong Sing, Joel Choon Wee Lim

https://doi.org/10.18063/msam.v1i2.13

5 Cold spray additive manufacturing of copper-based materials: Review REVIEW ARTICLE
and future directions
Vineeth Menon, Clodualdo Aranas Jr., Gobinda Saha

https://doi.org/10.18063/msam.v1i2.12

iv