Page 21 - MSAM-2-3

Materials Science in Additive Manufacturing High-performance materials in AM

42. Romedenne M, Pillai R, Kirka M, et al., 2020, High photopolymerization technology: Materials, applications,
temperature air oxidation behavior of Hastelloy X processed challenges, and future trends of 3D printing. Polymers
by electron beam melting (EBM) and selective laser melting (Basel), 13: 598.
(SLM). Corros Sci, 171: 108647.
https://doi.org/10.3390/polym13040598
https://doi.org/10.1016/j.corsci.2020.108647
53. Maines EM, Porwal MK, Ellison CJ, et al., 2021, Sustainable
43. Bhavar V, Kattire P, Patil V, et al., 2014, A Review on Powder advances in SLA/DLP 3D printing materials and processes.
Bed Fusion Technology of Metal Additive Manufacturing. Green Chem, 23: 6863–6897.
Boca Raton: CRC Press.
https://doi.org/10.1039/D1GC01489G
44. Zhao X, Li S, Zhang M, et al., 2016, Comparison of the 54. Tai XY, Zhakeyev A, Wang H, et al., 2019, Accelerating fuel
microstructures and mechanical properties of Ti-6Al-4V cell development with additive manufacturing technologies:
fabricated by selective laser melting and electron beam State of the art, opportunities and challenges. Fuel Cells,
melting. Mater Des, 95: 21–31.
19: 636–650.
https://doi.org/10.1016/j.matdes.2015.12.135
https://doi.org/10.1002/fuce.201900164
45. Monti C, Turani M, Papis K, et al., 2023, A new Al-Cu alloy 55. Sampson KL, Deore B, Go A, et al., 2021, Multimaterial vat
for LPBF developed via ultrasonic atomization. Mater Des, polymerization additive manufacturing. ACS Appl Polym
229: 111907.
Mater, 3: 4304–4324.
https://doi.org/10.1016/j.matdes.2023.111907
https://doi.org/10.1021/acsapm.1c00262
46. Xiao F, Shu D, Wang D, et al., 2023, Effect of Zn content on
the formability and aging precipitation of Al-Zn-Mg-Cu-Nb 56. Zhang F, Zhu L, Li Z, et al., 2021, The recent development of
vat photopolymerization: A review. Addit Manuf, 48: 102423.
alloys prepared by LPBF. J Mater Res Technol, 25: 6338–6355.
https://doi.org/10.1016/j.addma.2021.102423
https://doi.org/10.1016/j.jmrt.2023.07.057
57. Ng WL, Lee JM, Zhou M, et al., 2020, Vat polymerization-
47. Pilipović A, 2022, Chapter 11-sheet lamination. In: Izdebska-
Podsiadły J, editor. Polymers for 3D Printing, Plastics based bioprinting-process, materials, applications and
Design Library. Norwich, NY: William Andrew Publishing. regulatory challenges. Biofabrication, 12: 022001.
p. 127–136. https://doi.org/10.1088/1758-5090/ab6034
https://doi.org/10.1016/B978-0-12-818311-3.00008-2 58. Milton LA, Viglione MS, Ong LJ, et al., 2023, Vat
photopolymerization 3D printed microfluidic devices for
48. Gibson I, Rosen DW, Stucker B, 2010, Sheet lamination
processes. In: Additive Manufacturing Technologies: Rapid organ-on-a-chip applications. Lab Chip, 23: 3537–3560.
Prototyping to Direct Digital Manufacturing. Boston, MA: https://doi.org/10.1039/D3LC00094J
Springer US. p. 223–252. 59. Bucciarelli A, Paolelli X, De Vitis E, et al., 2022, VAT
https://doi.org/10.1007/978-1-4419-1120-9_8 photopolymerization 3D printing optimization of high
aspect ratio structures for additive manufacturing of chips
49. Gibson I, Rosen D, Stucker B, et al., 2021, Sheet lamination.
In: Khorasani M, editor. Additive Manufacturing towards biomedical applications. Addit Manuf, 60: 103200.
Technologies. Cham: Springer International Publishing. https://doi.org/10.1016/j.addma.2022.103200
p. 253–283. 60. Najeeb S, Zafar MS, Khurshid Z, et al., 2016, Applications
https://doi.org/10.1007/978-3-030-56127-7_9 of polyetheretherketone (PEEK) in oral implantology and
prosthodontics. J Prosthodont Res, 60: 12–19.
50. You X, Tan Y, Takeyama M, et al., 2023, Fabrication of a
turbine disk alloy by electron beam sheet lamination and https://doi.org/10.1016/j.jpor.2015.10.001
investigation on the improved high temperature creep 61. Zhang Z, Breidt C, Chang L, et al., 2004, Wear of PEEK
performance. J Mater Sci Technol, 143: 216–233.
composites related to their mechanical performances. Tribol
https://doi.org/10.1016/j.jmst.2022.10.013 Int, 37: 271–277.
51. Piedra-Cascón W, Krishnamurthy VR, Att W, et al., 2021, https://doi.org/10.1016/j.triboint.2003.09.005
3D printing parameters, supporting structures, slicing, and 62. Tariverdian T, Navaei T, Milan PB, et al., 2019,
post-processing procedures of vat-polymerization additive Chapter 16-functionalized polymers for tissue engineering
manufacturing technologies: A narrative review. J Dent, and regenerative medicines. In: Mozafari M, Chauhan NP,
109: 103630.
editors. Advanced Functional Polymers for Biomedical
https://doi.org/10.1016/j.jdent.2021.103630 Applications. Netherlands: Elsevier. p. 323–357.
52. Pagac M, Hajnys J, Ma QP, et al., 2021, A review of vat https://doi.org/10.1016/B978-0-12-816349-8.00016-3

Volume 2 Issue 3 (2023) 15 https://doi.org/10.36922/msam.1587