Page 59 - MSAM-3-1

Materials Science in Additive Manufacturing Adhesion study for multi-material 3D printing

doi: 10.1002/admt.202301426 styrene materials. Rapid Prototyp J. 2000;6(3):175-186.
20. Jiao J, Guo Y, Tong Q, et al. Stiffness-tunable and shape- doi: 10.1108/13552540010337056
locking soft actuators based on 3D-printed hybrid multi- 29. Brancewicz‑Steinmetz E, Valverde Vergara R, Buzalski V,
materials. Soft Sci. 2022;2(4):20. Sawicki J. Study of the adhesion between TPU and PLA
doi: 10.20517/ss.2022.19 in multi-material 3D printing. J Achiev Mater Manuf Eng.
2022;115(2):49-56.
21. Goh GL, Huang X, Toh W, et al. Joint angle prediction for
a cable-driven gripper with variable joint stiffness through 30. Yin J, Lu C, Fu J, Huang Y, Zheng Y. Interfacial bonding
numerical modeling and machine learning. Int J AI Mater during multi-material fused deposition modeling (FDM)
Des. 2024;1(1):2328. process due to inter-molecular diffusion. Mater Des.
2018;150:104-112.
doi: 10.36922/ijamd.2328
doi: 10.1016/j.matdes.2018.04.029
22. Awaja F, Gilbert M, Kelly G, Fox B, Pigram PJ. Adhesion of
polymers. Prog Polymer Sci. 2009;34(9):948-968. 31. Gao X, Qi S, Kuang X, Su Y, Li J, Wang D. Fused filament
fabrication of polymer materials: A review of interlayer
doi: 10.1016/j.progpolymsci.2009.04.007 bond. Addit Manuf. 2021;37:101658.
23. Kwon N, Deshpande H, Hasan MK, Darnal A, Kim J. Multi- doi: 10.1016/j.addma.2020.101658
ttach: Techniques to Enhance Multi-material Attachments
in Low-cost FDM 3D Printing. In: Presented at: Proceedings 32. Cunha P, Teixeira R, Carneiro O, Silva A. Multi-material
of the 6 Annual ACM Symposium on Computational fused filament fabrication: An expedited methodology to
th
Fabrication Virtual Event, USA; 2021. assess the affinity between different materials. Prog Addit
Manuf. 2023;8(2):195-204.
doi: 10.1145/3485114.3485116
doi: 10.1007/s40964-022-00322-6
24. Kakaraparthi S, Chen N. A multi-material additive
manufacturing virtual prototyping method for design to 33. Kalia K, Ameli A. Interfacial Bond Strength of Various Rigid/
improve part strength. Int J Adv Manuf Technol. 2023;127:1-12. Soft Multi-Materials Printed via Fused Filament Fabrication
Process. New York: American Society of Mechanical
doi: 10.1007/s00170-023-11660-2 Engineers; 2020.
25. Hasanov S, Gupta A, Nasirov A, Fidan I. Mechanical doi: 10.1115/SMASIS2020-2298
characterization of functionally graded materials produced
by the fused filament fabrication process. J Manuf Processes. 34. Vanaei HR, Raissi K, Deligant M, et al. Toward the
2020;58:923-935. understanding of temperature effect on bonding strength,
dimensions and geometry of 3D-printed parts. J Mater Sci.
doi: 10.1016/j.jmapro.2020.09.011 2020;55(29):14677-14689.

26. Mustafa I, Kwok TH. Interlacing infills for multi-material doi: 10.1007/s10853-020-05057-9
fused filament fabrication using layered depth material
images. Micromachines. 2022;13(5):773. 35. Srinivas V, van Hooy‑Corstjens CSJ, Rastogi S, Harings JAW.
Promotion of molecular diffusion and/or crystallization
doi: 10.3390/mi13050773 in fused deposition modeled poly(lactide) welds. Polymer.
27. Rendas P, Figueiredo L, Geraldo M, Vidal C, Soares BA. 2020;202:122637.
Improvement of tensile and flexural properties of 3D printed doi: 10.1016/j.polymer.2020.122637
PEEK through the increase of interfacial adhesion. J Manuf 36. Watschke H, Waalkes L, Schumacher C, Vietor T.
Processes. 2023;93:260-274.
Development of novel test specimens for characterization
doi: 10.1016/j.jmapro.2023.03.024 of multi-material parts manufactured by material extrusion.
Appl Sci. 2018;8(8):1220.
28. Rodriguez JF, Thomas JP, Renaud JE. Characterization of the
mesostructure of fused‐deposition acrylonitrile‐butadiene‐ doi: 10.3390/app8081220

Volume 3 Issue 1 (2024) 14 https://doi.org/10.36922/msam.2672