Page 50 - MSAM-3-3

Materials Science in Additive Manufacturing MEX optimization printing of rHPDE from milk jugs

Table 1. (Continued)
Material Result
ABS Detached from PB at the end of the print

Paper foam core Detached from PB at the end of the print

Note: Images taken at the end of the print or at the point when the print is detached from the part bed as indicated; Scale bars: 10 mm
Abbreviations: HDPE: High-density polyethylene; rHDPE: Recycled high-density polyethylene; ABS: Acrylonitrile butadiene styrene; PB: print bed.

Table 2. Test prints at various PBT and PT on smooth print surfaces

PBT (°C) PT (°C) Results
Observation Description
24 220 Detached from the print bed during printing
Image taken during printing.

230 Irremovable after print
Image taken after print.

(Contd...)

Volume 3 Issue 3 (2024) 7 doi: 10.36922/msam.4084