Page 134 - MSAM-4-3

Materials Science in Additive Manufacturing 3D-Printed hip joints performance

Polym J. 2015;47(9):585-597. PMMA-Based interim restorative material. Biomed Res Int.
doi: 10.1038/pj.2015.45 2022;2022:1743019.
9. Liqcreate. Digital Dentistry and Dental Resin 3D-Printing. doi: 10.1155/2022/1743019
Available from: https://www.liqcreate.com/supportarticles/ 13. Bukichev YS, Bogdanova LM, Lesnichaya VA, Chukanov NV,
digital-dentistry-and-dental-resin-3d-printing [Last Golubeva ND, Dzhardimalieva GI. Mechanical and
accessed on 2023 Aug 04]. thermophysical properties of epoxy nanocomposites with
10. Esun. Dental Resin. Available from: https://www.esun3d. titanium dioxide nanoparticles. Appl Sci. 2023;13(7):4488.
com/dental-resin/?gad_source=1&gclid=cj0kcqjwxeyxbh doi: 10.3390/app13074488
c7arisac7ds38iy-mpxesejk3hae1sh_yjox-m6bjfpr3ecyc6-
kqwdopvify0k1oaao7_ealw_wcb [Last accessed on 14. Sun J, Watson SS, Allsopp DA, Stanley D, Skrtic D. Tuning
2024 May 21]. photo-catalytic activities of TiO2 nanoparticles using
dimethacrylate resins. Dent Mater. 2016;32(3):363-372.
11. Da Costa RR, De Almeida FR, Da Silva AA, Domiciano SM,
Vieira AF. Design of a polymeric composite material femoral doi: 10.1016/j.dental.2015.11.021
stem for hip joint implant. Polímeros. 2019;29(4):354. 15. Hada T, Kanazawa M, Miyamoto N, et al. Effect of different
doi: 10.1590/0104-1428.02119 filler contents and printing directions on the mechanical
properties for photopolymer resins. Int J Mol Sci.
12. Alrahlah A, Khan R, Vohra F, et al. Influence of the
physical inclusion of ZRO2/TIO2 nanoparticles on 2022;23(4):2296.
physical, mechanical, and morphological characteristics of doi: 10.3390/ijms23042296

Volume 4 Issue 3 (2025) 10 doi: 10.36922/MSAM025200032