Page 72 - ESAM-1-2

Engineering Science in
Additive Manufacturing Multi-material additive manufacturing of metals

M. Fundamental investigation of the interface formation 155. Scaramuccia MG, Demir AG, Caprio L, Tassa O, Previtali B.
of multi-material additive manufactured 316L-CuSn10 Development of processing strategies for multigraded
structures. Metall Mater Trans A. 2025;56:2586-2603. selective laser melting of Ti6Al4V and IN718. Powder
Technol. 2020;367:376-389.
doi: 10.1007/s11661-025-07817-1
doi: 10.1016/j.powtec.2020.04.010
145. Chen J, Zhang M, Zhao D, Bi G, Bai Y, Xiao Y, Wang D.
The impact of interfacial characteristics on the interfacial 156. Onuike B, Bandyopadhyay A. Additive manufacturing of
properties of 316 L/CuSn10 multi-material manufactured Inconel 718 - Ti6Al4V bimetallic structures. Addit Manuf.
by laser powder bed fusion. Mater Characterization. 2018;22:844-851.
2024;211:113862.
157. Feenstra DR, Molotnikov A, Birbilis N. Effect of energy
doi: 10.1016/j.matchar.2024.113862 density on the interface evolution of stainless steel 316L
146. Sun Z, Tang C, Soh V, et al. Laser powder bed fusion of 316L deposited upon INC 625 via directed energy deposition.
stainless steel and K220 copper multi-material. Virtual Phys J Mater Sci. 2020;55(27):13314-13328.
Prototyp. 2024;19(1):e2356078. doi: 10.1007/s10853-020-04913-y
doi: 10.1080/17452759.2024.2356078 158. Gorunov AI. Investigation microstructure of carbon fibers
147. Dash A, Bandyopadhyay A. 17-4 PH and SS316L bimetallic reinforced composite on Fe and Ni-based obtained by laser
structures via additive manufacturing. Virtual Phys metal deposition. Surf Coat Technol. 2019;364:279-288.
Prototyp. 2024;19(1):e2292695. doi: 10.1016/j.surfcoat.2019.03.006
doi: 10.1080/17452759.2023.2292695 159. Duval-Chaneac MS, Gao N, Khan RHU, et al. Fatigue crack
148. Zhou Y, Duan L, Li F, Chen K, Wen S. Effect of heat treatment growth in IN718/316L multi-materials layered structures
on the microstructure and mechanical property of W/316L fabricated by laser powder bed fusion. Int J Fatigue.
multi-material fabricated by selective laser melting. J Alloys 2021;152:106454.
Compd. 2022;890:161841. doi: 10.1016/j.ijfatigue.2021.106454
doi: 10.1016/j.jallcom.2021.161841 160. Hinojos A, Mireles J, Reichardt A, et al. Joining of inconel 718
149. Wei C, Gu H, Gu Y, et al. Abnormal interfacial bonding and 316 stainless steel using electron beam melting additive
mechanisms of multi-material additive-manufactured manufacturing technology. Mater Design. 2016;94:17-27.
tungsten-stainless steel sandwich structure. Int J Extrem doi: 10.1016/j.matdes.2016.01.041
Manuf. 2022;4(2):025002.
161. Li Y, Liu Z, Wei Z, et al. Inhibition of interfacial cracks in
150. Obielodan J, Stucker B. Characterization of LENS-fabricated 304L-Inconel718 bimetal fabricated via laser powder bed
Ti6Al4V and Ti6Al4V/TiC dual-material transition joints. fusion. Addit Manuf. 2024;94:104463.
Int J Adv Manuf Technol. 2013;66(9-12):2053-2061.
doi: 10.1016/j.addma.2024.104463
doi: 10.1007/s00170-012-4481-9
162. Chang T, Fang X, Zhou Y, et al. Heterogeneous interfaces
151. Wei K, Zeng X, Li F, Liu M, Deng J. Microstructure and of aluminum bronze/Inconel 718 dissimilar alloys under
mechanical property of Ti-5Al-2.5Sn/Ti-6Al-4V dissimilar different wire arc directed energy deposition sequences. Int J
titanium alloys integrally fabricated by selective laser Extrem Manuf. 2025;7(1):015003.
melting. JOM. 2020;72(3):1031-1038.
doi: 10.1088/2631-7990/ad870f
doi: 10.1007/s11837-019-03988-6
163. Zhang L, Dong P, Zeng Y, Yao H, Chen J. Additive
152. Zhai W, Wang P, Ng FL, et al. Hybrid manufacturing of manufacturing of inconel 718/CuCrZr multi-metallic
γ-TiAl and Ti-6Al-4V bimetal component with enhanced materials fabricated by laser powder bed fusion. Addit
strength using electron beam melting. Compos Part B Eng. Manuf. 2024;92:104377.
2021;207:108587.
doi: 10.1016/j.addma.2024.104377
doi: 10.1016/j.compositesb.2020.108587
164. Prestes IB, Jägle EA. Influence of the laser strategy on
153. Wang P, Nai MLS, Lu S, Bai J, Zhang B, Wei J. Study of direct bi-metallic interfaces printed via multi-material laser-based
fabrication of a Ti-6Al-4V impeller on a wrought Ti-6Al-4V powder bed fusion. Addit Manuf Lett. 2025;13:100274.
plate by electron beam melting. JOM. 2017;69(12):2738-2744.
doi: 10.1016/j.addlet.2025.100274
doi: 10.1007/s11837-017-2610-5
165. Wei C, Zhao Z, Wang C, et al. Integrated laser additive
154. Onuike B, Bandyopadhyay A. Functional bimetallic joints of manufacturing of high-strength steel and Ti6Al4V:
Ti6Al4V to SS410. Addit Manuf. 2020;31:100931.
Experimental investigations and thermodynamic
doi: 10.1016/j.addma.2019.100931 calculations. J Alloys Compd. 2024;983:173902.

Volume 1 Issue 2 (2025) 40 doi: 10.36922/ESAM025180010