Page 71 - ESAM-1-2

Engineering Science in
Additive Manufacturing Multi-material additive manufacturing of metals

mechanical behavior of multilayer steel structures fabricated aluminum bronze/stainless steel hybrid parts - interfacial
by wire and arc additive manufacturing. Sci Technol Adv characterization, prospects, and problems. Materialia.
Mater. 2020;21(1):461-470. 2020;13:100834.
doi: 10.1080/14686996.2020.1788908 doi: 10.1016/j.mtla.2020.100834
125. McDonnell B, Errico V, Posa P, et al. Bi-metallic lattice 135. Ghanavati R, Naffakh-Moosavy H, Moradi M, et al. Design
structures manufactured via an intralayer multi-material optimization for defect-free AISI 316 L/IN718 functionally
powder bed fusion method. Addit Manufact. 2024;89:104301. graded materials produced by laser additive manufacturing.
Mater Characterization. 2025;220:114697.
doi: 10.1016/j.addma.2024.104301
doi: 10.1016/j.matchar.2024.114697
126. Bettencourt CJ, Kouraytem N. Microstructural
characterization of the transition in SS316L and IN625 136. Stair J, Webler BA, Beuth JL, De Boer MP. Demonstration
bimetallic fabricated using hybrid additive manufacturing. and analysis of conditions to obtain a high strength inconel
JOM. 2023;75(12):5079-5087. 625 to stainless steel 304l interface by directed energy
deposition. Metall Mater Trans A. 2024;55(7):2186-2199.
doi: 10.1007/s11837-023-06119-4
doi: 10.1007/s11661-024-07413-9
127. Ghanavati R, Naffakh-Moosavy H, Moradi M, Eshraghi M.
Printability and microstructure of directed energy deposited 137. Li L, Shi Q, Yang S. In-situ bonding of horizontal bimetallic
SS316l-IN718 multi-material: Numerical modeling and interface by laser offset during laser powder bed fusion of
experimental analysis. Sci Rep. 2022;12(1):16600. copper/nickel multi-material structures and underlying
thermodynamic mechanisms. J Mater Process Technol.
doi: 10.1038/s41598-022-21077-8
2025;339:118831.
128. Wei C, Li L, Zhang X, Chueh YH. 3D printing of multiple
metallic materials via modified selective laser melting. CIRP doi: 10.1016/j.jmatprotec.2025.118831
Ann. 2018;67(1):245-248. 138. Chen WY, Zhang X, Li M, Xu R, Zhao C, Sun T. Laser
powder bed fusion of inconel 718 on 316 stainless steel.
doi: 10.1016/j.cirp.2018.04.096
Addit Manuf. 2020;36:101500.
129. Bodner SC, Van De Vorst LT, Zalesak J, et al. Inconel-steel doi: 10.1016/j.addma.2020.101500
multilayers by liquid dispersed metal powder bed fusion:
Microstructure, residual stress and property gradients. 139. Meyer I, Oel M, Ehlers T, Lachmayer R. Additive
Addit Manufact. 2020;32:101027. manufacturing of multi-material parts - design guidelines
for manufacturing of 316L/CuCrZr in laser powder bed
doi: 10.1016/j.addma.2019.101027
fusion. Heliyon. 2023;9(8):e18301.
130. Yusuf SM, Zhao X, Yang S, Gao N. Interfacial characterisation doi: 10.1016/j.heliyon.2023.e18301
of multi-material 316L stainless steel/Inconel 718 fabricated
by laser powder bed fusion. Mater Lett. 2021;284:128928. 140. Bai Y, Zhang J, Zhao C, Li C, Wang H. Dual interfacial
characterization and property in multi-material selective
doi: 10.1016/j.matlet.2020.128928
laser melting of 316L stainless steel and C52400 copper
131. Mei X, Wang X, Peng Y, et al. Interfacial characterization alloy. Mater Characterization. 2020;167:110489.
and mechanical properties of 316L stainless steel/inconel doi: 10.1016/j.matchar.2020.110489
718 manufactured by selective laser melting. Mater Sci Eng
A. 2019;758:185-191. 141. Liu ZH, Zhang DQ, Sing SL, Chua CK, Loh LE. Interfacial
characterization of SLM parts in multi-material processing:
doi: 10.1016/j.msea.2019.05.011
Metallurgical diffusion between 316L stainless steel and
132. Chen N, Khan HA, Wan Z, et al. Microstructural C18400 copper alloy. Mater Characterization. 2014;94:116-125.
characteristics and crack formation in additively 142. Chen K, Wang C, Hong Q, Wen S, Zhou Y, Yan C, Shi Y.
manufactured bimetal material of 316L stainless steel and Selective laser melting 316L/CuSn10 multi-materials:
Inconel 625. Addit Manufact. 2020;32:101037.
Processing optimization, interfacial characterization
doi: 10.1016/j.addma.2020.101037 and mechanical property. J Mater Process Technol.
2020;283:116701.
133. Ahsan MRU, Fan X, Seo GJ, et al. Microstructures
and mechanical behavior of the bimetallic additively- 143. Meyer I, Messmann CO, Ehlers T, Lachmayer R. Additive
manufactured structure (BAMS) of austenitic stainless steel manufacturing of multi- material parts - effect of heat
and Inconel 625. J Mater Sci Technol. 2021;74:176-188. treatment on thermal, electrical, and mechanical part
properties of 316L/CuCrZr. Mater Design. 2025;252:113783.
doi: 10.1016/j.jmst.2020.10.001
doi: 10.1016/j.matdes.2025.113783
134. Dharmendra C, Shakerin S, Janaki Ram GD,
Mohammadi M. Wire-arc additive manufacturing of nickel 144. Bulloch A, Harris A, Groom A, Cruchley A, Tuck CJ, Simonelli

Volume 1 Issue 2 (2025) 39 doi: 10.36922/ESAM025180010