Page 76 - ESAM-1-2

Engineering Science in
Additive Manufacturing Multi-material additive manufacturing of metals

k-means algorithm. J Manuf Sci Eng. 2019;141(4):041011. heterogeneous materials. NPJ Comput Mater. 2024;10(1):50.
doi: 10.1115/1.4042786 doi: 10.1038/s41524-024-01234-5
229. Yang L, Lo L, Ding S, Özel T. Monitoring and detection of 237. Binder M, Anstaett C, Herzer F, et al. Potentials and
meltpool and spatter regions in laser powder bed fusion of Challenges of Multi-Material Processing by Laser-Based
super alloy Inconel 625. Prog Addit Manuf. 2020;5(4):367-378. Powder Bed Fusion. In: Solid Freeform Fabrication
doi: 10.1007/s40964-020-00140-8 Symposium; 2018.
230. Zhang Y, Hong GS, Ye D, Zhu K, Fuh JYH. Extraction and 238. Paul CP, Yadav SP, Rai AK, Narayanan JA, Bindra KS. Laser
evaluation of melt pool, plume and spatter information for directed energy deposition based additive manufacturing
powder-bed fusion AM process monitoring. Mater Design. of metallic multi-material: A review. J Metall Mater Sci.
2018;156:458-469. 2021;63:75-87.
doi: 10.1016/j.matdes.2018.07.002 doi: 10.1016/j.jmapro.2020.09.008
231. Nour YA, Gupta N. In-situ monitoring of sub-surface and 239. Sing SL, Huang S, Goh GD, et al. Emerging metallic systems
internal defects in additive manufacturing: A review. Mater for additive manufacturing: In-situ alloying and multi-metal
Design. 2022;222:111063. processing in laser powder bed fusion. Prog Mater Sci.
2021;119:100795.
doi: 10.1016/j.matdes.2022.111063
doi: 10.1016/j.pmatsci.2021.100795
232. Myers AJ, Quirarte G, Ogoke F, et al. High-resolution melt
pool thermal imaging for metals additive manufacturing 240. Mehrpouya M, Tuma D, Vaneker T, Afrasiabi M,
using the two-color method with a color camera. Addit Bambach M, Gibson I. Multimaterial powder bed fusion
Manuf. 2023;73:103663. techniques. Rapid Prototyp J. 2022;28(11):1-19.
doi: 10.1016/j.addma.2023.103663 doi: 10.1108/RPJ-01-2022-0014
233. Griffis JC, Shahed KS, Okwudire CE, Manogharan GP. 241. Dzogbewu TC, De Beer D. Powder bed fusion of
Process Modeling of Multi-Material Laser Powder Bed multimaterials. J Manuf Mater Process. 2023;7(1):15.
Fusion. In: Solid Freeform Fabrication Symposium 2023; doi: 10.3390/jmmp7010015
2023.
242. Nandhakumar R, Venkatesan K. A process parameters review
234. Küng VE, Scherr R, Markl M, Körner C. Multi-material on selective laser melting-based additive manufacturing
model for the simulation of powder bed fusion additive of single and multi-material: Microstructure, physical
manufacturing. Comput Mater Sci. 2021;194:110415. properties, tribological, and surface roughness. Mater Today
doi: 10.1016/j.commatsci.2021.110415 Commun. 2023;35:105538.
235. Auenhammer RM, Oddy C, Kim J, Mikkelsen LP. X-ray doi: 10.1016/j.mtcomm.2023.105538
scattering tensor tomography basedfinite element modelling. 243. Chen H, He Y, Dash SS, Zou Y. Additive manufacturing of
NPJ Comput Mater. 2023;10:50.
metals and alloys to achieve heterogeneous microstructures
doi: 10.24433/CO.6741464.V2 for exceptional mechanical properties. Mater Res Lett.
2024;12(3):149-171.
236. Auenhammer RM, Oddy C, Kim J, et al. XX-ray scattering
tensor tomography based finite element modelling of doi: 10.1080/21663831.2024.2305261

Volume 1 Issue 2 (2025) 44 doi: 10.36922/ESAM025180010