Page 78 - ESAM-1-2
P. 78

Engineering Science in
            Additive Manufacturing                                          Multi-material additive manufacturing of metals









                 Miscellaneous tests  a SS316/CuSn10 58■  a SS316/P21(C)  166●  a SS316/17-4PH  147●  a TiB/Ti-6Al-4V 188■  a IN718/Cu (TD) 47■  a IN718/SS316(F) 159■  a IN718/CF/SS 316  (WP) 158●  a NiTi/Ti-6Al-4V  (BS) 52■ a C300MS/AISI-304 (F) 170■ a C300MS/AISI-1045CS (F) 170■  a CuSn10/18Ni300 176■







                 Longitudinal flexural (=)  a SS316/CuSn10 58■  a, d SS316/CuSn10 142■  a Ti-6Al-4V/Nb/SS410 154●  a MS1/Cu 179■  d AlSi10Mg/C18400 175■









             Table A2. Summary of multi‑material additive manufacturing mechanical testing studies available in the literature
                 Bisecting flexural (||)                                      a C300MS/AISI-304 170■ a C300MS/AISI-1045CS 170■










                 Longitudinal tensile (=)  a SS316/CuSn10 58■  a,d SS316/CuSn10 142■  d SS316/C18400 141■  d SS316/W 148■    d AlSi10Mg/C18400 175■  a Al-12Si/Al-3.5Cu-1.5Mg-  1Si 172■  a Al5087/Al6060 173♦ Note: The build orientation of the specimens is superscripted (a–d) according to the printing type referenced in Figure 10. The superscripted symbol in each cell represents the additive  manufacturing process used in the fabrication of those materials. The symbol  ■  r










                 Bisecting tensile (||)  a SS316/IN625 133♦  a SS316/IN718 130■  a SS316/CuSn10 58■  a,d  SS316/CuSn10 142■  a SS316/CuSn10 187■  c,d Ti/Ti-6Al-4V 189■ a Ti5Al2.5Sn/Ti-6Al-4V 151■  a Ti-6Al-4V/Cu/SS316 123●  a CrMn/MS1 169■  a C300MS/AISI-304 170■ a C300MS/AISI-1045CS 170■  a MS1/Cu 179■  a CuSn10/18Ni300 176■ Abbreviations: BS: Bond shear; C: Compression test; F: Fatigue test; TD: Thermal diffusivity; WP: Wear performance.










                 Hardness/indentation  a SS316/IN625 129■  a SS316/IN625 132●  a SS316/IN625 157●  a SS316/IN625 126●  a SS316/IN625 133♦  a SS316/IN718 128■  a SS316/IN718 130■  a SS316/IN718 127● a SS316/CuSn10 128■   a SS316/  CuSn10 58■  a,d SS316/CuSn10 142■ a SS316/CuSn10 56■   a SS316/ CuSn10 187■ d SS316/C18400 141■   a SS316/C52400 140■   d SS316/W 148■  a SS316/P21 166●  a SS316/17-4PH  147●  a Ti-6Al-4V/IN718 155■  a TiB/Ti-6Al-4V 188■  c,d Ti/Ti-6Al-4V 189■ a








                 Base material  Stainless steel   alloy  Titanium alloy  Nickel alloy  Ferrous alloy  Aluminum   alloy  Copper alloy







            Volume 1 Issue 2 (2025)                         46                         doi: 10.36922/ESAM025180010
   73   74   75   76   77   78   79   80   81   82   83