Page 74 - ESAM-1-2

Engineering Science in
Additive Manufacturing Multi-material additive manufacturing of metals

186. Bergmann JP, Petzoldt F, Schürer R, Schneider S. Solid-state using wire-arc additive manufacturing. J Mater Processing
welding of aluminum to copper-case studies. Welding World. Technol. 2022;300:117396.
2013;57(4):541-550. doi: 10.1016/j.jmatprotec.2021.117396
187. Chen J, Yang Y, Song C, Wang D, Wu S, Zhang M. Influence 198. Iams AD, Lienert AJ, Otazu DA, Ramoni M. Effects of
mechanism of process parameters on the interfacial deposition sequence on microstructural evolution in
characterization of selective laser melting 316L/CuSn10. additively manufactured Cu-Cr-Nb alloy/superalloy
Mater Sci Eng A. 2020;792:139316.
bimetallic structures. Addit Manuf Lett. 2023;6:100151.
doi: 10.1016/j.msea.2020.139316
doi: 10.1016/j.addlet.2023.100151
188. Zhang J, Song B, Yang L, Liu R, Zhang L, Shi Y. Microstructure 199. Zhang J, Wang X, Gao J, et al. Additive manufacturing of
evolution and mechanical properties of TiB/Ti6Al4V Ti-6Al-4V/Al-Cu-Mg multi-material structures with a Cu
gradient-material lattice structure fabricated by laser interlayer. Int J Mech Sci. 2023;256:108477.
powder bed fusion. Composit Part B Eng. 2020;202:108417.
doi: 10.1016/j.ijmecsci.2023.108477
doi: 10.1016/j.compositesb.2020.108417
200. Wimmer A, Yalvac B, Zoeller C, et al. Experimental
189. Borisov E, Polozov I, Starikov K, Popovich A, Sufiiarov V. and numerical investigations of in situ alloying during
Structure and properties of Ti/Ti64 graded material powder bed fusion of metals using a laser beam. Metals.
manufactured by laser powder bed fusion. Materials (Basel). 2021;11(11):1842.
2021;14(20):6140.
doi: 10.3390/met11111842
doi: 10.3390/ma14206140
201. Patel KS, Solanki SD, Shah DB, Joshi SJ, Patel KM.
190. Demir AG, Previtali B. Multi-material selective laser melting Finite element simulation of additive manufacturing
of Fe/Al-12Si components. Manuf Lett. 2017;11:8-11.
process of carbon allotropes. Int J Interact Design Manuf.
doi: 10.1016/j.mfglet.2017.01.002 2023;18:6889-6896.
191. E04 Committee. Test Method for Microindentation doi: 10.1007/s12008-023-01221-y
Hardness of Materials. United States: ASTM.
202. Ali MH, Yerbolat G, Kurokawa S. Modeling and simulation
doi: 10.1520/E0384-22 of multi-materials for additive manufacturing. Int J Interact
Design Manuf. 2020;14(3):1057-1069.
192. Tan JL, Wong CH, Sorkin A. Multi-material modelling for
selective laser melting. Proced Eng. 2017;216:51-57. doi: 10.1007/s12008-020-00678-5
193. Zhang W, Zhang B, Xiao H, Yang H, Wang Y, Zhu H. A layer- 203. Griffis J, Masker A, Schreiber J, Manogharan G. Site-specific
dependent analytical model for printability assessment property informed interface design of multi-material laser
of additive manufacturing copper/steel multi-material powder bed fusion. In: Additive Manufacturing; Advanced
components by directed energy deposition. Micromachines Materials Manufacturing; Biomanufacturing; Life Cycle
(Basel). 2021;12(11):1394. Engineering. Vol. 1. Knoxville, Tennessee, USA: American
Society of Mechanical Engineers; 2024. p. V001T01A034.
doi: 10.3390/mi12111394
204. Giraldo-Londoño O, Mirabella L, Dalloro L, Paulino GH.
194. Li W, Kishore MN, Zhang R, et al. Comprehensive studies Multi-material thermomechanical topology optimization
of SS316L/IN718 functionally gradient material fabricated with applications to additive manufacturing: Design of main
with directed energy deposition: Multi- physics and multi- composite part and its support structure. Computer Methods
materials modelling and experimental validation. Addit Appl Mech Eng. 2020;363:112812.
Manuf. 2023;61:103358.
205. Zhang XS, Paulino GH, Ramos AS. Multi-material topology
195. Chen C, Gu D, Dai D, et al. Laser additive manufacturing of optimization with multiple volume constraints: A general
layered TiB2/Ti6Al4V multi-material parts: Understanding approach applied to ground structures with material
thermal behavior evolution. Optics Laser Technol. nonlinearity. Struct Multidiscip Optim. 2018;57(1):161-182.
2019;119:105666.
doi: 10.1007/s00158-017-1768-3
doi: 10.1016/j.optlastec.2019.105666
206. Sanders ED, Aguiló MA, Paulino GH. Multi-material
196. Kannan R, Lee Y, Pierce D, et al. Additive manufacturing as continuum topology optimization with arbitrary volume
a processing route for steel-aluminum bimetallic structures. and mass constraints. Comput Methods Appl Mech Eng.
Mater Design. 2023;231:112003.
2018;340:798-823.
doi: 10.1016/j.matdes.2023.112003
207. Horn M, Prestel L, Schmitt M, et al. Multi-material additive
197. Sridar S, Klecka MA, Xiong W. Interfacial characteristics manufacturing - recycling of binary metal powder mixtures
of P91 steel - inconel 740H bimetallic structure fabricated by screening. Procedia CIRP. 2020;93:50-55.

Volume 1 Issue 2 (2025) 42 doi: 10.36922/ESAM025180010