Page 28 - IJAMD-2-2

International Journal of AI for
Materials and Design AI-driven material development for AM

12. Pagac M, Hajnys J, Ma QP, et al. A review of vat 23. Singh R, Gupta A, Tripathi O, et al. Powder bed fusion
photopolymerization technology: Materials, applications, process in additive manufacturing: An overview. Mater
challenges, and future trends of 3D printing. Polymers. Today Proc. 2020;26:3058-3070.
2021;13(4):598. doi: 10.1016/j.matpr.2020.02.635
doi: 10.3390/polym13040598 24. Gharraei R, Bergstrom DJ, Chen X. Extrusion bioprinting
13. Gibson I, Rosen D, Stucker B, Khorasani M. Additive from a fluid mechanics perspective. Int J Bioprinting.
Manufacturing Technologies. Berlin: Springer International 2024;10(6):3973.
Publishing; 2021. doi: 10.36922/ijb.3973
doi: 10.1007/978-3-030-56127-7 25. Svetlizky D, Das M, Zheng B, et al. Directed energy
14. Elkaseer A, Chen KJ, Janhsen JC, Refle O, Hagenmeyer V, deposition (DED) additive manufacturing: Physical
Scholz SG. Material jetting for advanced applications: characteristics, defects, challenges and applications. Mater
A state-of-the-art review, gaps and future directions. Addit Today. 2021;49:271-295.
Manuf. 2022;60:103270. doi: 10.1016/j.mattod.2021.03.020
doi: 10.1016/j.addma.2022.103270 26. Kumar A, Dixit AR, Sreenivasa S. Mechanical properties
15. Chou WH, Gamboa A, Morales JO. Inkjet printing of of additively manufactured polymeric composites using
small molecules, biologics, and nanoparticles. Int J Pharm. sheet lamination technique and fused deposition modeling:
2021;600:120462. A review. Polym Adv Technol. 2024;35(4):e6396.
doi: 10.1016/j.ijpharm.2021.120462 doi: 10.1002/pat.6396
16. Gülcan O, Günaydın K, Tamer A. The state of the art 27. Tepylo N, Huang X, Patnaik PC. Laser‐based additive
of material jetting-a critical review. Polymers (Basel). manufacturing technologies for aerospace applications. Adv
2021;13(16):2829. Eng Mater. 2019;21(11):1900617.
doi: 10.3390/polym13162829 doi: 10.1002/adem.201900617
17. Sachs E, Cima M, Williams P, Brancazio D, Cornie J. Three 28. Hofstätter T, Pedersen DB, Tosello G, Hansen HN.
dimensional printing: Rapid tooling and prototypes directly State-of-the-art of fiber-reinforced polymers in additive
from a CAD model. J Eng Ind. 1992;114(4):481-488. manufacturing technologies. J Reinf Plast Compos.
2017;36(15):1061-1073.
doi: 10.1115/1.2900701
doi: 10.1177/0731684417695648
18. Naitoh M, Kubota Y, Katsumata A, Ohsaki C, Ariji E.
Dimensional accuracy of a binder jet model produced from 29. Kussmaul R, Biedermann M, Pappas GA, et al. Individualized
computerized tomography data for dental implants. J Oral lightweight structures for biomedical applications
Implantol. 2006;32(6):273-276. using additive manufacturing and carbon fiber patched
composites. Des Sci. 2019;5:e20.
doi: 10.1563/1548-1336(2006)32[273:DAOABJ]2.0.CO;2
30. Li Y, Feng Z, Huang L, et al. Additive manufacturing high
19. Deng C, Kang J, Shangguan H, Hu Y, Huang T, Liu Z. Effects performance graphene-based composites: A review. Compos
of hollow structures in sand mold manufactured using 3D Part Appl Sci Manuf. 2019;124:105483.
printing technology. J Mater Process Technol. 2018;255:516-523.
31. Wang B, Tao F, Fang X, Liu C, Liu Y, Freiheit T.
20. Holland S, Foster T, Tuck C. Creation of food structures Smart manufacturing and intelligent manufacturing:
through binder jetting. In: Fundamentals of 3D Food Printing A comparative review. Engineering. 2021;7(6):738-757.
and Applications. Elsevier; 2019. p. 257-288. Available
from: https://www.sciencedirect.com/science/article/pii/ 32. Xiao S, Li J, Wang Z, Chen Y, Tofighi S. Advancing additive
B9780128145647000092 [Last accessed on 2024 Dec 16]. manufacturing through machine learning techniques:
A state-of-the-art review. Future Internet. 2024;16:419.
21. Su J, Li Q, Teng J, et al. Programmable mechanical properties
of additively manufactured novel steel. Int J Extreme Manuf. 33. Dang L, He X, Tang D, Li Y, Wang T. A fatigue life prediction
approach for laser-directed energy deposition titanium
2025;7(1):015001.
alloys by using support vector regression based on pore-
doi: 10.1088/2631-7990/ad88bc induced failures. Int J Fatigue. 2022;159:106748.
22. Priyadarshini BM, Kok WK, Dikshit V, Feng S, Li KHH, 34. Ling J, Hutchinson M, Antono E, Paradiso S, Meredig B. High-
Zhang Y. 3D printing biocompatible materials with Multi dimensional materials and process optimization using data-
Jet Fusion for bioreactor applications. Int J Bioprinting. driven experimental design with well-calibrated uncertainty
2022;9(1):623. estimates. Integr Mater Manuf Innov. 2017;6:207-217.
doi: 10.18063/ijb.v9i1.623 35. Navarrete I, Fé-Perdomo IL, Ramos-Grez JA, Lopez M.

Volume 2 Issue 2 (2025) 22 doi: 10.36922/IJAMD025100007