Page 27 - IJAMD-2-2

International Journal of AI for
Materials and Design AI-driven material development for AM

(iii) BO for multi-objective design: Active learning References
combined with BO enables the efficient optimization 1. Tan C, Li R, Su J, et al. Review on field assisted metal additive
of material properties while balancing trade-offs manufacturing. Int J Mach Tools Manuf. 2023;189:104032.
between competing factors (e.g., strength versus
ductility and toughness versus printability). doi: 10.1016/j.ijmachtools.2023.104032
2. Su J, Jiang F, Teng J, et al. Recent innovations in laser additive
Acknowledgments manufacturing of titanium alloys. Int J Extreme Manuf.
None. 2024;6(3):032001.
doi: 10.1088/2631-7990/ad2545
Funding 3. Liu Y, Sing SL. A review of advances in additive

This work is fully supported by the Advanced Research manufacturing and the integration of high-performance
and Technology Innovation Centre (ARTIC), National polymers, alloys, and their composites. Mater Sci Addit
University of Singapore, under the grant (project number: Manuf. 2023;2(3):1587.
ADT-RP1). doi: 10.36922/msam.1587

Conflict of interest 4. Su J, Ng WL, An J, Yeong WY, Chua CK, Sing SL.
Achieving sustainability by additive manufacturing:
Wai Yee Yeong is an Editorial Board Member of this A state-of-the-art review and perspectives. Virtual Phys
journal, but was not in any way involved in the editorial Prototyp. 2024;19(1):e2438899.
and peer-review process conducted for this paper, directly doi: 10.1080/17452759.2024.2438899
or indirectly. Swee Leong Sing serves as an Editorial Board 5. Mondal S, Shubhra Goswami S. Machine learning
Member of the journal and as the Guest Editor for the techniques for quality assurance in additive manufacturing
Special Issue to which this paper belongs, but he was not processes. Int J AI Mater Des. 2024;1(2):21.
involved in the editorial or peer-review process for this doi: 10.36922/ijamd.3455
manuscript, either directly or indirectly. Jinlong Su is a
Youth Editorial Board Member of the journal and serves as 6. Su JL, Jiang FL, Teng J, et al. Laser additive manufacturing
a Co-Guest Editor for the same Special Issue, but similarly of titanium alloys: Process, materials and post-processing.
had no involvement in the editorial handling or peer- Rare Met. 2024;43(12):6288-6328.
review of this paper. Separately, other authors declared doi: 10.1007/s12598-024-02685-x
that they have no known competing financial interests or 7. Seo E, Sung H, Jeon H, et al. Laser powder bed fusion
personal relationships that could have influenced the work for AI assisted digital metal components. Virtual Phys
reported in this paper. Prototyp. 2022;17(4):806-820.
Author contributions doi: 10.1080/17452759.2022.2068804
8. Kim T, Kim JG, Park S, et al. Virtual surface morphology
Conceptualization: Swee Leong Sing, Jinlong Su generation of Ti-6Al-4V directed energy deposition via
Funding acquisition: Swee Leong Sing conditional generative adversarial network. Virtual Phys
Supervision: Swee Leong Sing, Wai Yee Yeong Prototyp. 2023;18(1):e2124921.
Visualization: Peijie Shangguan doi: 10.1080/17452759.2022.2124921
Writing – original draft: Peijie Shangguan, Huifei Zhou, Xi
Huang 9. Zhang J, Yin C, Xu Y, Sing SL. Machine learning applications
Writing – review & editing: Jinlong Su, Swee Leong Sing, for quality improvement in laser powder bed fusion: A state-
of-the-art review. Int J AI Mater Des. 2024;1(1):26.
Wai Yee Yeong
doi: 10.36922/ijamd.2301
Ethics approval and consent to participate 10. Jin L, Zhai X, Wang K, et al. Big data, machine learning,

Not applicable. and digital twin assisted additive manufacturing: A review.
Mater Des. 2024;244:113086.
Consent for publication doi: 10.1016/j.matdes.2024.113086

Not applicable. 11. Al Rashid A, Ahmed W, Khalid MY, Koç M. Vat
photopolymerization of polymers and polymer composites:
Availability of data Processes and applications. Addit Manuf. 2021;47:102279.

Not applicable. doi: 10.1016/j.addma.2021.102279

Volume 2 Issue 2 (2025) 21 doi: 10.36922/IJAMD025100007